|
SAE AMS QQ A 225/9 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS 4118 : 2014
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
|
SAE AMS QQ P 416 : 2016
|
PLATING, CADMIUM (ELECTRODEPOSITED) |
|
NASM33588:2010
|
NUT, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR |
|
SAE AMS 4123 : 2006
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASME Y14.5 : 2009
|
DIMENSIONING AND TOLERANCING |
|
SAE AMS 4120 : 2002
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
|
ASTM A 29/A29M : 2016 : REDLINE
|
Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
|
SAE AMS QQ A 225/4 : 2017
|
ALUMINUM ALLOY, 2014, BAR, ROD, WIRE AND SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS QQ A 200/2 : 2014
|
ALUMINUM ALLOY 2014, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
SAE J 403 : 2014
|
CHEMICAL COMPOSITIONS OF SAE CARBON STEELS |
|
SAE AMS 5647 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
|
NASM25027:2012
|
NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
|
SAE AMS QQ A 200/11 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
SAE AMS 5080 : 2016
|
STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
|
SAE AMS 5637 : 2012
|
STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
SAE AMS 5688 : 2012
|
STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
|
SAE AS 8879 : 2004
|
SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
|
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
SAE AMS 5024 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
|
ASTM A 493 : 2016 : REDLINE
|
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
SAE AMS5640V:2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
|
SAE AMS 5040 : 2015
|
STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM DEEP FORMING GRADE |
|
SAE AMS 4610 : 2014
|
BRASS, FREE-CUTTING BARS AND RODS 61.5CU - 35ZN - 3.1PB HALF HARD (H02) |
|
SAE AMS QQ A 225/6 : 1998
|
ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS QQ A 225/5 : 1997
|
ALUMINUM ALLOY, 2017, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED |
|
MS20364 Revision C:1969
|
|
|
SAE AMS 5069 : 2001(S2016)
|
STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
|
SAE AMS 5636 : 2006
|
STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |