NF EN 1114-3 : 2001 + A1 2008

Withdrawn

View Superseded by

PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS

Withdrawn date

09-30-2021

Published date

01-12-2013

Publisher

Association Francaise de Normalisation

Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux significatifs
  4.1 Phénomènes dangereux mécaniques
  4.2 Phénomènes dangereux dus à l'énergie électrique
  4.3 Phénomènes dangereux dus aux équipements
      hydrauliques et pneumatiques
  4.4 Phénomènes dangereux dus à une défaillance de parties
      des systèmes de commande relatives à la sécurité
  4.5 Phénomènes dangereux thermiques
  4.6 Phénomènes dangereux dus au bruit
  4.7 Phénomènes dangereux dus à une instabilité
5 Prescriptions de sécurité et/ou mesures de prévention
  5.1 Phénomènes dangereux mécaniques
  5.2 Phénomènes dangereux dus à l'énergie électrique
  5.3 Phénomènes dangereux dus aux équipements
      hydrauliques et pneumatiques
  5.4 Phénomènes dangereux dus à une défaillance de parties
      des systèmes de commande relatives à la sécurité
  5.5 Phénomènes dangereux thermiques
  5.6 Phénomènes dangereux dus au bruit
  5.7 Phénomènes dangereux dus à une instabilité
6 Vérification des prescriptions de sécurité et/ou mesures
  de prévention
7 Informations pour l'utilisation
  7.1 Marquage minimal sur la machine
  7.2 Notice d'instructions
Annexe ZA (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de
          la Directive européenne 98/37/CE
Annexe ZB (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de
          la Directive européenne 2006/42/CE
Bibliographie

Describes the safety requirements for the design and construction of haul-offs used in extrusion lines for processing plastics and rubber for the hazards identified in clause 8.

DevelopmentNote	Indice de classement: E63-607-3PR. (10/2002) 2001 Edition Re-issued in December 2008 & incorporates AMD 1 2008. (12/2008) PR NF EN 1114-3 January 2016. (01/2016)
DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Withdrawn
SupersededBy	NF EN 1114-3:2019

Standards	Relationship
NBN EN 1114-3 : 2001 + A1 2008	Identical
UNI EN 1114-3 : 2009	Identical
NEN EN 1114-3 : 2001 + A1 2008	Identical
NS EN 1114-3 : 2001 + A1 2008	Identical
EN 1114-3:2001+A1:2008	Identical
DIN EN 1114-3:2015-12 (Draft)	Identical
UNE-EN 1114-3:2001	Identical
BS EN 1114-3 : 2001	Identical
I.S. EN 1114-3:2001	Identical
ONORM EN 1114-3 : 2010	Identical
SN EN 1114-3 : 2001 + A1 2009	Identical
DIN EN 1114-3:2010-01	Identical

NF EN 1070 : 1998	SAFETY OF MACHINERY - TERMINOLOGY
NF EN ISO 12100-1 : 2004 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
NF EN 60204-1 : 2006 AMD 1 2009	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
NF EN ISO 3744 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
NF EN 1037 : 1996 + A1 2008	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
NF EN 1760-2 : 2001 + A1 2009	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSING EDGES AND PRESSURE SENSITIVE BARS
NF EN 983 : 1996 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
NF EN 60529 : 92 AMD 2 2014	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 1088 : 1996 + A2 2008	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
NF EN 954-1 : 1997	SAFETY OF MACHINERY - SAFETY RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
NF EN 999 : 1998 + A1 2008	SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
NF EN ISO 11201 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
NF EN ISO 11204 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
NF EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
NF EN 563 : 94 AMD 1 99	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
NF EN 294 : 1992	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
NF EN 418 : 1993	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
NF EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
NF EN 574 : 1997 + A1 2008	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
NF EN 982 : 1996 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
NF EN ISO 12100-2 : 2004 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
NF EN ISO 11688-1 : 2009	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
NF EN 953 : 1997 + A1 2009	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS