NF EN 1555-1 : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
Superseded date
03-15-2023
Published date
01-12-2013
Publisher
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes, définitions, symboles et abréviations
3.1 Termes et définitions
3.2 Symboles
3.3 Abréviations
4 Matière
4.1 Matière des composants
4.2 Composition de PE
4.3 Compatibilité au soudage
4.4 Classification et désignation
4.5 Coefficient global de service (de conception) et
contrainte de calcul
4.6 Matière retraitable et régénérée
Bibliographie
Describes the general aspects of polyethylene (PE) piping systems in the field of the supply of gaseous fuels. It also specifies the test parameters for the test methods referred to in this standard.
| DevelopmentNote |
Indice de classement: T54-065-1. Supersedes NFT 54 065. (05/2004) Together with NF EN 1555-4, NF EN 1555-5, NFT 54 972, NFT 54 973 and NFT 54 969, Supersedes NFT 54 067. Together with NF EN 1555-3, NF EN 1555-5 and NFT 54 969, Supersedes NFT 54 068 and NFT 54 069. Together with NF EN 1555-3, NF EN 1555-5, NFT 54 970 and NFT 54 969, Supersedes NFT 54 079. Together with NF EN 1555-3, NF EN 1555-5, NFT 54 975 and NFT 54 969, Supersedes NFT 54 066. (02/2005) PR NF EN 1555-1 March 2009. (03/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 1555-1 : 2010 | Identical |
| NBN EN 1555-1 : 2010 | Identical |
| BS EN 1555-1:2010 | Identical |
| DIN EN 1555-1:2010-12 | Identical |
| NS EN 1555-1 : 1ED 2010 | Identical |
| SN EN 1555-1 : 2010 | Identical |
| EN 1555-1:2010 | Identical |
| UNE-EN 1555-1:2011 | Identical |
| UNI EN 1555-1 : 2011 | Identical |
| I.S. EN 1555-1:2010-2015 | Identical |
| ONORM EN 1555-1 : 2015 | Identical |
| NFT 54 970 : 2004 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - ELECTROFUSION TAPPING TEES - DESIGN OF TAPPING TEES AND LEAK FLOW RATE FOR THE CUTTER |
| NFT 54 975 : 2004 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS, SUPPLY OF DRINKING WATER, NON-DRINKING WATER, WATER FOR IRRIGATION AND INDUSTRIAL APPLICATIONS - POLYETHYLENE (PE) - AUTOMATIC RECOGNITION SYSTEM FOR ELECTROFUSION USING BAR CODES |
| NFT 54 973 : 2004 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - VALVES - OPERATING EXTENSIONS AND TELESCOPIC EXTENSIONS FOR VALVES |
| NFT 54 972 : 2004 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - VALVES - LEAK TIGHTNESS ANGULAR RANGE AND ADDITIONAL DIMENSIONAL SPECIFICATIONS |
| NFT 54 965 : 2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - SPECIFICATIONS FOR THE PACKAGING, THE STORAGE, THE HANDLING AND THE TRANSPORTATION OF THE PIPES |
| NFT 54 971 : 2003 XP | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - METAL MECHANICAL FITTINGS - DESIGN AND DIMENSIONAL SPECIFICATIONS |
| EN ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| ISO 13953:2001 | Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
| EN ISO 16871:2003 | Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
| ISO 6964:1986 | Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
| EN ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
| EN ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
| EN ISO 15512:2016 | Plastics - Determination of water content (ISO 15512:2016) |
| EN ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008) |
| ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| EN ISO 13478:2007 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007) |
| EN ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| EN ISO 9080:2012 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
| ISO 11414:2009 | Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| ISO 13954:1997 | Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| ISO 11357-6:2008 | Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| ISO 6259-3:2015 | Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes |
| EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| ISO 11413:2008 | Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| EN 12099:1997 | Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN ISO 1183-2:2004 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.