EN 10240:1997
|
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
|
EN 1514-1:1997
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
|
EN 751-3:1996/AC:1997
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
|
EN 817:2008
|
Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications
|
EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C
|
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
|
EN 13443-1:2002+A1:2007
|
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
|
EN 806-1:2000/A1:2001
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
|
EN ISO 15875-3:2003
|
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
|
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
|
EN ISO 15877-3:2009/A1:2010
|
PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS
|
EN ISO 21003-3:2008
|
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
|
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
|
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
|
EN 805:2000
|
Water supply - Requirements for systems and components outside buildings
|
EN 10312:2002/A1:2005
|
WELDED STAINLESS STEEL TUBES FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
|
EN 15161:2006
|
Water conditioning equipment inside buildings - Installation, operation, maintenance and repair
|
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
|
EN 1717:2000
|
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
|
EN ISO 4016:2011
|
Hexagon head bolts - Product grade C (ISO 4016:2011)
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
|
EN 1044 : 1999
|
BRAZING - FILLER METALS
|
EN ISO 4034:2012/AC:2013
|
HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
|
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
|
EN ISO 9453:2014
|
Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)
|
EN ISO 15876-3:2017
|
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017)
|
EN 29454-1:1993
|
Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990)
|
EN 806-2:2005
|
Specification for installations inside buildings conveying water for human consumption - Part 2: Design
|
EN 751-1:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
|
EN 200:2008
|
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
|
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
|
EN 545:2010
|
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
|
EN 10242:1994/A2:2003
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON
|
EN 1111:2017
|
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
|
EN ISO 15874-3:2013
|
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013)
|
EN 10255:2004+A1:2007
|
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
|