• There are no items in your cart

NF ISO 20966 : 2007

Current
Current

The latest, up-to-date edition.

AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
Published date

01-12-2013

Avant-propos
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Exigences d'hygiène et de sécurité
5 Exigences fonctionnelles
  5.1 Généralités
  5.2 Préparation avant la traite
  5.3 Traite
  5.4 Désinfection des trayons après la traite
  5.5 Transport du lait
  5.6 Refroidissement et stockage du lait
6 Nettoyage
7 Instructions pour l'utilisation
8 Gestion
  8.1 Alarmes et notifications
  8.2 Extraction d'informations
9 Surveillance
  9.1 Animaux
  9.2 Désinfection
  9.3 Lait stocké
Annexe A (normative) Exigences de sécurité pour
         les hommes et les animaux
Annexe B (informative) Exemple de méthode
         pour évaluer le nettoyage des trayons
         et des mamelles
Annexe C (informative) Exemple de méthodes pour
         évaluer les systèmes de détection de
         lait considéré comme anormal à cause de
         la présence de sang ou de variations de
         son homogénéité
Bibliographie

La présente Norme internationale spécifie des exigences pour la construction, y compris des exigences d'hygiène et de sécurité et les exigences minimales de performance, ainsi que des essais, pour les installations de traite automatique, qui complètent ceux décrits dans l'ISO 5707 et l'ISO 6690. La présente Norme internationale ne contient pas d'exigences pour la conception du bâtiment abritant l'installation de traite.

DevelopmentNote
Indice de classement: U36-014 PR NF ISO 20966 August 2005. (08/2005)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current

Standards Relationship
ISO 20966:2007 Identical

IEC 60245-1:2003+AMD1:2007 CSV Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
NF EN ISO 12100-1 : 2004 AMD 1 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
NF EN 60204-1 : 2006 AMD 1 2009 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
NF ISO 3918 : 2007 MILKING MACHINE INSTALLATIONS - VOCABULARY
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 60947-5-1 : 2004 AMD 1 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
NF ISO 4413 : 1999 HYDRAULIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
NF ISO 5707 : 2007 MILKING MACHINE INSTALLATIONS - CONSTRUCTION AND PERFORMANCE
NF EN 1088 : 1996 + A2 2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
NF ISO 3600 : 2015 TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT - OPERATOR'S MANUALS - CONTENT AND FORMAT
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
NF EN 60825-1 : 2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
NF EN ISO 11688-2 : 2004 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
NF EN ISO 14159 : 2008 SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
NF EN 13732 : 2013 FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE
NF ISO 4414 : 1999 PNEUMATIC FLUID POWER - GENERAL RULES RELATING TO SYSTEMS
NF EN 60947 4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS
NF EN 61800-1 : 99 COR 1 2000 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
NF EN ISO 12100-2 : 2004 AMD 1 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 61800-1:1997 Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems
NF EN ISO 11688-1 : 2009 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.