EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES - NATIONAL ADDITION TO NF EN 1090-2:2009

Published date

01-12-2013

Publisher

1 Objet et domaine d'application
   1.1 Objet
   1.2 Domaine d'application
2 Références normatives
   2.1 Produits constitutifs
   2.2 Soudage
   2.3 Essais
   2.4 Protection contre la corrosion
   2.5 Calcul et exécution
3 Exigences pour l'exécution
4 Produits constitutifs
   4.1 Généralités
   4.2 Aciers
   4.3 Dimensions des profilés
   4.4 Éléments de fixation mécanique
   4.5 Rivets à chaud
   4.6 Éléments de fixation pour éléments minces
5 Préparation et assemblage
6 Soudage: qualifications existantes
7 Fixations mécaniques
   7.1 Généralités
   7.2 Boulons précontraints
8 Controles: soudage
9 Protection contre la corrosion par système de peinture
   9.1 Certification du personnel chargé des travaux de
       peinture
   9.2 Garantie de la protection
   9.3 Controle des travaux de peinture
10 Épreuve d'un plancher
Annexe A (informative) Assemblages boulonnés: plan de
         serrage
   A.1 Principe
   A.2 Exemples
Annexe B (informative) Épreuve d'un plancher
   B.1 Conditions d'exécution
   B.2 Critère d'acceptation

Le présent document a le même domaine d'application que celui défini dans la NF EN 1090-2 qui est relatif à l'exécution des structures en acier calculées selon les NF EN 1993 et NF EN 1994. La présente norme s'applique également aux structures calculées selon les Règles CM 66 (et additif 80) et normes NF P 22-410, NF P 22-430, NF P 22-460 et NF P 22-470 pendant la période de coexistence des deux codes de calcul.

DevelopmentNote	Indice de classement: P22-101-2/CN. To be read in conjunction with NF EN 1090-2. (07/2009) This is a National Annex to NF EN 1090-2:2009. (10/2011)
DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Current

NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
NFP 98 421 : 2018	ROAD SAFETY BARRIERS - STEEL BN4 SAFETY BARRIERS - COMPOSITION, OPERATION AND MOUNTING REQUIRMENTS

NFE 27 153 : 1952	ROUND HEAD RIVETS
NF EN ISO 4042 : 1999	FASTENERS - ELECTROPLATED COATINGS
NF EN 14399-1 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
NF EN ISO 4032 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
NF EN ISO 4628-5 : 2016	PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 5: ASSESSMENT OF DEGREE OF FLAKING
NF EN ISO 4628-4 : 2016	PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 4: ASSESSMENT OF DEGREE OF CRACKING
NF EN ISO 10684 : 2004	FASTENERS - HOT DIP GALVANIZED COATINGS
NFA 45 205 : 83 FD	IRON AND STEEL - IPE SECTION - PARALLEL FLANGED BEAMS
NF EN 10025 : 1993	PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION NON ALLIES - CONDITIONS TECHNIQUES DE LIVRAISON
NFP 22 410 : 1982	METAL CONSTRUCTION - RIVETED ASSEMBLIES - CONDITIONS OF CONSTRUCTION - DESIGN OF RIVETS
NFE 27 156 : 1983	FASTENERS - STRUCTURAL ROUND HEAD RIVETS
NF EN 473 : 2008	NON DESTRUCTIVE TESTING - QUALIFICATION AND CERTIFICATION OF NDT PERSONNEL - GENERAL PRINCIPLES
NFA 35 503 : 2008	IRON AND STEEL - REQUIREMENTS ON HOT DIP ZINC COATING OF STEEL COMPONENTS
NFA 45 209 : 83 FD	IRON AND STEEL - IPN SECTIONS - DIMENSIONS
NFA 45 202 : 1986	IRON AND STEEL - INCLINED FACE FLANGE SECTIONS (UPN) - DIMENSIONS
NFE 27 681 : 39	CHANNEL IRON CLAMPING PLATES FOR IPN, U OR T SECTIONS
NF EN 10225 : 2009	WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
NF EN 14399-10 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
NF EN ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
NF EN ISO 6789 : 2003	ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - REQUIREMENTS AND TEST METHODS FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND RECALIBRATION PROCEDURE
NF EN 1559-2 : 2014	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
NF EN ISO 4628-2 : 2016	PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 2: ASSESSMENT OF DEGREE OF BLISTERING
NFP 22 470 : 1989	STEEL CONSTRUCTION - WELDED CONNECTIONS - DETAILS AND DESIGN OF WELDS
NF EN 10204 : 2005	METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS
NFP 22 460 : 1979	METAL CONSTRUCTION - JOINTING BY MEANS OF BOLTS WITH CONTROLLED TIGHTENING - STRUCTURES REQUIREMENTS AND CHECKING OF JOINTING
NF EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
NF EN ISO 898-1 : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
NFP 22 430 : 1982	METAL CONSTRUCTION - ASSEMBLY BY NON-PRESTRESSED BOLTS - CONDITIONS OF CONSTRUCTION AND DESIGN OF THE BOLTS
NF EN ISO 15614-1 : 2017	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 1: ARC AND GAS WELDING OF STEELS AND ARC WELDING OF NICKEL AND NICKEL ALLOYS
NF EN ISO 3506-4 : 2010	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS
NF EN 10340 : 2007	STEEL CASTINGS FOR STRUCTURAL USES
NFA 45 255 : 1983	IRON AND STEEL - PARALLEL FLANGE CHANNEL SECTIONS (UAP-SECTIONS)
NF EN ISO 4628-3 : 2016	PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING
NF EN 1559-1 : 2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
NFA 45 201 : 83 FD	IRON AND STEEL - BROAD, PARALLEL-FACED FLANGED BEAMS - DIMENSIONS
DTUP 22-701 : 1966	REGULATIONS FOR THE CALCULATION OF STEEL STRUCTURES (CALLED RULES CM 66)
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES