NFPA 51 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy
04-27-2022
English
01-01-2018
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - Cylinders and Containers
Chapter 5 - Manifolding of Cylinders
Chapter 6 - Piping Systems
Chapter 7 - Protective Equipment,
Hose, and Regulators
Chapter 8 - Acetylene Generators
Chapter 9 - Calcium Carbide Storage
Chapter 10 - Mobile Acetylene Trailer Systems
Annex A - Explanatory Material
Annex B - Informational References
Index
Pertains to the following: (1) Design and installation of oxygen-fuel gas welding and cutting systems and allied processes, systems meeting the criteria in 1.1.5 (2) Utilization of gaseous fuels generated from flammable liquids under pressure where such fuels are used with oxygen (3) Storage on the site of a welding and cutting system installation.
| DocumentType |
Standard
|
| ISBN |
978-145591605-4
|
| Pages |
29
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
| AWS BRH:2007 | BRAZING HANDBOOK |
| NFPA 53M : 1990 | FIRE HAZARDS IN OXYGEN-ENRICHED ATMOSPHERES |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| AWS WHC2.11 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 11: OXYFUEL GAS WELDING |
| AWS C4.6M : 2006 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| NFPA 99B : 2018 | HYPOBARIC FACILITIES |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
| NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 43C : 1986 | STORAGE OF GASEOUS OXIDIZING MATERIALS |
| NFPA 88B : 1997 | REPAIR GARAGES |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 50 : 2001 | BULK OXYGEN SYSTEMS AT CONSUMER SITES |
| NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| NFPA 1 : 2021 | FIRE CODE |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| NFPA 121 : 2001 | FIRE PROTECTION FOR SELF-PROPELLED AND MOBILE SURFACE MINING EQUIPMENT |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| NFPA 85I : 1989 | STOKER OPERATION |
| NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
| API 551 : 2016 | PROCESS MEASUREMENT |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| CSA W117.2 : 2012 : INC : UPD 2 : 2014 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| ICC IFGC CODE AND COMMENTARY : 2015 | IFGC® Code and Commentary |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
| CSA W117.2 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| CSA W117.2 : 2012 : INC : UPD 1 : 2013 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| CAN/CSA-W117.2-12 (R2017) | Safety in welding, cutting, and allied processes |
| NFPA 85F : 1988 | INSTALLATION AND OPERATION OF PULVERIZED FUEL SYSTEMS |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| API RP 1646 : 2017 | SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES |
| NFPA 50A : 1999 | GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| NFPA 85D : 1989 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL FIRED MULTIPLE BURNER BOILER FURNACES |
| AWS C4.4/C4.4M : 2007 | RECOMMENDED PRACTICES FOR HEAT SHAPING AND STRAIGHTENING WITH OXYFUEL GAS HEATING TORCHES |
| AWS C4.6M:2006(R2012) | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| ASTM G 128/G128M : 2015 : REDLINE | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| AWS WHC2.14 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 14: OXYGEN CUTTING |
| NFPA 1 : 2018 | FIRE CODE |
| CGA E 1 : 2016 | STANDARD FOR RUBBER WELDING HOSE AND HOSE CONNECTIONS FOR GAS WELDING, CUTTING, AND ALLIED PROCESSES |
| CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| ASME B31.3:2016 | PROCESS PIPING |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| CGA E 3 : 2008(R2014) | LOW PRESSURE PIPELINE STATION OUTLET/REGULATOR INLET CONNECTION STANDARD |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
| NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| NFPA 1 : 2018 | FIRE CODE |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| CGA G 1.6 : 2011 | STANDARD FOR MOBILE ACETYLENE TRAILER SYSTEMS |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| CGA G 4.1 : 2009 | CLEANING EQUIPMENT FOR OXYGEN SERVICE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.