ONORM EN 13830 : 2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
11-15-2020
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Evaluation of conformity
6 Classification and designation of performances
7 Marking and labelling
Annex A (normative) Equipotentiality test
Annex B (informative) Maintenance
Annex C (informative) Site tests for watertightness
Annex ZA (informative) Clauses of this European standard
addressing the provision of the EU Construction
Product Directive
Bibliography
Describes characteristics of curtain walling and provides technical information on the varying performance requirements which apply throughout Europe and the test criteria and sequence of testing to which the product is subjected, in order to demonstrate conformity.
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| BS EN 13830:2015 | Identical |
| UNE-EN 13830:2016 | Identical |
| UNI EN 13830 : 2005 | Identical |
| NS EN 13830 : 2003 | Identical |
| NBN EN 13830 : 2015 | Identical |
| SN EN 13830 : 2015 | Identical |
| EN 13830:2015 | Identical |
| I.S. EN 13830:2015 | Identical |
| NEN EN 13830 : 2015 | Identical |
| NF EN 13830 : 2015 | Identical |
| ONORM EN ISO 10140-5 : 2014 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 5: REQUIREMENTS FOR TEST FACILITIES AND EQUIPMENT - RAINFALL SOUND (ISO 10140-5:2010 + AMD 1:2014) |
| ONORM EN 1096-4 : 2004 | GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
| ONORM EN ISO 717-1 : 2013 | ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 717-1:2013) |
| ISO 9047:2001 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at variable temperatures |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| ISO 10848-1:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| ONORM EN 12152 : 2002 | CURTAIN WALLING - AIR PERMEABILITY - PERFORMANCE REQUIREMENTS AND CLASSIFICATION |
| ONORM EN ISO 10140-2 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 2: MEASUREMENT OF AIRBORNE SOUND INSULATION |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| ONORM EN 1279-3 : 2003 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 3: LONG TERM TEST METHOD AND REQUIREMENTS FOR GAS LEAKAGE RATE AND FOR GAS CONCENTRATION TOLERANCES |
| ONORM EN 1279-1 : 2004 AC 2006 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 1: GENERALITIES, DIMENSIONAL TOLERANCES AND RULES FOR THE SYSTEM DESCRIPTION |
| ONORM EN ISO 10140-4 : 2010 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 4: MEASUREMENT PROCEDURES AND REQUIREMENTS |
| ONORM EN 13116 : 2001 | CURTAIN WALLING - RESISTANCE TO WIND LOAD - PERFORMANCE REQUIREMENTS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 10590:2005 | Building construction Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| ONORM EN 12153 : 2000 | CURTAIN WALLING - AIR PERMEABILITY - TEST METHOD |
| ISO 11600:2002 | Building construction Jointing products Classification and requirements for sealants |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| ONORM EN ISO 10591 : 2005 | BUILDING CONSTRUCTION - SEALANTS - DETERMINATION OF ADHESION/COHESION PROPERTIES OF SEALANTS AFTER IMMERSION IN WATER |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| ONORM EN 1279-2 : 2003 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION |
| ONORM EN 13501-1 : 2009 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| ISO 12567-1:2010 | Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors |
| ONORM EN 12758 : 2011 | GLASS IN BUILDING - GLAZING AND AIRBORNE SOUND INSULATION - PRODUCT DESCRIPTIONS AND DETERMINATION OF PROPERTIES |
| ONORM EN 13823 : 2015 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| ONORM EN ISO 1716 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| ONORM EN ISO 10140-3 : 2015 | ACOUSTICS - LABORATORY MEASUREMENT OF SOUND INSULATION OF BUILDING ELEMENTS - PART 3: MEASUREMENT OF IMPACT SOUND INSULATION (ISO 10140-3:2010 + AMD 1:2015) |
| ONORM EN ISO 12567-1 : 2010 AC 2010 | THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY THE HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS |
| ISO 10591:2005 | Building construction Sealants Determination of adhesion/cohesion properties of sealants after immersion in water |
| ISO 8340:2005 | Building construction Sealants Determination of tensile properties at maintained extension |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| ISO 9046:2002 | Building construction Jointing products Determination of adhesion/cohesion properties of sealants at constant temperature |
| ISO 10140-3:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| ONORM EN ISO 1182 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
| ONORM EN 13501-2 : 2016 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| ONORM EN 1279-4 : 2002 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEALS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.