PREN 2002-16 : 200P1
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 16: NON-DESTRUCTIVE TESTING - PENETRANT TESTING
Available format(s)
Hardcopy , PDF
Withdrawn date
07-23-2013
Language(s)
English
0 Introduction
1 Scope
2 Normative references
3 Definitions
4 Health and safety
5 Principle
6 Testing requirements
7 Inspection report
Annex A (informative) Relative spectral response
of the human eye
Gives the requirements for penetrant testing of metallic materials for aerospace applications, which is limited to the direction of surface breaking defects, e.g. cracks, laps, seams and inclusions. Applicable when referred to in the EN specification or material standard unless otherwise defined on the drawing, order or inspection schedule.
| Committee |
C5
|
| DocumentType |
Draft
|
| Pages |
7
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN 2002-16:2000-07 (Draft) | Identical |
| DIN EN 2952:1996-03 (Draft) | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS D <= 50 MM, 1270 MPA <= R[M] <= 1550 MPA |
| I.S. EN 4800-004:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| PREN 4700-004 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 4700-005 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4800-006 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| DIN EN 3666:1996-03 (Draft) | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS D <= 50 MM, 1550 MPA <= R[M] <= 1830 MPA |
| BS 5L 101:2011 | Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| BS 2HC 100:2010 | Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS EN 2398:2008 | Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for machined bolts. D ≤ 25 mm |
| 09/30193258 DC : 0 | BS 3TA 28 - SPECIFICATION FOR FORGING STOCK AND WIRE OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 1100-1300 MPA) (LIMITING RULING SECTION 20 MM) |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 3225-4 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 4 - PRE-PRODUCTION AND PRODUCTION PARTS |
| I.S. EN 4800-002:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| NF EN 4700-002 : 2012 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| DIN 29543:1990-10 | Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN EN 2068:1996-04 | AEROSPACE SERIES - ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS - TECHNICAL SPECIFICATION |
| DIN EN 2103-3:1991-11 | AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| DIN EN 2076-3:1990-09 | AEROSPACE SERIES; ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS; TECHNICAL SPECIFICATION; PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS 3L500(2011) : 2011 | PROCEDURE FOR INSPECTION, TESTING AND ACCEPTANCE OF WROUGHT MAGNESIUM BASE ALLOYS |
| I.S. EN 2399:2008 | AEROSPACE SERIES - HEAT RESISTING STEEL FE-PA2601 (X4NICRTIMOV26-15) - R[M] >= 900 MPA - BARS FOR FORGED BOLTS - D <= 25 MM |
| DIN 29547:1990-10 | Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN EN 2067:1996-04 | AEROSPACE SERIES - ROD ENDS WITH SELF-ALIGNING BALL BEARINGS - TECHNICAL SPECIFICATION |
| EN 2103-3 : 1991 | AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATIONS - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| UNI EN 4800-006 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| UNI EN 4800-004 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| UNI EN 4800-002 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| UNI EN 4800-008 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| I.S. EN 2398:2008 | AEROSPACE SERIES - HEAT RESISTING STEEL FE-PA2601 (X6NICRTIMOV26-15) - R[M] >= 900 MPA - BARS FOR MACHINED BOLTS - D <= 25 MM |
| PREN 2961 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED - BAR FOR MACHINED FASTENERS - D <= 50 MM - R[M] >= 1270 MPA |
| I.S. EN 4800-008:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| PREN 3761 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 - SOFTENED AND COLD WORKED - BAR FOR FORGED FASTENERS - D <= 50 MM - 1100 MPA <= R[M] <= 1300 MPA |
| PREN 4800-008 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 8: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| PREN 4800-002 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 2: BAR AND SECTION |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| BS EN 2399:2008 | Aerospace series. Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15). Rm ≥ 900 MPa. Bars for forged bolts. D ≤ 25 mm |
| 09/30193260 DC : 0 | BS 3TA 100 - PROCEDURE FOR INSPECTION, TESTING AND ACCEPTANCE OF WROUGHT TITANIUM AND TITANIUM ALLOYS |
| BS EN 4800-008:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings |
| BS EN 4800-004:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Wire |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| BS EN 4800-002:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Bar and section |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN 2067:1996/AC:1996 | AEROSPACE SERIES - ROD ENDS WITH SELF-ALIGNING BALL BEARINGS - TECHNICAL SPECIFICATION |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 2068:1996/AC:1996 | AEROSPACE SERIES - ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS - TECHNICAL SPECIFICATION |
| EN 2399 : 2008 | AEROSPACE SERIES - HEAT RESISTING STEEL FE-PA2601 (X4NICRTIMOV26-15) - R[M] >= 900 MPA - BARS FOR FORGED BOLTS - D <= 25 MM |
| EN 2545-3 : 1995 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| EN 2289 : 1996 | AEROSPACE SERIES - ROD BODIES IN ALUMINIUM ALLOY FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| EN 2398 : 2008 | Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm ≥ 900 MPa - Bars for machined bolts - D ≤ 25 mm |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
| EN 4800-008:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
| EN 2601 : 1996 | AEROSPACE SERIES - FORK ENDS, ADJUSTABLE - TECHNICAL SPECIFICATION |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN 4800-004 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 4: WIRE |
| PREN 3980 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P8090-T6 - SUPERPLASTIC SHEET FORMINGS (SPF) - 0,8 MM <= A <= 6 MM |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| BS 3TA28(2009) : 2009 | AEROSPACE SERIES - SPECIFICATION FOR FORGING STOCK AND WIRE OF TITANIUM-ALUMINIUM-VANADIUM ALLOY (TENSILE STRENGTH 1100-1300 MPA) (LIMITING RULING SECTION 20 MM) |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| 09/30201792 DC : 0 | BS 2HC 100 - PROCEDURE FOR INSPECTION, TESTING AND ACCEPTANCE OF IRON, NICKEL, COPPER, COBALT AND REFRACTORY METAL BASE ALLOY CASTINGS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| EN 1330-2:1998 | Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods |
| PREN 4179 : 200P5 | AEROSPACE SERIES - QUALIFICATION AND APPROVAL OF PERSONNEL FOR NON-DESTRUCTIVE TESTING |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| EN 1330-1:2014 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| ISO 3452-4:1998 | Non-destructive testing Penetrant testing Part 4: Equipment |
US$65.56
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.