• There are no items in your cart

PREN 54-3 : DRAFT 2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS
Superseded date

07-23-2014

Published date

01-12-2013

Foreword
1 Scope
2 Normative references
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 Requirements
  4.1 Compliance
  4.2 Sound level
  4.3 Frequency and sound pattern
  4.4 Requirements for voice sounders
  4.5 Construction
  4.6 On-site adjustment of the mode of
       operation
  4.7 Durability
  4.8 Marking and data
  4.9 Additional requirements for software
       controlled sounders
5 Tests
  5.1 General
  5.2 Reproducibility
  5.3 Operational performance
  5.4 Durability
  5.5 Dry heat (operational)
  5.6 Dry heat (endurance)
  5.7 Cold (operational)
  5.8 Damp heat, cyclic (operational)
  5.9 Damp heat, steady state (endurance)
  5.10 Damp heat, cyclic (endurance)
  5.11 Sulfur dioxide (SO[2]) corrosion
       (endurance)
  5.12 Shock (operational)
  5.13 Impact (operational)
  5.14 Vibration, sinusoidal (operational)
  5.15 Vibration, sinusoidal (endurance)
  5.16 Electromagnetic compatibility (EMC),
       immunity (operational)
  5.17 Enclosure protection
  5.18 Operational performance for voice
       sounders
  5.19 Voice sounders sequence timing
  5.20 Voice sounders message synchronization
Annex A (normative) - Sound level for fire alarm
        Sounders
  A.1 General
  A.2 Mounting arrangements
  A.3 Instrumentation
  A.4 Background noise level
  A.5 Measurement of sound level
Annex B (normative) - Comparative sound level test
        during environmental conditioning
  B.1 General
  B.2 Test chamber
  B.3 Mounting arrangements
  B.4 Instrumentation
  B.5 Background noise level
  B.6 Test procedure
Annex C (informative) - Sound patterns recommended
        or required in some European countries
  C.1 Introduction
  C.2 Standards references
  C.3 Information on sound patterns
Annex D (informative) - Comparison of flammability test
        requirements in various standards
  D.1 Introduction
  D.2 Relevant standards
  D.3 Vertical burning tests
Annex ZA (informative) - Clauses addressing the provisions
         of the EU Construction Products Directive (89/106/EEC)
  ZA.1 Scope and relevant clauses
  ZA.2 Procedures for the attestation of conformity
       of control and indicating equipment covered
       by this standard
  ZA.3 CE marking and labelling and accompanying
       documentation
  ZA.4 EC certificate and declaration of conformity

Describes the requirements, test methods and performance criteria for fire alarm sounders in a fixed installation intended to signal an audible warning of fire detection and fire alarm systems and the occupants of a building.

Committee
TC 72
DocumentType
Draft
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
09/30184483 DC : 0 Identical

VDI 6010 Blatt 2:2011-05 Technical safety installations - Automation and control of fire protective services

IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
ISO 9001:2015 Quality management systems — Requirements
IEC 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
EN 54-1:2011 Fire detection and fire alarm systems - Part 1: Introduction
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.