SAE AMS 1551 : 2008

Superseded

View Superseded by

CLEANER, TURBINE ENGINE GAS PATH AQUEOUS TYPE

Available format(s)

Hardcopy , PDF

Superseded date

08-11-2020

Language(s)

English

Published date

01-01-2008

Publisher

SAE International

1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

Specifies petroleum distillate-free cleaner in the form of an aqueous-base liquid concentrate or a ready-to-use liquid.

Committee	AMS-J
DocumentType	Standard
Pages	11
PublisherName	SAE International
Status	Superseded
SupersededBy	SAE AMS1551A: 2008(R2017)

SAE AMS 2416 : 2010	PLATING, NICKEL-CADMIUM DIFFUSED
SAE AMS 7273 : 2011	RUBBER: FLUOROSILICONE (FVMQ) HIGH TEMPERATURE FUEL AND OIL RESISTANT FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS
ASTM D 4192 : 2015 : REDLINE	Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
SAE AMS 4049 : 2016	ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 2475H : 2009	PROTECTIVE TREATMENTS, MAGNESIUM ALLOYS
SAE AMS 4911 : 2014	TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED
SAE AMS 5608 : 2016	COBALT ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED
ASTM D 4191 : 2015 : REDLINE	Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D 1141 : 1998 : EDT 1	Standard Practice for the Preparation of Substitute Ocean Water
SAE AMS 4376 : 2011(R2018)	PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-H26) COLD ROLLED AND PARTIALLY ANNEALED
SAE AMS 7276H : 2011	RUBBER: FLUOROCARBON (FKM) HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS
SAE AMS 5504 : 2002	STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 12.5CR (410), ANNEALED
SAE AMS 5536 : 2012	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED
SAE AMS 4037 : 2014	ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED
SAE AMS 7267 : 2001	RINGS, SEALING, SILICONE (VSI) RUBBER, HEAT RESISTANT, LOW COMPRESSION SET, 70-80
SAE AMS 4045 : 2016	ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 5544 : 2014	NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 57NI - 19.5CR - 13.5CO - 4.2MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED
ASTM E 70	TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE
SAE AMS 5510S : 2014	STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED
SAE AMS 7271 : 2010	RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL AND LOW TEMPERATURE RESISTANT 60 - 70
MIL-C-81751 Revision B:1972	Coating, Metallic-Ceramic
SAE AMS 4025 : 2014	ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED
ASTM D 93 : 2016-07	TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
SAE AMS 5046 : 2012	CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025)
SAE ARP 1755 : 2000	EFFECT OF CLEANING AGENTS ON AIRCRAFT ENGINE MATERIALS, STOCK LOSS TEST METHOD
SAE AMS 4916 : 2014	TITANIUM ALLOY SHEET, STRIP, AND PLATE 8AL - 1MO - 1V DUPLEX ANNEALED
SAE AMS 5040 : 2015	Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade
ASTM E 442 : 1991	Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997)
SAE AMS 2470 : 2013	ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS
SAE AMS 5045 : 2015	STEEL, SHEET AND STRIP, 0.25 CARBON, MAXIMUM HARD TEMPER