SAE AMS 2417 : 2013

Superseded View Superseded By

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PLATING, ZINC-NICKEL ALLOY

Publisher: SAE International

Published:

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGMENT
7 REJECTIONS
8 NOTES

Abstract - (Show below) - (Hide below)

Specifies the requirements for electrodeposition of a zinc-nickel alloy and the properties of the deposit.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Superseded
Publisher	SAE International
Pages
ISBN
Committee	AMS B
Supersedes	SAE AMS 2417 : 2010

Standards Referenced By This Book - (Show below) - (Hide below)

MIL C 83867 : B	CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE
MIL DTL 32372/1 : A	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
MS 51517 : C	CROSS, TUBE, 37 DEGREE FLARED
MIL DTL 52525/31 : B	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL
PREN 4854-2 : 200P1	AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES
ISO 13412 : 1997(R2015)	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES
ABMA ISO 14192 : 1998	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES
ABMA ISO 13415 : 1997	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES
ABMA ISO 14201 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES 2 - METRIC SERIES
ABMA ISO 14204 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES
ABMA ISO 14208 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES
MIL DTL 32460/3 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL DTL 32460/8 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MIL DTL 32480/9 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL
MIL DTL 32371/5 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, UNION CROSS, SPHERICAL ON BRANCH
MIL DTL 32371/7 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD
MS 51500 : F	FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED
MIL DTL 52525 : F	FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MIL DTL 52525/5 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL DTL 52525/34 : B	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL DTL 52525/2 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL DTL 32480/1 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE
MIL DTL 32372/4 : A	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
ABMA ISO 14213 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
MIL DTL 32480/2 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE
MIL DTL 18866 : J	FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, GENERAL SPECIFICATION FOR
MS 39202 : G	ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END
MS 39201 : G	NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE
MS 35759 : C	CUPS, GREASE, AUTOMATIC FEED
ABMA ISO 13413 : 1998	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES
ABMA ISO 14221 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
MIL DTL 32464/7 : 0	MALE ADAPTER, 45 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ISO 13415 : 1997(R2015)	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES
MS 39207 : H	ELBOWS, TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE
MS 51819 : E	ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS 51525 : B	FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
MS 39210 : K	NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE
MS 51510 : D	TEE, TUBE, 37 DEGREE FLARED
MIL DTL 52471/10 : B	HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MIL DTL 32480/5 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD
MIL DTL 52525/35 : B	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS 51814 : E	NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC
MIL DTL 32371/10 : 0	FITTINGS, HYDRAULIC TUBE, SLEEVE, DOUBLE ANGLE
MIL DTL 32371/4 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, SPHERICAL ON BRANCH
ABMA ISO 14207 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, LIGHT DUTY - INCH SERIES
MS 51505 : C	ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED
ISO 14208 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES
MS 20762 : D	ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
MIL DTL 32460/1 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL DTL 32464/2 : 0	MALE ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL DTL 32480/4 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS BULKHEAD
ABMA ISO 14191 : 1997	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES
MS 51519 : C	NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED
MIL DTL 52525/45 : 0	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL DTL 52525/39 : B	FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE
MS 51513 : D	TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL DTL 52525/8 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP
MIL DTL 32371/2 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 45 DEGREES ELBOW
MS 51527 : D	FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, 37 DEGREE FLARED
MS 51506 : E	FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED
ABMA ISO 13412 : 1998	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES
ISO 14206:1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES
SAE AS 81934 : 2016	BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
MIL DTL 83796/10 : A	HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL DTL 32464/6 : 0	MALE ADAPTER, UNION CROSS, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
MS 51815 : F	ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS 51523 : C	TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED
MS 39323 : C	FITTING, TUBE, REDUCER: 37 DEGREE FLARE
MIL DTL 52525/7 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
MIL DTL 52525/14 : C	FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT
MIL DTL 83796/12 : 0	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
MIL PRF 83867 : D	CONNECTOR, OXYGEN MASK HOSE, NON-EJECTION TYPE
MIL DTL 6193 : E	JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR
ISO 14203 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES
MIL DTL 32464/4 : 0	MALE ADAPTER, TEE, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON BRANCH, 1500-3000 PSI
MIL DTL 32480 : 0	ADAPTER, HYDRAULIC AND PNEUMATIC, FLARELESS TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
ISO 13417 : 1997(R2015)	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES
MIL DTL 32464/12 : 0	MALE ADAPTER, TEE, 37 DEGREES SPHERICAL TO ANPT, ANPT ON BRANCH, 1500-3000 PSI
MIL DTL 32464/1 : 0	MALE ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ISO 14212 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
ABMA ISO 13414 : 1998	AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES
ABMA ISO 14197 : 1997	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, INTERMEDIATE DUTY - INCH SERIES
MS 51812 : F	NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC
MS 51515 : D	TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED
MS 51511 : D	TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED
MIL DTL 52525/41 : A	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL DTL 52525/42 : B	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT
MS 51817 : E	ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS 51820 : E	ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC
MS 51518 : C	PLUG, MACHINE THREAD, 37 DEGREE FLARED
MIL DTL 32480/8 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL
MIL DTL 32460/4 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MS 39324 : C	ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE
MIL DTL 83796/11 : A	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE
MS 35758 : D	CUPS, GREASE, MANUAL FEED
SAE AS 8952 : 2005	BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING
MS 51813 : E	ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL DTL 83798/2 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 45 DEGREES
MIL DTL 52525/12 : D	FITTINGS, HOSE, SCREW ON TO SPLIT-FLANGE 90 DEGREES BENT
MIL DTL 32460/2 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL DTL 32372/5 : A	FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
MIL DTL 32464/3 : 0	MALE ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MS 51842 : E	ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC
MIL DTL 62011/1 : 0	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1
MIL DTL 83798/5 : E	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 45 DEGREES
MS 39199 : G	NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
ABMA ISO 14211 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
MS 51825 : H	SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
MIL DTL 52525/32 : A	FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MS 51534 : A	REDUCER, TUBE, 37 DEGREE FLARED
MIL B 6039 : E	BEARING, DOUBLE ROW, BALL, SEALED ROD END, ANTI FRICTION, SELF ALIGNING
MIL DTL 52525/44 : 0	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS 51811 : E	TEE, TUBE, FLARELESS TYPE HYDRAULIC
MIL DTL 32480/6 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS BULKHEAD
MIL DTL 32372/8 : A	FITTING, ADAPTER, 45 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
ABMA ISO 14210 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
MIL DTL 32372/9 : A	FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
ISO 13416 : 1997(R2015)	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES
MIL DTL 52525/33 : A	FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE
MIL DTL 32460/6 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL DTL 83796/1 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL DTL 32460 : A	ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL DTL 83798 : D	FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
AN 924 : 0014	NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
MIL DTL 32464/8 : 0	MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MIL DTL 52525/1 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT, SAE-J516 TYPE, FOR ASSEMBLY WITH SAE-J517, TYPE 100R2 HOSE
MS 51528 : B	FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED
MS 51816 : E	ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL DTL 32371/3 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW
MIL DTL 32372/7 : A	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS FEMALE SWIVEL
MS 51501 : C	NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT
MIL DTL 52525/43 : 0	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MS 51521 : C	ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED
MIL DTL 52525/11 : C	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL DTL 32372/6 : A	FITTING, ADAPTER, 90 DEGREE, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS BULKHEAD
MIL DTL 32371/6 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, NIPPLE TUBE, REGULAR HEX, LONG
ABMA ISO 14195 : 1998	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ABMA ISO 14212 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES
ABMA ISO 14203 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES
16/30354035 DC : 0	BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS
MS 51522 : C	ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED
MIL DTL 83796/13 : 0	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS, WITH LOCKWIRE HOLE
MS 51512 : D	TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL DTL 52525/3 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
MS 51531 : B	NUT, TUBE COUPLING, 37 DEGREE FLARED
MS 39322 : B	ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH
MIL DTL 32464/11 : 0	MALE ADAPTER, BULKHEAD, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
ABMA ISO 14220 : 1998	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, LIGHT DUTY - INCH SERIES
MIL DTL 32372 : A	FITTING, ADAPTER, HYDRAULIC AND PNEUMATIC, NPTF TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F
SAE AIR 5479 : 2017	ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR
MS 51509 : D	ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED
MS 39212 : K	SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE
MS 51524 : C	TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
MIL DTL 52525/40 : B	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL DTL 52525/4 : D	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP
MS 51503 : C	ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED
MS 51514 : D	TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED
MS 51502 : C	NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG
MIL DTL 83798/6 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, 90 DEGREES
MIL DTL 62011 : E	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, GENERAL SPECIFICATION FOR
MIL DTL 52471/8 : B	HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE
MIL DTL 32460/9 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MS 51533 : A	SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED
MS 51526 : A	ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG)
MIL DTL 62011/2 : 0	PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, SIDE-MOUNTED CONNECTOR, TYPE 2
MS 51504 : C	ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED
AN 6270 : 0010	HOSE ASSEMBLY - DETACHABLE SWIVEL FITTING, LOW PRESSURE
MIL DTL 52525/38 : B	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL DTL 32372/3 : A	FITTING, ADAPTER, 90 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
MS 51529 : B	FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING
MIL DTL 32372/10 : A	FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS FEMALE RUN TO RUN
ABMA ISO 14196 : 1998	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES
MIL DTL 83796/2 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE
MIL DTL 32464/9 : 0	MALE ADAPTER, TEE, BULKHEAD, HYDRAULIC AND PNEUMATIC TUBE, 37 DEGREES SPHERICAL TO ANPT, 37 DEGREES SPHERICAL ON RUN, 1500-3000 PSI
MS 51818 : E	TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC
SAE AS 7949 : 2004	BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD
MS 20756 : F	FLANGE, SWIVEL, RETAINING
MS 51530 : B	FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED
MIL DTL 32372/11 : A	FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE TO FEMALE RUN TO RUN
MIL DTL 32480/3 : 0	FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, FLARELESS MALE TO ORFS MALE
ABMA ISO 14202 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES
MIL DTL 52525/13 : C	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT
MIL DTL 32464 : A	FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL C 38271 : B	CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P
MIL DTL 32464/10 : 0	MALE ADAPTER, LONG, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC TUBE, LONG HEX, 37 DEGREES SPHERICAL TO ANPT, 1500-3000 PSI
MS 51532 : B	FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
MIL DTL 32372/2 : A	FITTING, ADAPTER, 45 DEGREE ELBOW, HYDRAULIC AND PNEUMATIC, NPTF MALE TO ORFS MALE
MIL DTL 32480/7 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, FLARELESS, MALE TO ORFS, FEMALE SWIVEL
MS 51520 : C	NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED
MIL DTL 83796/4 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE
MIL DTL 52471/1 : C	HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE
ABMA ISO 13417 : 1997	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES
MIL DTL 52525/6 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MIL DTL 83798/1 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, STRAIGHT
MIL DTL 83798/3 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARED, SWIVEL NUT, 90 DEGREES
MIL DTL 32371/1 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, STRAIGHT
MIL DTL 52525/37 : B	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL DTL 52471/2 : C	HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL DTL 52525/16 : D	FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC)
MS 27404 : C	ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
MIL DTL 52471/3 : C	HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE
MS 51841 : E	TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC
MIL DTL 52525/9 : C	FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL DTL 83796/3 : C	HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
MIL DTL 32371 : 0	FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, SPHERICAL TO ORFS CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL DTL 32460/5 : 0	FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL DTL 32460/7 : 0	FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MS 27611 : H	VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE
MIL DTL 32464/5 : 0	MALE ADAPTER, NIPPLE TUBE, HYDRAULIC AND PNEUMATIC, REGULAR HEX, 37 DEGREES SPHERICAL TO NPTF, 1500-3000 PSI
MIL DTL 83798/4 : D	FITTINGS, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, FLARELESS, SWIVEL NUT, STRAIGHT
MS 51507 : D	ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED
MS 51516 : C	TEE, BULKHEAD ON RUN 37 DEGREE FLARED
MIL DTL 32371/9 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, TEE, BULKHEAD, SPHERICAL ON RUN
MS 51508 : D	ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED
MIL DTL 52525/36 : B	FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL DTL 52525/15 : C	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE
PREN 4854-1 : 200P1	AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES
ISO 14201 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES W - METRIC SERIES
PREN 4854-2 : 200P1	AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES
ABMA ISO 14215 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
SAE AS 81819 : 2010	BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR
SAE AS 8914 : 2016	BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION
ABMA ISO 14209 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES
ABMA ISO 14217 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 13413 : 1997(R2015)	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES
PREN 4854-1 : 200P1	AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 1: DIMENSIONS AND LOADS FOR NARROW SERIES
ABMA ISO 14218 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
ISO 14202 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES
MS 20761 : C	ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
SAE AS 81820 : 2014	BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION
SAE AS 83819 : 2013	BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C)
SAE AS 12500 : 2018	CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
PREN 16602-70-14 : DRAFT 2016	SPACE PRODUCT ASSURANCE - CORROSION
ABMA ISO 14206 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES
16/30340711 DC : 0	BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION
ABMA ISO 14194 : 1998	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, HEAVY DUTY - INCH SERIES
ABMA ISO 14219 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ABMA ISO 14193 : 1998	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, INTERMEDIATE DUTY - INCH SERIES
ISO 14216 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
MIL DTL 32371/8 : 0	FITTINGS, HYDRAULIC TUBE, SPHERICAL TO ORFS, MALE ADAPTER, 90 DEGREES ELBOW, BULKHEAD
ISO 14209 : 1998R(2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES
MIL DTL 52525/10 : D	FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
16/30354034 DC : 0	BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS
MIL DTL 32372/12 : A	FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE RUN TO RUN
ISO 13414 : 1997(R2014)	AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES
ISO 14191 : 1998(R2018)	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES
ABMA ISO 14216 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES
ABMA ISO 13416 : 1997	AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES
ISO 14214 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES
SAE AS 82819 : 2013	BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES
ABMA ISO 14214 : 1997	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES
ISO 14210:1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED. TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES
ISO 14192:1998(R2014)	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES
ISO 14204 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES
ISO 14217 : 1998(R2014)	AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES
ISO 14196:1998(R2014)	AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES
BS A401-420(2015) : 2015	AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH) IN VARIOUS MATERIALS
15/30281806 DC : 0	BS A 401 TO A 420 - AEROSPACE SERIES - SPECIFICATION FOR SCREWS, PAN AND 100 DEGREES COUNTERSUNK HEAD, HEXALOBULAR DRIVE RECESS (UNIFIED THREADS BELOW 1/4 INCH), VARIOUS MATERIALS
MIL DTL 52525/17 : C	FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE

Standards Referencing This Book - (Show below) - (Hide below)

ASTM B 504 : 1990	TEST METHOD FOR MEASUREMENT OF THICKNESS OF METALLIC COATINGS BY THE COULOMETRIC METHOD
ASTM B 487 : 1985	TEST METHOD FOR MEASUREMENT OF METAL AND OXIDE COATING THICKNESS BY MICROSCOPICAL EXAMINATION OF A CROSS SECTION
SAE AMS 2759/9 : 2009	HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
ASTM F 519 : 2017-04	TEST METHOD FOR MECHANICAL HYDROGEN EMBRITTLEMENT EVALUATION OF PLATING/COATING PROCESSES AND SERVICE ENVIRONMENTS
ASTM B 253 : 2011	GUIDE FOR PREPARATION OF ALUMINUM ALLOYS FOR ELECTROPLATING
ASTM B 499 : 2009	TEST METHOD FOR MEASUREMENT OF COATING THICKNESSES BY THE MAGNETIC METHOD: NONMAGNETIC COATINGS ON MAGNETIC BASIS METALS
SAE AMS 2750 : 2012	PYROMETRY
ASTM B 571 : 1997	PRACTICE FOR QUALITATIVE ADHESION TESTING OF METALLIC COATINGS
ASTM E 376 : 2011-07	PRACTICE FOR MEASURING COATING THICKNESS BY MAGNETIC-FIELD OR EDDY-CURRENT (ELECTROMAGNETIC) TESTING METHODS
ASTM B 117 : 2016-04	PRACTICE FOR OPERATING SALT SPRAY (FOG) APPARATUS
SAE AS 2390 : 2013(R2019)	CHEMICAL PROCESS TEST SPECIMEN MATERIAL
ASTM B 568 : 1998	TEST METHOD FOR MEASUREMENT OF COATING THICKNESS BY X-RAY SPECTROMETRY

Add To Cart

Product Format

Quantity

add to cart

SAE AMS 2417 : 2013

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?