SAE AMS 2814 : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PACKAGING AND MARKING OF PACKAGES OF WELDING WIRE, PREMIUM QUALITY
Available format(s)
Hardcopy , PDF
Superseded date
09-23-2021
Language(s)
English
Published date
01-01-2011
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Describes spooling and packaging of bare welding wire for ensuring cleanliness and freedom from corrosion, spool sizes and weights of spooled wire, and package weights of cut lengths.
| Committee |
AMS-B
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS4181C:2003(R2014) | ALUMINUM ALLOY, WELDING WIRE, 7.0SI - 0.38MG - 0.10TI (4008 OR 356) |
| SAE AMS 5027 : 2012 | WELDING WIRE 1.05CR - 0.55NI - 1.0MO - 0.08V (0.26 - 0.32C) VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 4191 : 2015 | ALUMINUM ALLOY, WELDING WIRE, 6.3CU - 0.30MN - 0.18ZR - 0.15TI - 0.10V (2319) |
| SAE AMS 5839 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 59NI - 22CR - 2.0MO - 14W - 0.35AL |
| SAE AMS 4233 : 2014 | ALUMINUM ALLOY, WELDING WIRE, 4.5CU - 0.70AG - 0.30MN - 0.25MG - 0.25TI (201) |
| SAE AMS 5803 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB (NB) - 3.6CU CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 6501 : 2017 | STEEL, MARAGING, WELDING WIRE, 18NI - 8.0CO - 4.9MO - 0.40TI - 0.10AL, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5034 : 2015 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 6453 : 2012(S2018) | STEEL, WELDING WIRE, 0.30CR - 1.8NI - 0.40MO - (0.23 - 0.28C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6469 : 2016 | STEEL, WELDING WIRE, 1.75MN - 0.78CR - 2.8NI - 0.85MO - (0.09 - 0.12C), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 5680 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 18.5CR - 11NI - 0.40CB (NB) (SAE 30347) |
| SAE AMS 5826 : 2017 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 15CR - 5.1NI - 0.30CB(NB) - 3.2CU |
| SAE AMS 4244 : 2016 | ALUMINUM ALLOY, WELDING WIRE, 4.6CU - 0.35MN - 0.25MG - 0.22TI FOR WELDING A206.0 TYPE ALLOYS |
| SAE AMS 5786 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62.5NI - 5.0CR - 24.5MO - 5.5FE |
| SAE AMS 5035 : 2014 | STEEL, WELDING WIRE, 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) |
| SAE AMS5808D:2018(R2022) | Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled |
| SAE AMS 5822 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V, VACUUM INDUCTION MELTED |
| SAE AMS 5811 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 30NI - 1.2MO - 2.2TI - 0.25AL - 0.001B - 0.030V (0.01 - 0.03C), VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 4951 : 2017 | TITANIUM WELDING WIRE COMMERCIALLY PURE ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 4245 : 2017 | ALUMINUM ALLOY, WELDING WIRE, 5.0SI - 1.2CU - 0.50MG (C355.0) |
| SAE AMS 5782 : 2013 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 20.5CR - 9.0NI - 0.50MO - 1.5W - 1.2CB - 0.20TI, VACUUM INDUCTION MELTED |
| SAE AMS 5824F : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 17CR - 7.1NI - 1.0AL |
| SAE AMS 6459 : 2012 | STEEL, WELDING WIRE, 1.0CR - 1.0MO - 0.12V (0.18 - 0.23C), VACUUM MELTED |
| SAE AMS 5821 : 2011 | STEEL, CORROSION-RESISTANT, WELDING WIRE 12CR (SAE 51410 MODIFIED) FERRITE CONTROL GRADE |
| SAE AMS 6461L:2001(S2016) | STEEL, WELDING WIRE 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6533 : 2015 | STEEL, WELDING WIRE 2.0CR - 10NI - 14CO - 1.0MO - (0.13 - 0.17C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6456 : 2017 | STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 6468 : 2013 | STEEL, WELDING WIRE, 1.0CR - 10NI - 3.8CO - 0.45MO - 0.08V (0.14 - 0.17C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6452E : 2012(S2017) | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.38 - 0.43C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5802E : 2017 | IRON-NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 41FE - 37.5NI - 14CO - 4.8CB (NB) - 1.5TI, VACUUM MELTED, LOW EXPANSION |
| SAE AMS 5676 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 80NI - 20CR |
| SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE MAM 5822 : 2000 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V VACUUM INDUCTION MELTED |
| SAE AMS 5804 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.3MO - 2.2TI - 0.006B - 0.30V |
| SAE AMS 5808 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 13NI - 2.5MO, HIGH FERRITE GRADE, TRACE ELEMENT CONTROLLED |
| SAE AMS 4955 : 2016 | TITANIUM ALLOY, WELDING WIRE 8AL - 1MO - 1V |
| SAE AMS 5675H : 2014 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 70NI - 2.5MN - 15.5CR - 3.0TI - 7.0FE |
| SAE AMS 6473 : 2006 | STEEL WELDING WIRE 0.88CR - 1.8NI - 1.6CO - 0.42MO - 0.08V (0.28 - 0.33C) (SAE 4330V) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6465 : 2000(S2017) | WIRE, STEEL WELDING, 2.0CR - 10NI - 8.0CO - 1.0MO - 0.02AL - 0.06V (0.10 - 0.14C) (HY-180), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5030K:2003(S2017) | Steel, Welding Wire 0.06 Carbon, Maximum(STABILIZED Aug 2017)<br> |
| SAE AMS 6375 : 2016 | STEEL, WELDING WIRE, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5823 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8CR - 2.8NI - 1.6CO - 1.8MO - 0.32V |
| SAE AMS 6463 : 2013 | WIRE, STEEL WELDING, 18.5NI - 8.5CO - 5.2MO - 0.72TI - 0.10AL, (MARAGE 300), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5800 : 2006 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 54NI - 19CR - 11CO - 10MO - 3.2TI - 1.5AL - 0.006B, VACUUM INDUCTION MELTED |
| SAE AMS 6466 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE, 5.2CR - 0.55MO |
| SAE AMS 5696 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS 5682 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 78NI - 20CR |
| SAE AMS 5830 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR - 42.5NI - 6.0MO - 2.7TI - 0.015B - 35FE |
| SAE AMS 5780 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 15.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5835 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.2MN - 20CR - 2.5CB - 0.48TI, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5028 : 2013 | STEEL, WELDING WIRE, 1.05CR - 0.55NI - 1.0MO - 0.07V (0.34 - 0.40C) (D6AC), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 5832 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 52.5NI - 19CR - 3.0MO - 5.1CB(NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 4246 : 2015 | ALUMINUM ALLOY, WELDING WIRE, 7.0SI - 0.52MG (357) |
| SAE AMS 4956 : 2016 | TITANIUM ALLOY WELDING WIRE, 6AL - 4V, EXTRA LOW INTERSTITIAL, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5796 : 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 10NI - 15W |
| SAE AMS 5831 : 2015 | ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05ZR - 0.05LA - 0.20N |
| SAE AMS 5964 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED |
| SAE AMS 5784 : 2011 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 29CR - 9.5NI |
| SAE AMS 4189 : 2016 | ALUMINUM ALLOY WELDING WIRE, 4.1SI-0.20 MG (4643) |
| SAE AMS 5817 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 13CR - 2.0NI - 3.0W |
| SAE AMS 5692 : 2011 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 19CR - 12.5NI - 2.5MO |
| SAE AMS 5825 : 2017 | STEEL, CORROSION-RESISTANT, WELDING WIRE 16.4CR - 4.8NI - 0.22CB(NB) - 3.6CU |
| SAE AMS 5789 : 2014 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 54CO - 25.5CR - 10.5NI - 7.5W |
| SAE AMS 5029 : 2013 | STEEL, WELDING WIRE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 4952 : 2015 | TITANIUM ALLOY, WELDING WIRE, 6AI - 2SN - 4ZR - 2MO |
| SAE AMS 5829 : 2011 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 56NI - 19.5CR - 16.5CO - 2.5TI - 1.5AL, VACUUM INDUCTION MELTED |
| SAE AMS 5818 : 2013 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 9.0MN - 20CR - 6.2NI - 0.20N |
| SAE AMS 5776 : 2008(R2015) | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 12.5CR (SAE 51410) |
| SAE AMS 5814 : 2011 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 52CO - 20CR - 20NI - 7.5TA, VACUUM MELTED |
| SAE AMS 5778 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 72NI - 15.5CR - 1.0CB(NB) - 2.4TI - 0.70AL - 7.0FE |
| SAE AMS 5679 : 2015 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 73NI - 15.5CR - 2.2CB - 8.0FE |
| SAE AMS 5828 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 57NI - 19.5CR - 13.5CO - 4.2MO - 3.1TI - 1.4AL - 0.006B, VACUUM INDUCTION MELTED, SOLUTION HEAT TREATED |
| SAE AMS 5837G : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 62NI - 21.5CR - 9.0MO - 3.7CB(NB) |
| SAE AMS 4190 : 2015 | ALUMINUM ALLOY, WELDING WIRE 5.2SI (4043) |
| SAE AMS 6462 : 2016 | STEEL, WELDING WIRE, 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) |
| SAE AMS 5805 : 2012 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.004B - 0.30V, VACUUM INDUCTION MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 5794 : 2002(R2013) | IRON ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 31FE - 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N, ANNEALED |
| SAE AMS 4953 : 2015 | TITANIUM ALLOY WELDING WIRE, 5AL - 2.5SN |
| SAE AMS 5966 : 2013 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE, 50NI - 20CR - 20CO - 5.9MO - 2.2TI - 0.45AI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED |
| SAE AMS 4954 : 2017 | TITANIUM ALLOY, WELDING WIRE 6AL - 4V |
| SAE AMS 5798 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18FE |
| SAE AMS 5694 : 2018 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 27CR - 21.5NI |
| SAE AMS 5774 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 16.5CR - 4.5NI - 2.9MO - 0.10N |
| SAE AMS 5812 : 2015 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 15CR - 7.1NI - 2.4MO - 1.0AL, VACUUM INDUCTION MELTED |
| SAE AMS 5840 : 2010 | STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE, 13CR - 8.0NI - 2.3MO - 1.1AL, VACUUM MELTED |
| SAE AMS 5790 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, WELDING WIRE 20CR - 10NI - 0.75CB, HIGH FERRITE GRADE |
| SAE AMS 5836 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, WELDING WIRE, 72NI - 3.0MN - 20CR - 2.5CB(NB) |
| SAE AMS 5788 F: 2012 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, HARD FACING RODS AND WIRE, 62CO - 29CR - 4.5W - 1.2C |
| SAE AMS 6458 : 2016 | STEEL, WELDING WIRE 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS5796F:2018(R2023) | Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni -15W |
| SAE AMS6463G:2023 | Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging |
| AWS A5.02/A5.02M : 2007 | SPECIFICATION FOR FILLER METAL STANDARD SIZES, PACKAGING, AND PHYSICAL ATTRIBUTES |
| SAE AMS 2819 : 2012 | IDENTIFICATION, WELDING WIRE, DIRECT COLOR CODE SYSTEM |
| SAE AMS 2816 : 2013 | IDENTIFICATION, WELDING WIRE, TAB MARKING METHOD |
US$74.34
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.