|
ASTM D 1353 : 2013 : REDLINE
|
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
|
SAE AMS 2473 : 2013
|
CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, GENERAL PURPOSE COATING |
|
SAE AMS C 27725 : 2016
|
COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C) |
|
SAE AMS QQ P 416 : 2016
|
PLATING, CADMIUM (ELECTRODEPOSITED) |
|
A-A-59281 Revision A:2007
|
CLEANING COMPOUND, SOLVENT MIXTURES |
|
SAE AMS 3276 : 2016
|
SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
|
SAE AMS 4911 : 2014
|
TITANIUM ALLOY, SHEET, STRIP, AND PLATE, 6AL - 4 V, ANNEALED |
|
SAE AMS 6419 : 2015
|
STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
|
ASTM D 1613 : 2017 : REDLINE
|
Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
|
SAE AMS3819C : 2007
|
CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES |
|
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
|
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
SAE AMS 4101 : 2012
|
ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
|
MIL-STD-290 Revision H:2013
|
PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
|
SAE AMS T 9046 : 2002
|
TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
|
SAE AMS QQ A 250/4 : 2015
|
ALUMINUM ALLOY 2024, PLATE AND SHEET |
|
SAE AMS QQ A 250/13 : 1997
|
ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET |
|
SAE AMS 4037 : 2014
|
ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
|
MIL-DTL-81381 Revision C:2005
|
WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
|
MIL-PRF-23377 Revision K:2012
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
|
SAE AMS 4045 : 2016
|
ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 3375 : 2012
|
ADHESIVE/SEALANT, FLUOROSILICONE AROMATIC FUEL RESISTANT, ONE-PART ROOM TEMPERATURE VULCANIZING |
|
SAE AS 5127/1 : 2014
|
AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
|
CFR 40(PT63.63.1440-END) : JUL 2004
|
PROTECTION OF ENVIRONMENT |
|
SAE AMS 4202 : 2005
|
ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
|
MIL-PRF-22750 Revision G:2011
|
COATING, EPOXY, HIGH-SOLIDS |
|
SAE AMS 3100 : 2013
|
ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS |
|
A-A-58054 Base Document:1996
|
ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
|
CCC-C-419 Revision G:1989
|
CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED |
|
ASTM D 4420 : 1994
|
Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography) |
|
SAE AMS 5046 : 2012
|
CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025) |
|
SAE AMS 2629 : 2017
|
FLUID, JET REFERENCE |
|
MIL-PRF-83282 Revision D:1997
|
HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
|
SAE AMS 2825 : 1987
|
MATERIAL SAFETY DATA SHEETS |
|
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
ASTM D 1475 : 2013 : REDLINE
|
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
|
SAE AS 5127 : 2013
|
AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
|
FED-STD-595 Revision C:2008
|
COLORS USED IN GOVERNMENT PROCUREMENT |
|
ASTM D 329 : 2007
|
Standard Specification for Acetone |
|
SAE AMS 2470 : 2013
|
ANODIC TREATMENT OF ALUMINUM ALLOYS, CHROMIC ACID PROCESS |