SAE AMS 7490 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RINGS, FLASH WELDED, CORROSION AND HEAT-RESISTANT AUSTENITIC STEELS, AUSTENITIC-TYPE IRON, NICKEL, OR COBALT ALLOYS, OR PRECIPITATION-HARDENABLE ALLOYS
Available format(s)
Hardcopy , PDF
Superseded date
07-17-2020
Language(s)
English
Published date
01-01-2014
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies flash welded rings made of corrosion and heat-resistant austenitic steels and austenitic-type iron, nickel, or cobalt alloys, or precipitation-hardenable alloys.
| Committee |
AMS-F
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 5747 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB(NB) - 2.5TI - 0.70AL - 7.0FE, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5653 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (0.030 MAX C) (316L), SOLUTION HEAT TREATED |
| SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5703 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB - 1.8TI, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5764 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS 5.0MN - 22CR - 12.5NI - 2.2MO - 0.20CB - 0.30N - 0.20V SOLUTION HEAT TREATED |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| SAE AMS 5750 : 2017 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, NICKEL BASE - 15.5CR - 16MO - 3.8W - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| SAE AMS 5771 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 7.0CR - 16.5 MO, SOLUTION HEAT TREATED |
| SAE AMS 5706 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1825 TO 1900 DEGREES F SOLUTION HEAT TREATED |
| SAE AMS 5643 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5667 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE EQUALIZED, PRECIPITATION HARDENABLE |
| SAE AMS 5651 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 25CR - 20NI (SAE 30310), SOLUTION HEAT TREATED |
| SAE AMS 5940 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 34CO - 3.0CR - 28NI - 3.0CB(NB) - 5.5AL - 0.008B - 25.5FE MULTIPLE MELTED, HIGH TEMPERATURE, OXIDATION-RESISTANT, LOW EXPANSION SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5711 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 65NI - 15.8CR - 15.2MO - 0.30AL - 0.05LA, SOLUTION HEAT TREATED |
| SAE AMS 5656F : 2015 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED |
| SAE AMS 5666H : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, EXTRUSIONS, AND RINGS, 62NI - 21.5CR - 9.0MO - 3.65CB (NB), ANNEALED |
| SAE AMS 5701 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5768 : 2018 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0CB - 0.15N - 31FE, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5715 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 60.5NI - 23CR - 14FE - 1.4AL, ANNEALED |
| SAE AMS 5754 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5931 : 2012 | STEEL, BARS, WIRE, FORGINGS, EXTRUSIONS, TUBING, AND RINGS WEAR, GALLING, AND CORROSION RESISTANT - 5.0MN - 3.5SI - 16.5CR - 5.0NI - 0.14N - SOLUTION HEAT TREATED |
| SAE AMS 5755 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 64NI - 5.0CR - 24.5MO - 5.5FE, SOLUTION HEAT TREATED |
| SAE AMS 5716 : 2016 | IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 44FE - 18.5CR - 35.5NI - 1.1SI, SOLUTION HEAT TREATED |
| SAE AMS 5702 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 41.5NI - 16CR - 37FE - 2.9CB (NB) - 1.8TI, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5895 : 2015 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1750 DEGREES F (954 DEGREES C) SOLUTION HEAT TREATED, WELDING GRADE, PRECIPITATION HARDENABLE |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| SAE AMS 5629H : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5652J : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS 25CR - 20NI - 2.0SI (314) SOLUTION HEAT TREATED |
| MIL S 62471 : NOTICE 1 | STEEL, STAINLESS, PRECIPITATION HARDENING (AM 355 (UNS S35500)) |
| SAE AMS 5650 : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 23CR - 13.5NI (309S), SOLUTION HEAT TREATED |
| SAE AMS 5886 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 50NI - 20CR - 20CO - 5.8MO - 2.2TI - 0.45AL CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 2100 DEGREES F (1149 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5772 E: 2016 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 40CO - 22CR - 22NI - 14.5W - 0.07LA, SOLUTION HEAT TREATED |
| SAE AMS 5854 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND RINGS, 61NI - 20.5CR - 8.5MO - 3.4CB(NB) - 1.3TI - 5.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION HEAT TREATED |
| SAE AMS 5662 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5661 : 2012 | NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 42.5NI - 12.5CR - 5.8MO - 2.9TI - 0.015B - 35FE - CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5763E : 2016 | STEEL, CORROSION RESISTANT BARS, FORGINGS, TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.50CB (NB) - 1.5CU, SOLUTION HEAT TREATED |
| SAE AMS 5700G : 2018 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 13.5CR - 13.5NI - 0.35MO - 2.2W, ANNEALED |
| SAE AMS 5441 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5668 : 2012 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 7.0FE - 2.5TI - 1.0CB (NB) - 0.70AL, 2100 DEGREES F (1149 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5663 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5671 : 2013 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5442 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, NI - 18CR - 2.8MO - 5.5CB(NB) - 0.70TI - 1.50AL - 10FE - 9CO - 1W, CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5664 : 2017 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1950 DEGREES F (1066 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS5751F : 1982(S2017) | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| SAE AMS 5708 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, WIRE FORGINGS, AND RINGS, 58NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 1975 DEGREES F (1079 DEGREES C) SOLUTION HEAT TREATED |
| SAE AMS 5887 : 2015 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 54NI - 22CR - 12.5CO - 9.0MO - 1.2AL, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, ANNEALED |
| SAE AMS 5713K : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5759M : 2015 | COBALT ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGING STOCK, FORGINGS, AND RINGS 52CO - 20CR - 10NI - 15W |
| SAE AMS 5934 : 2016 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE |
| SAE AMS 5769 : 2014 | ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 21CR - 20NI - 20CO - 3.0MO - 2.5W - 1.0(CB+TA) - 0.15N - 32FE SOLUTION HEAT TREATED |
| SAE AMS 5707 : 2017 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4AL - 0.05ZR - 0.006B CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED 1825 TO 1900 DEGREES F (996 TO 1038 DEGREES C) SOLUTION, STABILIZATION, AND PRECIPITATION HEAT TREATED |
| SAE AMS 5670 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS - 72NI - 15.5CR - 0.95CB - 2.5TI - 0.70AL - 7.0FE, 1800 DEGREE F (982 DEGREE C) SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE MAM 5706 : 2003 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT, 57NI - 19.5CR - 13.5CO - 4.3MO - 3.0TI - 1.4A1 - 0.006B - 0.05ZR, CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED, 995 DEGREES - 1040 DEGREES C SOLUTION HEAT TREATED |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS 5648 : 2016 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
| SAE AMS 5735 : 1974 | STEEL BARS, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT, 15CR - 26NI - 1. 3MO - 2.1TI - 0.30V, 1800 DEGREES F (982.2 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 5647 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| SAE AMS 5884 : 2016 | IRON-NICKEL ALLOY, BARS, FORGINGS, AND RINGS, 42FE - 37.5NI - 14CO - 4.8CB(NB) - 1.6TI, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE MULTIPLE MELTED, HIGH TEMPERATURE, LOW EXPANSION |
| SAE AMS 5712 : 2016 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 53NI - 19CR - 11CO - 9.8MO - 3.2TI - 1.6AL - 0.006B, VACUUM MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5773 : 2012 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 15CR - 6.5NI - 0.75MO - 0.30 CB (NB) - 1.5CU, CONSUMABLE ELECTRODE REMELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AMS 5877 : 2012 | IRON ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS, 29FE - 22CR - 21NI - 18.5CO - 3.2MO - 2.8W - 0.78TA - 0.30AL - 0.05LA - 0.20N, SOLUTION HEAT TREATED |
| SAE AMS 5717 : 2014 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 45.5NI - 25.5CR - 3.2CO - 3.2MO - 3.2W - 18.5FE SOLUTION HEAT TREATED |
| SAE AMS 5714 : 2018 | ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT-RESISTANT, 73NI - 15.5CR - 2.5TI - 0.70AL - 7.0FE, PRECIPITATION-HARDENABLE |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| ASTM E 103 : 2017 : REDLINE | Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials |
| SAE AMS 5665 : 2012 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS, 74NI - 15.5CR - 8.0FE |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
US$81.42
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.