SAE AMS H 6875 : 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
HEAT TREATMENT OF STEEL RAW MATERIALS
Superseded date
06-01-2019
Published date
01-01-2010
Publisher
Specifies the requirements for heat-treatment of four classes of steel and the requirements for furnace equipment, test procedures and information for heat-treating procedures, heat-treating temperatures and material test procedures.
| Committee |
AMS E
|
| DevelopmentNote |
Supersedes MIL H 6875. (05/2006)
|
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| MIL-H-6875 Revision H:1989 | Similar to |
| SAE AMS 5934/H1000 : 2015 | STEEL, EXTRA HIGH TOUGHNESS, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS 13CR - 8.0NI - 2.2MO - 1.1AL VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1000) |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| SAE AMS 5336 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS 5346 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H925), 180 KSI (1241 MPA) TENSILE STRENGTH (15-5) |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| MIL-STD-867 Revision C:2008 | TEMPER ETCH INSPECTION |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| NASA PRC 2001 : 2011 | PROCESS SPECIFICATION FOR THE HEAT TREATMENT OF STEEL ALLOYS |
| MS27225 Revision C:2007 | Nipple Assembly 45 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| MIL-DTL-85052 Revision B:2005 | CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| SAE AMS 5334 : 2013 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.20MO (0.25 - 0.35C) (SAE 8630 MOD), NORMALIZED AND TEMPERED |
| MIL-DTL-6458 Revision H:2014 | CHAIN ASSEMBLIES, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-DTL-8878 Revision L:2014 | TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| SAE AMS 5622 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE, CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6257 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| SAE AMS 5643 : 2018 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| MIL-STD-2088 Revision B:2007 | BOMB RACK UNIT (BRU), SINGLE STORE, AIRCRAFT |
| MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| MIL-STD-866 Revision C:2007 | Grinding of Chrome Plated Steel and Steel Parts Heat Treated to 180,000 PSI or Over |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| API 6HT : 2013 | HEAT TREATMENT AND TESTING OF CARBON AND LOW ALLOY STEEL LARGE CROSS SECTION AND CRITICAL SECTION COMPONENTS |
| SAE AMS 6300 : 2015 | STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037) |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| NASA PRC 9003 : 2012 | PROCESS SPECIFICATION FOR LASER MARKING & LASER ENGRAVING |
| SAE ARP 4945 : 2013 | AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
| SAE AMS 5356 : 2016 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH |
| API 19G1 : 2010 | SIDE-POCKET MANDRELS |
| SAE AMS 5643/H1100 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100) |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| SAE AMS 2759 : 2014 | HEAT TREATMENT OF STEEL PARTS, GENERAL REQUIREMENTS |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
| API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
| SAE AMS 6327L : 2017 | STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400) |
| SAE AMS 5412 : 2012R(2018) | STEEL CASTINGS, VACUUM MELTED, VACUUM CAST, INVESTMENT, CORROSION RESISTANT 13CR - 8.0NI - 2.2MO - 1.1AI (195,000 PSI (1344 MPA) TENSILE STRENGTH (CONDITION H1000) HOMOGENIZED, SOLUTION, AND PRECIPITATION HEAT TREATED |
| SAE AS 1576 : 2016 | FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC |
| API SPEC 20E : 2017 | ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| SAE AMS 5344 : 2013 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H900), 180 KSI (1241 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 6433 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
| SAE AMS 5343 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 5338 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED |
| API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| SAE AMS 5046 : 2017 | CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025) |
| SAE AMS 6415 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 6414 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5400 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H935), 170 KSI (1172 MPA) TENSILE STRENGTH |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| SAE AMS 5342 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 4.1NI - 0.28CB (NB) - 3.2CU, HOMOGENIZATION, SOLUTION, AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH (17-4) |
| SAE AMS 6417 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| SAE AMS 5659/H1025 : 2013 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 15CR - 4.5NI - 0.30CB (NB) - 3.5CU, CONSUMABLE REMELTED, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| SAE AMS 5643/H1150 : 2013 | STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1150) |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| NASA STD 6016(INT) : 2006 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA JSC 27301 : 2009 | MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| 03/305165 DC : DRAFT MAR 2003 | ISO 17078-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| MIL-DTL-20277 Revision K:2014 | KNIFE, COMBAT; AND SHEATH, GENERAL SPECIFICATION FOR |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| SAE AMS 5629/H1000 : 2015 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, RINGS, AND EXTRUSIONS, 13CR - 8.0NI - 2.2MO - 1.1AL, VACUUM INDUCTION PLUS CONSUMABLE ELECTRODE MELTED, SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1000) |
| SAE AS 4958 : 2013 | PERFORMANCE, NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNJ 16 PITCH THREAD FORM |
| SAE AS 4073 : 2013(R2018) | AIR CYCLE AIR CONDITIONING SYSTEMS FOR MILITARY AIR VEHICLES |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| MIL-DTL-8789 Revision G:2015 | FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| SAE AMS 6409E : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED |
| SAE AMS 5622/H1025 : 2015 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS 16CR - 4.0NI - 0.30CB - 4.0CU SOLUTION HEAT TREATED, PRECIPITATION HARDENED (H1025) CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5368 : 2012 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS 15CR - 4.0NI - 2.3MO - 0.09N SOLUTION HEAT TREATED |
| SAE AMS 6312 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640) |
| SAE AMS 6419 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| SAE AMS 5357 : 2017 | STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
| SAE AMS 5643/H1025 : 2014 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1025) |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| FF-S-1362 Revision A:2014 | STUD, PLAIN, GENERAL PURPOSE |
| ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| SAE AMS 5333 : 2017 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.25MO (0.11 - 0.17C) (SAE 8615), NORMALIZED |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| SAE AMS 6448 : 2013 | STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS 5361G : 2013(S 2019) | STEEL CASTINGS, SAND AND CENTRIFUGAL, CORROSION AND HEAT RESISTANT, 18.5CR - 13.5NI - 2.1MO, SOLUTION HEAT TREATED |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| SAE AMS 6484 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| 08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| SAE AMS 5350 : 2017 | STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| SAE AMS5659S : 2016 | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu<br> |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| 07/30150187 DC : DRAFT AUG 2007 | BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| MS27223 Revision C:2007 | Nipple Assembly 90 Degrees, Adapter, Hose to Tube, Reusable, Hydraulic, Fuel and Oil Lines 1/4 Inch through 2 Inch Tube Sizes |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| SAE AMS 6487 : 2016 | STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
| SAE AMS 5347 : 2014 | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB (NB) - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1000), 150 KSI (1034 MPA) TENSILE STRENGTH (15-5) |
| SAE AMS 5353E : 2007(R2015) | STEEL, CORROSION-RESISTANT, INVESTMENT CASTINGS, 16CR - 1.8NI - 0.08N, AS CAST |
| SAE AMS6474B:2008(S2018) | FORGINGS, HARDENABLE STEELS AND CORROSION-RESISTANT STEELS HEAT-TREATED, FINISHED-PART PROPERTIES SHORT-TRANSVERSE TENSILE STRENGTH AND FRACTURE TOUGHNESS |
| EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.