CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES

Available format(s)

Hardcopy , PDF

Language(s)

French

Published date

04-24-2018

Publisher

SAE International

FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE
5. PACKAGING
6. NOTES
7. NOTES

Specifies corrosion prevention and mitigation aspects in Avionics, Electronics, and Electrical Wire Interconnect Systems (EWIS) from the design through the life cycle of aerospace and other systems.

Committee	G-25
DocumentType	Standard
Pages	21
PublisherName	SAE International
Status	Current

SAE AMS 2416 : 2010	PLATING, NICKEL-CADMIUM DIFFUSED
MIL-M-24041 Revision C:1981	MOLDING AND POTTING COMPOUND
SAE AS 1701 : 2017	LUBRICANT, SOLID FILM
ASTM D 495 : 2014	Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
SAE AMS 2404 : 2013	PLATING, ELECTROLESS NICKEL
ASTM D 3955 : 2013 : REDLINE	Standard Specification for Electrical Insulating Varnishes
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
MIL-STD-883 Revision K:2016	TEST METHOD STANDARD - MICROCIRCUITS
MIL-D-3464 Revision E:1987	DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION
ASTM G 21 : 2015 : REDLINE	Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
SAE AS 4461 : 2016	ASSEMBLY AND SOLDERING CRITERIA FOR HIGH QUALITY/HIGH RELIABILITY SOLDERING WIRE AND CABLE TERMINATION IN AEROSPACE VEHICLES
IPC J STD 001 : F	REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
MIL-DTL-45204 Revision D:2007	Gold Plating, Electrodeposited
MIL-PRF-23586 Revision F:1996	SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL
MIL-STD-810 Revision G:2008	ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
AWS C3.5 : 1999	SPECIFICATION FOR INDUCTION BRAZING
IPC CC 830 : B	QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES
ASTM G 85 : 2011 : REDLINE	Standard Practice for Modified Salt Spray (Fog) Testing
ASTM E 595 : 2015 : REDLINE	Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
SAE AMS S 7124 : 2011	SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES
SAE AMS QQ N 290 : 2015	NICKEL PLATING (ELECTRODEPOSITED)
ASTM B 545 : 2013 : REDLINE	Standard Specification for Electrodeposited Coatings of Tin
MIL-DTL-85054 Revision D:2010	CORROSION PREVENTIVE COMPOUND, WATER-DISPLACING, TRANSPARENT (FORMERLY AMLGUARD)
MIL-STD-1686 Revision C:1995	ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
IPC HDBK 850 : 0	GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF POTTING MATERIALS AND ENCAPSULATION PROCESSES USED FOR ELECTRONICS PRINTED CIRCUIT BOARD ASSEMBLY
MIL-PRF-46002 Revision D:2010	PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED
SAE AMS 2418 : 2017	PLATING, COPPER
IPC WHMA A 620 : B	REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
SAE AMS 2426E : 2013	COATING, CADMIUM VACUUM DEPOSITION
SAE ARP 6400 : 2016	RECOMMENDED PRACTICE FOR PROCESSING AND HANDLING WIRE AND CABLE WITH SILVER PLATED CONDUCTORS AND SHIELDS
MIL-HDBK-454 Revision B:2007	GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-PRF-81309 Revision G:2014	CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
AWS D17.2/D17.2M : 2013	SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS
MIL-DTL-117 Revision H:2001	BAGS, HEAT-SEALABLE
MIL-L-23398 Revision D:1985	LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749
AWS C3.4 : 1999	SPECIFICATION FOR TORCH BRAZING
IPC A 610 : F	ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
MIL-DTL-83488 Revision D:1999	COATING, ALUMINUM, HIGH PURITY
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
SAE AMS 2460 : 2013	PLATING, CHROMIUM
SAE AS 5272 : 2016	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
SAE AMS 2417 : 2013	PLATING, ZINC-NICKEL ALLOY
SAE AS 22759 : 2014	WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
GEIA STD 0005-2 : 2012	MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS
SAE AMS 2413 : 2013	PLATING, SILVER-RHODIUM
SAE AMS C 81562 : 1998	COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED)
ASTM B 679 : 1998	Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ESD S20.20 : 2014	PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
MIL-I-17563 Revision C:1992	IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS
MIL-HDBK-83377 Base Document:1997	ADHESIVE BONDING (STRUCTURAL) FOR AEROSPACE AND OTHER SYSTEMS, REQUIREMENTS FOR
MIL-STD-276 Revision A:1992	IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS
NASA MSFC STD 3029 : 2000	GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS
SAE AS 29606 : 2014	WIRE, ELECTRICAL, STRANDED, UNINSULATED COPPER, COPPER ALLOY, OR ALUMINUM, OR THERMOCOUPLE EXTENSION, GENERAL SPECIFICATION FOR
AWS D17.1 : 2001	SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
SAE AMS 03-28-2 : 2017	PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION
SAE AMS 2401 : 2013	PLATING, CADMIUM, LOW HYDROGEN CONTENT DEPOSIT
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
AWS C3.6 : 1999	SPECIFICATION FOR FURNACE BRAZING
SAE AMS 2759/9 : 2009	HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS
MIL-STD-186 Revision F:2002	PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL-STD-7179 Revision A:2009	Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment
FED-STD-376 Revision B:1993	PREFERRED METRIC UNITS FOR GENERAL USE BY THE FEDERAL GOVERNMENT
SAE AS 50881 : 2015	WIRING AEROSPACE VEHICLE
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
AWS C3.7 : 1999	SPECIFICATION FOR ALUMINUM BRAZING
SAE AMS 2403 : 2015	PLATING, NICKEL, GENERAL PURPOSE
MIL-HDBK-838 Base Document:1997	LUBRICATION OF MILITARY EQUIPMENT
A-A-59877 Base Document:2010	Insulating Compound, Electrical, Embedding
MIL-PRF-8516 Revision G:1997	SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED
SAE AMS P 81728 : 2015	PLATING, TIN-LEAD (ELECTRODEPOSITED)
SAE AMS C 8837 : 2015	COATING, CADMIUM (VACUUM DEPOSITED)
MIL-PRF-46147 Revision D:2008	LUBRICANT, SOLID FILM, AIR CURED, CORROSION INHIBITING
MIL-PRF-6855 Revision F:2009	RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR
SAE AMS 2427 : 2012	ALUMINUM COATING, ION VAPOR DEPOSITION
A-A-59135 Base Document:1997	PACKAGING MATERIAL, SHEET
SAE AMS C 26074 : 2013	ELECTROLESS NICKEL COATINGS
MIL L 87177 : A	LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC
MIL-PRF-46010 Revision H:2013	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
SAE AMS 2526 : 2013	MOLYBDENUM DISULFIDE COATING, THIN LUBRICATING FILM, IMPINGEMENT APPLIED
SAE AIR 4487 : 2011	INVESTIGATION OF SILVER PLATED CONDUCTOR CORROSION (RED PLAGUE)
MIL-I-8574 Revision E:1982	INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF