SN EN 12391-1 : 2003

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Design criteria
  4.1 Data requirements
      4.1.1 Sources of data and information
      4.1.2 Heating appliance information
      4.1.3 Building construction and chimney route
            information
      4.1.4 Local conditions
      4.1.5 Combustion air supply
      4.1.6 Chimney product specification
  4.2 Design requirements
      4.2.1 General
      4.2.2 Designation
      4.2.3 Determination of designation of the chimney
            and connecting flue pipe
      4.2.4 Materials of construction
      4.2.5 Flue size
      4.2.6 Chimney route
5 Installation
  5.1 General
  5.2 Construction
      5.2.1 System chimney
      5.2.2 Relined chimney
      5.2.3 Custom-built-chimney
  5.3 Chimney plate
6 Commissioning
7 Inspection, cleaning and maintenance
  7.1 General
  7.2 Inspection and cleaning
  7.3 Maintenance
Annex A (informative) Example of a metal chimney plate
  A.1 Example of a metal system chimney plate
  A.2 Example of relined metal chimney plate
  A.3 Example of a custom-built chimney plate
Annex B (informative) Example for the determination of
        the designation of a relined chimney
  B.1 Input data for a typical relined chimney
      B.1.1 Existing chimney
      B.1.2 Relining
      B.1.3 Insulation
  B.2 Temperature class designation
      B.2.1 General
      B.2.2 Material characteristic
      B.2.3 Resistance to fire
      B.2.4 Human contact
      B.2.5 Determination of temperature class
  B.3 Pressure class designation
  B.4 Resistance to condensate class designation
  B.5 Corrosion resistance class designation
  B.6 Soot fire resistance class and distance to combustible
      material designation
  B.7 Designation of the relined chimney
  B.8 Example of chimney plate of the relined chimney in
      this Example
Annex C (informative) Example of metal chimney product
        designation
Annex D (normative) Determination of the chimney designation
        for an installed system chimney
  D.1 General
  D.2 Temperature class
  D.3 Pressure class
  D.4 Resistance to condensate class
  D.5 Corrosion resistance class
  D.6 Soot fire resistance class and distance to combustible
      material
Annex E (normative) Determination of the chimney designation
        for relined of custom-built chimneys
  E.1 General
  E.2 Temperature class
  E.3 Pressure class
  E.4 Resistance to condensate class
  E.5 Corrosion resistance class
  E.6 Soot fire resistance class and distance to combustible
      material
Annex F (informative) Material characteristics
Annex G (informative) Location of the chimney outlet
Annex H (informative) Method for calculating the temperature
        of adjacent materials
  H.1 Example for calculation the temperature of adjacent
      materials
Annex I (informative) Checking, handling and site storage
        of materials and components
  I.1 General
  I.2 Checking, handling and site storage of materials and
      components
      I.2.1 Checking on delivery of materials
      I.2.2 Checking before inspection
      I.2.3 Check of existing chimney
      I.2.4 Site handling and storage
      I.2.5 Coordination of work
Annex J (informative) Chimney commissioning test procedure
  J.1 General
  J.2 Flue flow test
  J.3 Smoke test
  J.4 Pressure test
Annex K (informative) Example for the determination of the
        designation of a custom-built chimney
  K.1 Input data for a typical custom-built chimney
      K.1.1 Liner
      K.1.2 Insulation
      K.1.3 Enclosure
  K.2 Temperature class designation
      K.2.1 General
      K.2.2 Material characteristic
      K.2.3 Resistance to fire
      K.2.4 Human contact
      K.2.5 Determination of temperature class
  K.3 Pressure class designation
  K.4 Resistance to condensate class designation
  K.5 Corrosion resistance class designation
  K.6 Soot fire resistance class and distance to combustible
      material designation
  K.7 Designation of the custom-built chimney
  K.8 Example of chimney plate of the custom-built chimney
      in this Example
Annex L (informative) Example of chimney designation
Annex M (informative) Correlation between liner material
        specification and corrosion load in Member States
Bibliography