|
UFC 4-020-01 : 2008
|
UNIFIED FACILITIES CRITERIA - DOD SECURITY ENGINEERING FACILITIES PLANNING MANUAL
|
|
IEEE C37.121-2012
|
GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
|
|
IEEE C37.90-2005
|
IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
|
|
UFC 4-010-01 : 2018
|
UNIFIED FACILITIES CRITERIA - DOD MINIMUM ANTITERRORISM STANDARDS FOR BUILDINGS
|
|
NEMA WC 74 : 2012
|
5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY
|
|
UFC 3-501-01 : 2015
|
UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING
|
|
IEEE C57.12.01-2015 REDLINE
|
IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers
|
|
IEEE/IEC C37.60-2012
|
IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
|
|
IEEE C37.74-2014 REDLINE
|
IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
|
|
UFC 4-211-01N : Change 3
|
UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS: TYPE 1, TYPE 2 AND TYPE 3
|
|
IEEE C37.20.2-2015
|
IEEE Standard for Metal-Clad Switchgear
|
|
NFPA 70B : 2016
|
RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
|
|
IEEE C57.12.00-2015
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
NETA MTS : 2011
|
MAINTENANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
|
|
IEEE C57.96-2013
|
IEEE Guide for Loading Dry-Type Distribution and Power Transformers
|
|
IEEE C37.46-2010
|
IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches
|
|
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
IEEE C57.124 : 1991
|
RECOMMENDED PRACTICE FOR THE DETECTION OF PARTIAL DISCHARGE AND THE MEASUREMENT OF APPARENT CHARGE IN DRY-TYPE TRANSFORMERS
|
|
IEEE C57.98-2011
|
IEEE Guide for Transformer Impulse Tests
|
|
IEEE 80-2013 REDLINE
|
IEEE Guide for Safety in AC Substation Grounding
|
|
IEEE C2-2017
|
NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)
|
|
NFPA 70E : 2018
|
ELECTRICAL SAFETY IN THE WORKPLACE
|
|
IEEE C57.12.51-2008
|
IEEE Standard for Ventilated Dry- Type Power Transformers, 501 kVA and Larger, Three-Phase, with High- Voltage 601 V to 34 500 V; Low- Voltage 208Y/120 V to 4160 V- General Requirements
|
|
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE
|
|
NEMA TC 7 : 2016
|
SMOOTH-WALL COILABLE ELECTRICAL POLYETHYLENE CONDUIT
|
|
IEEE C57.12.91-2011
|
IEEE Standard Test Code for Dry-Type Distribution and Power Transformers
|
|
IEEE C57.12.34-2015 REDLINE
|
IEEE Standard Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
|
|
IEEE C37.41-2008 REDLINE
|
IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices
|
|
IEEE C37.04-1999
|
IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
|
|
IEEE C57.12.28-2014
|
IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity
|
|
IEEE C37.06-2009
|
IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
|
|
UFC 3-530-01 : Change 3
|
UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS
|
