UL 514A:11ED 2013-02
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Metallic Outlet Boxes
Available format(s)
Hardcopy
Superseded date
11-14-2018
Language(s)
English
Published date
02-01-2013
Publisher
Preface
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 Marking
6 Instructions
7 Dimensions and volume
8 Provisions for grounding
9 Construction requirements
10 Resistance to ingress of solid objects
11 Resistance to ingress of water in marine use
and other wet locations
12 Product testing
13 Corrosion protection
14 Tests on alternate corrosion protection systems
ANNEX A (normative) - Component Standards
ANNEX B (normative) - Tests on Alternate Corrosion
Protection Systems
Pertains to metallic OUTLET BOXES, flush-DEVICE BOXES, FLOOR BOXES, CONCRETE BOXES, EXTENSION RINGS, covers, CONDUIT BODIES, BAR HANGERS, bar-hanger assemblies, and all accessories whose principal function is for support of boxes.
| DevelopmentNote |
Also numbered as CSA C22.2.18.1. (02/2004) Also numbered as NMX-J-023/1-ANCE. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Underwriters Laboratories
|
| Status |
Superseded
|
| Supersedes |
| CSA C22.2 No. 107.3 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS |
| SAE J 2698 : 2014 | PRIMARY SINGLE PHASE NOMINAL 120 VAC WIRING DISTRIBUTION ASSEMBLY DESIGN - TRUCK AND BUS |
| UL 1647:6ED 2015-08 | Motor-Operated Massage and Exercise Machines |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| C22.2 NO. 280-16 | Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016) |
| CSA C22.2 No. 18-4 : 2004 : INC : AMD 2 : 2009 | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| UL 1323:4ED 2007-04 | Scaffold Hoists |
| UL 1431:3ED 2011-03 | Personal Hygiene and Health Care Appliances |
| UL 497C:2ED 2001-08 | Protectors for Coaxial Communications Circuits |
| UL 365:5ED 2018-01 | Standard for Police Station Connected Burglar Alarm Units and Systems |
| CSA C22.2 No. 184.1 : 2015 | SOLID-STATE DIMMING CONTROLS |
| UL 296:11ED 2017-02 | Oil Burners |
| UL 60730-1:5ED 2016-08 | Automatic Electrical Controls - Part 1: General Requirements |
| UL 636:11ED 2018-01 | Standard for Holdup Alarm Units and Systems |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| CSA C22.2 No. 111 : 2010 : R2015 | GENERAL-USE SNAP SWITCHES |
| CSA C22.2 No.111 : 2010 | GENERAL-USE SNAP SWITCHES |
| CSA C22.2 No. 111 : 2010 : INC : UPD 1 : 2012 | GENERAL-USE SNAP SWITCHES |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| NEMA OS 1 : 2013 | SHEET-STEEL OUTLET BOXES, DEVICE BOXES, COVERS, AND BOX SUPPORTS |
| NEMA DC 20:1992(R2003,R2009,R2014) | Residential Controls—Class 2 Transformers |
| NEMA DC 3:2013 | Residential Controls—Electrical Wall-Mounted Room Thermostats |
| NEMA PR 4 : 83(R1989) | PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE |
| ANSI/NEMA FB 11-2000 | PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS |
| NEMA UC 2:1993 (R2000, R2005, R2010, R2015) | UNDERCARPET POWER DISTRIBUTION SYSTEMS |
| CSA C22.2 No. 63 : 1993 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
| CSA C22.2 No. 63 : 1993 : R2013 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
| C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| UL 507:10ED 2017-11 | Electric Fans |
| CSA C22.2 No. 284 : 2016 | NONINDUSTRIAL PHOTOELECTRIC SWITCHES FOR LIGHTING CONTROL |
| UL 1897:7ED 2015-09 | Uplift Tests for Roof Covering Systems |
| CSA C22.2 No. 112 : 2015 | ELECTRIC CLOTHES DRYERS |
| UL 506:14ED 2017-06 | Specialty Transformers |
| UL 2106:2ED 2006-04 | Standard for Field Erected Boiler Assemblies |
| UL 1682:5ED 2017-02 | Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type |
| UL 727:10ED 2018-01 | Standard for Oil-Fired Central Furnaces |
| UL 183:4ED 2009-09 | Manufactured Wiring Systems |
| UL 1559:5ED 2011-03 | Insect-Control Equipment - Electrocution Type |
| UL 921 : 7 | COMMERCIAL DISHWASHERS |
| UL 621:7ED 2010-05 | Ice Cream Makers |
| UL 771:9ED 2006-10 | Night Depositories |
| UL 291:6ED 2012-02 | Automated Teller Systems |
| UL 1863:4ED 2004-05 | Standard for Communications-Circuit Accessories |
| CSA C22.2 No. 94.1 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
| CSA C22.2 No. 60335-1:2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| UL 795:8ED 2016-12 | Commercial-Industrial Gas Heating Equipment |
| UL 1963:4ED 2011-06 | Refrigerant Recovery/Recycling Equipment |
| UL 1034:6ED 2011-05 | Standard for Burglary-Resistant Electric Locking Mechanisms |
| UL 773A:6ED 2016-01 | Nonindustrial Photoelectric Switches for Lighting Control |
| UL 1018:6ED 2011-04 | Electric Aquarium Equipment |
| UL 1472:2ED 2015-09 | Solid-State Dimming Controls |
| UL 1047:6ED 2015-10 | Standard for Isolated Power Systems Equipment |
| UL 496:14ED 2017-09 | Lampholders |
| UL 1778:5ED 2014-06 | Uninterruptible Power Systems |
| UL 1340:3ED 2016-10 | Hoists |
| UL 343:9ED 2008-12 | Pumps for Oil-Burning Appliances |
| UL 729:6ED 2003-08 | Oil-Fired Floor Furnaces |
| UL 50:13ED 2015-10 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| UL 1023:7ED 2017-09 | Household Burglar-Alarm System Units |
| UL 778:6ED 2016-07 | Motor-Operated Water Pumps |
| UL 307B:5ED 2006-10 | Standard for Gas-Burning Heating Appliances For Manufactured Homes and Recreational Vehicles |
| UL 2096:3ED 2006-10 | Standard for Commercial/Industrial Gas and/or Oil-Burning Assemblies With Emission Reduction Equipment |
| UL 775:3ED 1998-02 | Standard for Graphic Arts Equipment |
| UL 609:12ED 2018-03 | Standard for Local Burglar Alarm Units and Systems |
| UL 635:3ED 2012-03 | Insulating Bushings |
| UL 731:6ED 2018-01 | Oil-Fired Unit Heaters |
| CAN/CSA-C22.2 NO. 60335-1:11 (R2016) | Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
| UL 60335-1:6ED 2016-10 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| UL 858:16ED 2014-11 | Household Electric Ranges |
| ANSI Z83.21 : 2016 | COMMERCIAL DISHWASHERS |
| CSA C22.2 No. 167 : 2017 | HOUSEHOLD DISHWASHERS |
| CSA C22.2 No. 63 : 1993 : INC : UPD 6 : 2012 : R200800 | HOUSEHOLD REFRIGERATORS AND FREEZERS |
| C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
| CSA C22.2 No. 18-4 : 2004 : R2009 : FR | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| CSA C22.2 No. 168 : 2016 | COMMERCIAL DISHWASHERS |
| IEEE 628-2011 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
| UL 634:9ED 2007-10 | Standard for Connectors and Switches for Use with Burglar-Alarm Systems |
| UL 1447:6ED 2017-10 | Standard for Electric Lawn Mowers |
| UL 60079-0:6ED 2013-07 | Explosive Atmospheres - Part 0: Equipment - General Requirements |
| UL 82:9ED 2017-08 | Electric Gardening Appliances |
| UL 514D:2ED 2013-06 | Cover Plates for Flush-Mounted Wiring Devices |
| UL 541:9ED 2016-04 | Refrigerated Vending Machines |
| UL 1008A:2ED 2017-09 | Transfer Switch Equipment, Over 1000 Volts |
| UL 603:5ED 2008-02 | Standard for Power Supplies for Use with Burglar-Alarm Systems |
| UL 1090:7ED 2016-10 | Electric Snow Movers |
| UL 639:8ED 2007-08 | Standard for Intrusion-Detection Units |
| UL 325:7ED 2017-05 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
| UL 961:5ED 2014-12 | Standard for Electric Hobby and Sports Equipment |
| CSA C22.2 NO. 178.3:17 | Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A) |
| C22.2 NO. 243-17 | Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
| CSA C22.2 No. 169 : 2015 | ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
| C22.2 NO. 236-15 | Heating and cooling equipment (Bi-national standard with UL 1995) |
| CSA C22.2 No. 18-4 : 2004 : R2013 | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| CSA C22.2 No. 94.1 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
| UL 50:13ED 2015-10 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| IEC 60417-1:2002 | Graphical symbols for use on equipment - Part 1: Overview and application |
| C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
| ASTM G 153 : 2013 : REDLINE | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| CSA C22.2 No. 0.5 : 2016 | THREADED CONDUIT ENTRIES |
| NFPA 302 : 2010 | PLEASURE AND COMMERCIAL MOTOR CRAFT |
| UL 6 : 2014 | ELECTRICAL RIGID METAL CONDUIT - STEEL |
| UL 514C:4ED 2014-04 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| CSA C22.2 No. 56 : 2013 | FLEXIBLE METAL CONDUIT AND LIQUID-TIGHT FLEXIBLE METAL CONDUIT |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| UL 746A:6ED 2012-09 | Polymeric Materials - Short Term Property Evaluations |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| CSA C22.2 NO. 85:14 (R2018) | Rigid PVC boxes and fittings |
| UL 1332:5ED 2016-02 | Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment |
| CSA C22.2 No. 94.2 : 2015 | ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS |
US$1,007.98
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.