|
EN 50399 : 2011 AMD 1 2016
|
COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
|
|
UL 1685:4ED 2015-07
|
Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables
|
|
NFPA 262 : 2015
|
METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
|
|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
|
ISO 12136:2011
|
Reaction to fire tests — Measurement of material properties using a fire propagation apparatus
|
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
|
IEC 60695-4:2012
|
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
|
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
|
EN 50289-4-11:2002
|
Communication cables - Specifications for test methods - Part 4-11: Environmental test methods - A horizontal integrated fire test method
|
|
305/2011 : 2011 AMD 2 2014
|
REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE)
|
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
|
IMO IE110 : 2009
|
SOLAS (CONSOLIDATED EDITION)
|
|
EN 60695-1-10:2017
|
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
|
|
ASTM D 6113 : 2016 : REDLINE
|
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
|
|
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
|
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
|
IEC 60695-1-12:2015
|
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
|
|
ASTM E 906 : 2009
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
|
|
ISO 24473:2008
|
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
|
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
|
EN 60695-8-1:2017
|
Fire hazard testing - Part 8-1: Heat release - General guidance
|
|
ISO/IEC Guide 51:2014
|
Safety aspects Guidelines for their inclusion in standards
|
|
EN 60332-3-10:2009
|
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
|
|
EN 60695-4:2012
|
FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012)
|
|
IEC GUIDE 104:2010
|
The preparation of safety publications and the use of basic safety publications and group safety publications
|
|
ASTM D 7309 : 2013 : REDLINE
|
TEST METHOD FOR DETERMINING FLAMMABILITY CHARACTERISTICS OF PLASTICS AND OTHER SOLID MATERIALS USING MICROSCALE COMBUSTION CALORIMETRY
|
|
IEC 60695-8-1:2016
|
Fire hazard testing - Part 8-1: Heat release - General guidance
|
|
EN ISO 13943:2017
|
Fire safety - Vocabulary (ISO 13943:2017)
|
|
EN 60695-1-11:2015
|
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
|
|
IEC 60695-1-11:2014
|
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment
|
|
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
|
|
IEC 60695-1-10:2016
|
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
|
|
IEC 60332-3-10:2000+AMD1:2008 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
|
|
ASTM E 1354 : 2017 : REDLINE
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.