Name: UNI EN 14439 : 2009
Brand: UNI

CRANES - SAFETY - TOWER CRANES

Published date

07-09-2009

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 General
  5.2 Design requirements on the load bearing structure
  5.3 Design requirements for equipment
  5.4 Design requirements for health and safety
  5.5 Noise reduction
6 Verification of the safety requirements and/or protective
  measures
  6.1 General
  6.2 Method of verification
  6.3 Fitness for purpose
  6.4 Noise measurement
7 Information for use
  7.1 General
  7.2 Instructions handbook
  7.3 Marking
Annex A (normative) Stability requirements
Annex B (informative) Requirements for the provision of
         anti-collision on tower crane
Annex C (normative) Outside indicators on the crane
Annex D (normative) Verification of the safety requirements
         and/or protective measures
Annex E (normative) Noise test code
Annex F (normative) Climbing system
Annex G (informative) Marking - Example of layout
Annex H (informative) Selection of a suitable set of crane
         standards for a given application
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Describes safety requirements? for tower cranes and for climbing systems used with the tower cranes/masts of tower cranes for which they have been designed.

DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 14439 : 2007

Standards	Relationship
BS EN 14439 : 2006	Identical
NS EN 14439 : 2006 + A2 2009	Identical
NBN EN 14439 : 2007 + A2 2009	Identical
NEN EN 14439 : 2007 + A2 2009	Identical
NF EN 14439 : 2007 + A2 2009	Identical
SN EN 14439 : 2007 + A2 2009	Identical
I.S. EN 14439:2006	Identical
DIN EN 14439:2010-03	Identical
EN 14439:2006+A2:2009	Identical
DIN EN 14439:2010-03	Identical

EN 13557:2003+A2:2008	Cranes - Controls and control stations
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 4306-1:2007	Cranes — Vocabulary — Part 1: General
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 4310:2009	Cranes — Test code and procedures
ISO 7752-3:2013	Cranes — Control layout and characteristics — Part 3: Tower cranes
1989/336/EEC : 1989	COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 13135-2:2004+A1:2010	Cranes - Equipment - Part 2: Non-electrotechnical equipment
ISO 13200:1995	Cranes Safety signs and hazard pictorials General principles
IEC 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13586:2004+A1:2008	Cranes - Access
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
EN 12644-1:2001+A1:2008	Cranes - Information for use and testing - Part 1: Instructions
EN 60204-32:2008	Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014	Crane safety - General design - Part 2: Load actions
EN 13135-1:2003+A1:2010	Cranes - Equipment - Part 1: Electrotechnical equipment
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 13001-1:2015	Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 4306-3:2016	Cranes Vocabulary Part 3: Tower cranes
ISO 8566-3:2010	Cranes Cabins and control stations Part 3: Tower cranes
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN ISO 11203:2009	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections