• There are no items in your cart

UNI EN 4687 : 2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
Superseded date

03-04-2021

Published date

01-01-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Surface pretreatments
5 Classification
6 Batch release and qualification testing
7 Requirements for fibre reinforced composites
8 Designation

Specifies the requirements for a two components, chromate and lead free epoxy, non corrosion inhibiting primer.

DocumentType
Standard
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Superseded
SupersededBy

Standards Relationship
EN 4687:2012 Identical

ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles
ISO 2811-1:2016 Paints and varnishes — Determination of density — Part 1: Pycnometer method
EN 2334 : 1997 AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS
EN ISO 4628-2:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
MIL-PRF-6081 Revision E:2014 LUBRICATING OIL, JET ENGINE
ISO 2812-2:2007 Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
PREN 3847 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
ISO 2811-3:2011 Paints and varnishes — Determination of density — Part 3: Oscillation method
ISO 3675:1998 Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
ISO 6270-1:1998 Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
MIL-PRF-5606 Revision H:2002 HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
EN ISO 1524:2013 Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013)
EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
SAE AMS 1527 : 2014 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING
ISO 1520:2006 Paints and varnishes Cupping test
EN ISO 2811-2:2011 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN 4688:2012 Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application
DEFSTAN 68-10/5(2003) : 2003 CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24
EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
ISO 3678:1976 Paints and varnishes — Print-free test
EN ISO 9514:2005 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005)
EN 4689:2012 Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application
EN ISO 2811-1:2016 Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
EN 2437 : 2001 AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS
EN ISO 2811-3:2011 Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
EN ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
ISO 2811-2:2011 Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
ISO 9117-3:2010 Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini
PREN 4160 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
EN 2101 : 1991 AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS
PREN 3837 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS
MIL-DTL-83133 Revision J:2015 TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
ISO 1518:1992 Paints and varnishes Scratch test
EN ISO 2811-4:2011 Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
SAE AMS 1526 : 2008 CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE
ISO 2812-1:2017 Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
ISO 2811-4:2011 Paints and varnishes Determination of density Part 4: Pressure cup method
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 3251:2008 Paints, varnishes and plastics Determination of non-volatile-matter content
ISO 1519:2011 Paints and varnishes Bend test (cylindrical mandrel)
ISO 3680:2004 Determination of flash/no flash Rapid equilibrium closed cup method
ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
SAE AMS 1533 : 2008 CLEANER FOR EXTERIOR AIRCRAFT SURFACES, GEL-TYPE, SOLVENT-BASE
EN ISO 1518:2000 Paints and varnishes - Scratch test (ISO 1518:1992)
ISO 1524:2013 Paints, varnishes and printing inks Determination of fineness of grind
ISO 9117-1:2009 Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time
ISO 2409:2013 Paints and varnishes Cross-cut test
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
ISO 9514:2005 Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing
EN ISO 3678:1995 Paints and varnishes - Print-free test (ISO 3678:1976)
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
ISO 2813:2014 Paints and varnishes Determination of gloss value at 20, 60 and 85
EN ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
EN ISO 9117-3:2010 Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.