• There are no items in your cart

UNI EN ISO 21068-2 : 2008

Current
Current

The latest, up-to-date edition.

CHEMICAL ANALYSIS OF SILICON-CARBIDE- CONTAINING RAW MATERIALS AND REFRACTORY PRODUCTS - PART 2: DETERMINATION OF LOSS ON IGNITION, TOTAL CARBON, FREE CARBON AND SILICON CARBIDE, TOTAL AND FREE SILICA AND TOTAL AND FREE SILICON
Published date

12-04-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Determination of change in mass
   4.1 General
   4.2 Determination of the loss on drying at
        250 degrees C (LOD[250]) gravimetric method
   4.3 Determination of the loss on calcination in
        argon (LOI[Ar])
   4.4 Determination of the change in mass by heat
        pretreatment in air
   4.5 Determination of the change in mass at
        750 degrees C (LOI[750])
   4.6 Determination of loss on ignition at
        850 degrees C (LOI[850])
   4.7 Determination of loss on ignition at
        1050 degrees C (LOI[1050])
5 Determination of the total carbon content
   5.1 General
   5.2 Combustion techniques
   5.3 Detection techniques
   5.4 Detection methods
6 Determination of free carbon content
   6.1 General
   6.2 Sample decomposition by combustion
   6.3 Detection techniques
   6.4 Direct detection methods
   6.5 Indirect detection methods
   6.6 Direct determination of free carbon
        by wet oxidation
7 Determination of silicon carbide content, SiC
   7.1 General
   7.2 Determination of silicon carbide, SiC,
        by indirect quantitative method
   7.3 Determination of silicon carbide, SiC, by
        direct quantitative method
   7.4 Determination of silicon carbide SiC by
        ignition method at 750 degrees C
   7.5 Determination of silicon carbide, SiC,
        by chemical method
8 Determination of total silicon content via silica
   8.1 Principle
   8.2 Reagents
   8.3 Apparatus
   8.4 Procedure
   8.5 Blank test
   8.6 Calculation
9 Determination of free silicon content
   9.1 Principle
   9.2 Pretreatment with hydrochloric acid
   9.3 Silicon determination by hydrogen evolution
   9.4 Silicon determination by silver displacement
10 Determination of silica content, SiO[2]
   10.1 General
   10.2 Determination of free and/or combined
        silica content, SiO[2]
   10.3 Determination of free silica, SiO[2]
   10.4 Determination of surface silicon dioxide,
        SiO[2]
11 Expression of results
12 Test report
Annex A (informative) - Examples of CRMs for
        calibration of carbon analyser
Bibliography

Describes analytical techniques for the determination of change in mass by thermal treatment at specified temperatures, and methods for the determination of the total carbon content, free carbon, silicon carbide, silicon, total silica and free silica content of silicon-carbide-containing raw materials and refractory products.

Committee
CT 700
DocumentType
Standard
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Current

Standards Relationship
ISO 21068-2:2008 Identical
EN ISO 21068-2:2008 Identical

ISO 10081-1:2003 Classification of dense shaped refractory products Part 1: Alumina-silica
EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
ISO 9286:1997 Abrasive grains and crude Chemical analysis of silicon carbide
ISO 10081-4:2014 Classification of dense shaped refractory products Part 4: Special products
ISO 10081-3:2003 Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbon
ISO 1927:1984 Prepared unshaped refractory materials (dense and insulating) Classification
ISO 10060:1993 Dense, shaped refractory products Test methods for products containing carbon
ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products Part 1: General information and sample preparation
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 10081-2:2003 Classification of dense shaped refractory products Part 2: Basic products containing less than 7 % residual carbon

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.