VDI 2166 Blatt 2:2015-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Planning of electrical installations in buildings - Advice for electric mobility
Hardcopy , PDF
09-04-2020
German - English
10-01-2015
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Energetic requirements
6 Technical integration
7 Charging stations in and at buildings
8 Acceptance/commissioning
9 Operation
Annex
Bibliography
Individual mobility is changing; in addition to pure combustion vehicles, the number of electrically chargeable hybrid vehicles, electric vehicles and electrically powered or electrically assisted two-wheelers is increasing.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
VDE 0122-1 : 2012 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS (IEC 61851-1:2010) |
DIN EN 61851-1 : 2012 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS (IEC 61851-1:2010) |
DIN VDE 0100-534 : 2016-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST TRANSIENT OVERVOLTAGES (IEC 60364-5-53:2001/A2:2015, MODIFIED) |
VDE 0510 : 1977 | VDE SPECIFICATION FOR ELECTRIC STORAGE BATTERIES & BATTERY PLANTS |
HD 60364-4-443:2016 | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances - Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching |
HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
VBG 4 : 1997 | ELECTRICAL EQUIPMENT AND OPERATING EQUIPMENT |
IEC 62196-2:2016 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
EN 61851-23:2014/AC:2016-06 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014/COR1:2016) |
EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
IEC 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
VDE 0105-100 : 2015 AMD 1 2017 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 100: GENERAL REQUIREMENTS |
IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
VDE 0666-10 : 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) (IEC 62752:2016) |
EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
HD 60364-4-42 : 2011 AMD 1 2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014) |
VDE 0185-305-2:2013-02 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010) |
DIN EN 61851-21-2 : DRAFT 2013 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-2: EMC REQUIREMENTS FOR OFF BOARD ELECTRIC VEHICLE CHARGING SYSTEMS (IEC 69/220/CD:2012) |
VDS 2010 : 2015 | |
VDI 4700-1 : 2015 COR 1 2015 | Terminology of civil engineering and building services - Corrigendum concerning guideline VDI 4700 Part 1:2015-10 |
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
DIN EN 61851-21 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLES CONDUCTIVE CHARGING SYSTEM - PART 2-1: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY |
IEC 61851-22:2001 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
DIN VDE 0620-1 : 2016 AMD 1 2017 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS ON FIXED SOCKET-OUTLETS |
VDE 0100-722 : 2016 | ERRICHTEN VON NIEDERSPANNUNGSANLAGEN - TEIL 7-722: ANFORDERUNGEN FUER BETRIEBSSTAETTEN, RAEUME UND ANLAGEN BESONDERER ART - STROMVERSORGUNG VON ELEKTROFAHRZEUGEN (IEC 60364-7-722:2015, MODIFIZIERT) |
VDE V 0660-600-7 : 2014-10 | Low-voltage switchgear and controlgear assemblies – Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations (IEC/TS 61439-7:2014) – das Schalten zur Steuerung von Stromkreisen oder Betriebsmitteln.<br> |
VDI 2166 Blatt 1:2017-10 | Planning of electrical installations in buildings - Fundamentals of energy controlling |
VDI 2050 Blatt 5:2010-10 | Requirements at technical equipment rooms - Electrical engineering |
VDE 0122-2-1 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A. C./D. C. SUPPLY |
ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
VDE 0100-534 : 2016-10 | Low-voltage electrical installations Part 5-53: Selection and erection of electrical equipment – Isolation, switching and control – Clause 534: Devices for protection against transient overvoltages<br> |
DIN IEC/TS 61439-7 : 2014-10 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 7: ASSEMBLIES FOR SPECIFIC APPLICATIONS SUCH AS MARINAS, CAMPING SITES, MARKET SQUARES, ELECTRIC VEHICLES CHARGING STATIONS (IEC/TS 61439-7:2014) |
VDI 6004 Blatt 2:2007-07 | Protection of building services - Lightning protection systems and surge protection |
IEC 60364-7-722:2015 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
DIN VDE 0100-722 : 2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES (IEC 60364-7-722:2015, MODIFIED) |
VDI 3551:2011-01 | Electromagnetic compatibility (EMC) in building services |
VDE 0100-442 : 2013-06 | Low-voltage electrical installations Part 4-442: Protection for safety – Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system (IEC 60364-4-44:2007 (Clause 442), modified); German implementation HD 60364-4-442:2012<br> |
EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
HD 60364-4-442:2012 | Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system |
HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
VDE 0100-443:2016-10 | Low-voltage electrical installations - Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances- Clause 443: Protection against transient overvoltages of atmospheric origin or due to switching (IEC 60364-4-44:2007/A1:2015, modified |
EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
VDE-AR-E 2623-2-2 : 2009 | STECKER, STECKDOSEN, FAHRZEUGSTECKVORRICHTUNGEN UND FAHRZEUGSTECKER - LADUNG VON ELEKTROFAHRZEUGEN - TEIL 2-2: ANFORDERUNGEN UND HAUPTMASSE FUER DIE AUSTAUSCHBARKEIT VON STIFT- UND BUCHSENSTECKVORRICHTUNGEN |
VDE 0100-410 : 2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
VDE 0100-430 : 2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
DIN IEC 61000-2-13 : DRAFT 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-13: ENVIRONMENT - HIGH-POWER ELECTROMAGNETIC (HPEM) ENVIRONMENTS - RADIATED AND CONDUCTED |
VDE 0620-1 : 2016 AMD 1 2017 | STECKER UND STECKDOSEN FUER DEN HAUSGEBRAUCH UND AEHNLICHE ANWENDUNGEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN AN ORTSFESTE STECKDOSEN |
DIN EN 61851-22 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLES CONDUCTIVE CHARGING SYSTEM - PART 2-2: AC ELECTRIC VEHICLE CHARGING STATION |
DIN VDE 0100-430:2010-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
VDE 0122-2-3 : 2014 COR 1 2016 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014) |
DIN EN 62305-3:2011-10 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
VDE 0100-444:2010-10 | Low-voltage electrical installations Part 4-444: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances |
DIN EN 61851-23 : 2014 COR 1 2016 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014) |
VDE 0122-2-2 : 2002 | ELECTRICAL EQUIPMENT OF ELECTRIC ROAD VEHICLES - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - AC ELECTRIC VEHICLE CHARGING STATION |
DIN VDE 0100-444 : 2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
DIN VDE 0100-443:2016-10 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-44: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES - CLAUSE 443: PROTECTION AGAINST TRANSIENT OVERVOLTAGES OF ATMOSPHERIC ORIGIN OR DUE TO SWITCHING (IEC 60364-4-44:2007/A1:2015, MODIFIED) |
SAE J 2464 : 2009 | ELECTRIC AND HYBRID ELECTRIC VEHICLE RECHARGEABLE ENERGY STORAGE SYSTEM (RESS) SAFETY AND ABUSE TESTING |
VDI 2074:2014-07 | Recycling in the building services |
DIN EN 62305-2 : 2013-02 | PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT (IEC 62305-2:2010) |
DIN VDE 0100-600 : 2017-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016) |
IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
IEC TS 61439-7:2014 | Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations |
IEC 62305-2:2010 | Protection against lightning - Part 2: Risk management |
EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
IEC 60364-4-42:2010+AMD1:2014 CSV | Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects |
IEC 61851-21-1:2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
IEC 61000-2-13:2005 | Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted |
IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
DIN VDE 0100-442 : 2013-06 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-442: PROTECTION FOR SAFETY - PROTECTION OF LOW-VOLTAGE INSTALLATIONS AGAINST TEMPORARY OVERVOLTAGES DUE TO EARTH FAULTS IN THE HIGH-VOLTAGE SYSTEM AND DUE TO FAULTS IN THE LOW VOLTAGE SYSTEM (IEC 60364-4-44:2007 (CLAUSE 442) |
IEC 61851-21:2001 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
VDE 0839-2-13 : DRAFT 2005 | ELEKTROMAGNETISCHE VERTRAEGLICHKEIT (EMV) - TEIL 2-13: UMGEBUNGSBEDINGUNGEN - UMGEBUNGEN MIT HOHER ELEKTROMAGNETISCHER LEISTUNG (HPEM) - ABGESTRAHLT UND LEITUNGSGEFUEHRT |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.