VDI 2199:2012-01
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
01-01-2012
Preliminary Note
Introduction
1. Scope
2. Buildings
3. Traffic ways inside buildings
4. Traffic ways outdoors.
5. Lifts
6. Designing of battery-charging stations
for electric vehicles
Bibliography
Gives information and calculations shown in this guideline serve as structure planning criteria for aisle widths and roadways.
DocumentType |
Standard
|
Pages |
39
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 2510 Blatt 1:2009-12 | Infrastructure and peripheral installations for Automated Guides Vehicle Systems (AGVS) |
EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
WDK 110-4 : 2000 | INDUSTRIE-LUFT UND -VOLL-REIFEN BESTIMMUNG DES ELEKTRISCHEN ABLEITWIDERSTANDES AM UNMONTIERTEN REIFEN |
VDI 2198:2012-12 | Type sheets for industrial trucks |
DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
DIN 15141-4:1985-11 | TRANSPORTATION CHAIN - PALLETS - FOUR WAY TIMBER PERIMETER-BASE PALLETS - 1000 MM X 1200 MM - BREWERY PALLETS |
DIN EN 12464-2:2014-05 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 2: OUTDOOR WORK PLACES |
VDI 3318:2009-09 | Using freight elevators with industrial trucks |
DIN 4844-1:2012-06 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS |
VDI 3616:2005-08 | Lifting device for traction batteries of industrial trucks 24 V, 48 V, 80 V |
DIN EN 50272-1 : 2011 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 1: GENERAL SAFETY INFORMATION |
VBG 11 : 1998 | RAIL TRACKS |
BGV D 27 : 1997 | INDUSTRIAL TRUCKS |
DIN VDE 0100 : 1973 | ERECTION OF POWER INSTALLATIONS WITH RATED VOLTAGES BELOW 1000 V |
VDI 3577:2009-02 | Industrial trucks for high-bay warehouses - Specification and operating conditions |
AGI J 31-2 : 1991 | ELEKTROTECHNISCHE ANLAGEN - BAUTECHNISCHE AUSFUEHRUNG VON RAEUMEN FUER NICHT ORTSFESTE BATTERIEN - BATTERIELADERAEUME - BATTERIELADESTATIONEN |
BGV D 30 : 1998 | RAIL TRACKS |
DIN 15155:1986-12 | PALLETS - BOX PALLET WITH MESH SIDE PANELS AND 2 FRONTSIDE FLAPS |
DIN 15142-1:1973-02 | LOAD BOARDS; BOX PALLETS, POST PALLETS, PRINCIPAL DIMENSIONS & STACKING DEVICES |
EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
VDS 2259 : 2010 | BATTERIELADEANLAGEN FUER ELEKTROFAHRZEUGE - RICHTLINIEN ZUR SCHADENVERHUETUNG |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
DIN 15185-1:1991-08 | Warehousesystems with guided industrial trucks; requirements on the ground, the warehouse and other requirements |
AGI A 80 : 1995 | INDUSTRIEBOEDEN - IMPRAEGNIERUNG, VERSIEGELUNG, BESCHICHTUNG, REAKTIONSHARZESTRICH |
EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
EN 61340-4-1:2004/A1:2015 | ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS (IEC 61340-4-1:2003/A1:2015) |
VDE 0510-1 : 2011 | SICHERHEITSANFORDERUNGEN AN BATTERIEN UND BATTERIEANLAGEN - TEIL 1: ALLGEMEINE SICHERHEITSINFORMATIONEN |
ASR 17/1-2 : SEP 1988 | |
DIN 15185-2:2013-10 | INDUSTRIAL TRUCKS - SAFETY REQUIREMENT - PART 2: USE IN NARROW AISLES |
WDK 110-2 : 1997 | MESSVERFAHREN ZUR BESTIMMUNG DES ELEKTRISCHEN ABLEITWIDERSTANDES VON LUFT- UND VOLLREIFEN AM FAHRZEUG |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
DIN ISO 23601:2010-12 | Safety identification - Escape and evacuation plan signs (ISO 23601:2009) |
VDI 2409:2003-07 | Gateways in industrial buildings |
EN 12466:1998 | Resilient floor coverings - Vocabulary |
DIN 18225:1988-06 | INDUSTRIAL CONSTRUCTION - TRAFFIC WAYS IN INDUSTRIAL BUILDINGS |
DIN 4844-3:2003-09 | SAFETY MARKING - PART 3: ESCAPE- AND RESCUE-PLAN |
AGI J 31-3 : 1989 | ELEKTROTECHNISCHE ANLAGEN - BAUTECHNISCHE AUSFUEHRUNG VON RAEUMEN FUER BATTERIELADEANLAGEN FUER ELEKTROFAHRZEUGE - EINZELLADEPLAETZE |
VDE 0100 : 1973 | REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
DIN 4844-2:2012-12 | Graphical symbols - Safety colours and safety signs - Part 2: Registered safety signs |
EN 50272-3 : 2002 COR 2003 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES |
DIN EN 61340-4-1 : 2016 | ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS (IEC 61340-4-1:2003 + A1:2015) |
ASR A2.3 : 2007 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.