VDI 2576:2010-01
Current
Current
The latest, up-to-date edition.
Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-01-2010
Publisher
Preliminary note
Introduction
1. Scope
2. Terms and definitions
3. Technology
4. Technical measures of emission control
5. Emission values
6. Instructions for emission measurements
7. Process water and waste water
8. Heat recovery (energy conservation)
9. Recycling/waste disposal
Bibliography
This guideline deals with the generation and reduction of emissions in the carbothermal and metallothermal manufacturing processes that are common today in the ferroalloy and silicon metal industries.
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 2263 Blatt 9:2008-05 | Dust fires and dust explosions - Hazards - assessment - protective measures - Determination of dustiness of bulk materials |
| VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
| VDI 2448 Blatt 1:1992-04 | Planning of spot sampling measurements of stationary source emissions |
| DIN 17560-1:2004-02 | Ferrosilicon and Silicon - Part 1: Technical delivery conditions for ferrosilicon |
| TRGS 905 : 2016 AMD 2017 | VERZEICHNIS KREBSERZEUGENDER, KEIMZELLMUTAGENER ODER REPRODUKTIONSTOXISCHER STOFFE |
| VDI 2263:2017-02 (Draft) | Dust fires and dust explosions - Hazards, assessment, protective measures |
| DIN 17567:2004-02 | Ferroboron - Technical delivery conditions |
| VDI 2262 Blatt 4:2006-03 | Workplace air - Reduction of exposure to air pollutants - Capture of air pollutants |
| VDI 2263 Blatt 3:1990-05 | Dust fires and dust explosions; hazards, assessment, protective measures; pressure-shock-resistant vessels and apparatus; calculation, construction and tests |
| VDI 2263 Blatt 7:2010-07 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in spraying and drying integrated equipment |
| VDI 3673:1979-06 | Pressure release of dust explosions |
| DIN 17569:2004-02 | Ferroniobium - Technical delivery conditions |
| EN 1948-2:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
| VDI 2263 Blatt 5:2014-10 | Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluidized bed dryers |
| VDI 2263 Blatt 8.1:2011-03 | Dust fires and dust explosions - Hazards - assessment - protective measures - Fire and explosion protection on elevators - Examples |
| VDI 2263 Blatt 6.1:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations - Examples |
| DIN EN 1948-4:2014-03 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS |
| DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| VDI 2263 Blatt 8:2008-12 | Dust fires and dust explosions - Hazards - Assessment - Protective measures - Fire and explosion protection on elevators |
| ZH 1/217 : 1991 | |
| DIN 17563:2004-02 | Ferrovanadium - Technical delivery conditions |
| EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| VDI 2263 Blatt 2:1992-05 | Dust fires and dust explosions; hazards, assessment, protective measures; inerting |
| DIN EN 14385:2004-05 | Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| VDI 2263 Blatt 4:1992-04 | Dust fires and dust explosions; hazards, assessment, protective measures; suppression of dust explosions |
| VDI 4220:2011-04 | Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN 13284-2:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems |
| BGR 104 : 2014 | |
| EN 14181:2014 | Stationary source emissions - Quality assurance of automated measuring systems |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 3481 Blatt 4:2007-02 | Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID) |
| VDI 3677 Blatt 1:2010-11 | Filtering separators - Surface filters |
| ZH 1/200 : 1989 | RICHTLINIEN FUER DIE VERMEIDUNG VON ZUENDGEFAHREN INFOLGE ELEKTROSTATISCHER AUFLADUNGEN (RICHTLINIEN "STATISCHE ELEKTRIZITAT") |
| EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
| EN 1948-1:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
| BGR 139 : 2012 | |
| EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| DIN EN 13284-1:2015-12 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| VDI 2263 Blatt 6:2017-08 | Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations |
| BGR 132 : 2004 | VERMEIDUNG VON ZUENDGEFAHREN INFOLGE ELEKTROSTATISCHER AUFLADUNGEN |
| DIN EN 12619:2013-04 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
| VDI 3467:2014-11 | Emission control - Production of carbon and electrographite materials |
| VDI 3679 Blatt 3:2010-06 | Wet separators - Mist eliminators |
| EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| VDI 3676:1999-10 | Inertial Separators |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN 17566:2004-02 | Ferrotitanium - Technical delivery conditions |
| DIN EN 14181:2015-02 | Stationary source emissions - Quality assurance of automated measuring systems |
| DIN 17561:2004-02 | Ferromolybdenum - Technical delivery conditions |
| DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| VDI 2264:2001-07 | Commissioning, operation and maintenance of separator systems for the removal of gaseous and particulate substances from gas streams |
| TRGS 906 : 2005 AMD 2007 | VERZEICHNIS KREBSERZEUGENDER TAETIGKEITEN ODER VERFAHREN NACH KAPITEL 3 ABS. 2 NR. 3 GETSTOFFV |
| DIN 17580:2004-02 | Calcium-Silicon - Technical delivery conditions |
| VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
| VDI 3678 Blatt 1:2011-09 | Electrostatic precipitators - Process and waste gas cleaning |
| DIN EN 13211:2001-06 | AIR QUALITY - STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF THE CONCENTRATION OF TOTAL MERCURY |
| BGR 109 : 2008 | |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| DIN EN 15259:2008-01 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| EN 13211:2001/AC:2005 | AIR QUALITY - STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF THE CONCENTRATION OF TOTAL MERCURY |
| DIN 17564:2004-02 | Ferromanganese, Ferromanganese-Silicon and Manganese - Technical delivery conditions |
| VDI 3950:2006-12 | Stationary source emissions - Quality assurance of automated measuring and electronic data evaluation systems |
| DIN 17562:2004-02 | Ferrotungsten - Technical delivery conditions |
| DIN 17560-2:2004-02 | FERROSILICON AND SILICON - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SILICON |
| VDI 2263 Blatt 1:1990-05 | Dust fires and dust explosions; hazards, assessment, protective measures; test methods for the determination of the safety characteristic of dusts |
| DIN EN 13284-2:2016-04 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 2: QUALITY ASSURANCE OF AUTOMATED MEASURING SYSTEMS |
| DIN 17565:2004-02 | Ferro-Chromium, Ferro-Chromium-Silicon and Chromium - Technical delivery conditions |
US$159.32
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German - English
PDF - German - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.