VDI 3823 Blatt 4:2006-11
Current
The latest, up-to-date edition.
Vacuum coating quality assurance - Testing of vacuum coated plastics
Hardcopy , PDF
German - English
11-01-2006
Preliminary note
1 Scope
2 Testing plans
3 Testing procedures
Bibliography
In this guideline the methods of testing vacuum coated plastic parts that have become established practice for manufacturers and users will be presented.
DocumentType |
Standard
|
Pages |
22
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 3823 Blatt 3:2006-11 | Vacuum coating quality assurance - Production sequence and job steps |
VDI 3823 Blatt 2:2006-11 | Vacuum coating quality assurance - Demands on plastics to be coated |
VDI 3823 Blatt 1:2006-11 | Vacuum coating quality assurance - Characteristics, applications and procedures |
VDI 2840:2005-11 | Carbon films - Basic knowledge, coating types and properties |
DIN 50021:1988-06 | SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
DIN EN ISO 3231:1998-02 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
VDI 3823 Blatt 3:2006-11 | Vacuum coating quality assurance - Production sequence and job steps |
DIN 5033-1:2009-05 | COLORIMETRY - PART 1: BASIC TERMS OF COLORIMETRY |
MIL-STD-285 Base Document:1956 | ATTENUATION MEASUREMENTS FOR ENCLOSURES, ELECTROMAGNETIC SHIELDING, FOR ELECTRONIC TEST PURPOSES, METHOD OF |
ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
DIN ISO 9022-2:2015-06 | OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 2: COLD, HEAT AND HUMIDITY (ISO 9022-2:2015) |
EN ISO 15106-3:2005 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003) |
EN ISO 10993-5:2009 | Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) |
DIN 5033-4:1992-07 | COLORIMETRY; SPECTROPHOTOMETRIC METHOD |
ASTM D 2463 : 2015 : REDLINE | Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
ISO 9022-2:2015 | Optics and photonics Environmental test methods Part 2: Cold, heat and humidity |
DIN EN ISO 3497:2001-12 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
EN ISO 3543:2000/AC:2006 | Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003) |
ISO 9211-4:2012 | Optics and photonics Optical coatings Part 4: Specific test methods |
ISO 3543:2000 | Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
EN ISO 3497 : 2000 | METALLIC COATINGS - MEASUREMENTS OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
ISO 14676:1997 | Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method |
ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 14155-1:2003 | Clinical investigation of medical devices for human subjects Part 1: General requirements |
ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
DIN EN ISO 2360:2016-05 (Draft) | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
EN ISO 10993-4:2017 | Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) |
VDI 3823 Blatt 1:2006-11 | Vacuum coating quality assurance - Characteristics, applications and procedures |
DIN 5033-5:1981-01 | COLORIMETRY BY VISUAL MATCHING |
DIN 53754:1977-06 | TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD |
EN ISO 9220 : 1994 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - SCANNING ELECTRON MICROSCOPE METHOD |
EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
DIN 10050-9:1973-12 | TESTING OF BUTTER WRAPPERS; DETERMINATION OF TRANSMISSION |
DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
EN 1071-1 : 2003 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER |
DIN EN ISO 14155-1:2009-11 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - PART 1: GENERAL REQUIREMENTS |
ISO 15106-3:2003 | Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method |
DIN EN ISO 10993-5:2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
DIN 53380-1:2000-07 | Determining the gas transmission rate of plastic film by the volumetric method |
DIN 58196-6:1995-07 | OPTICAL COATINGS - PART 6: TESTING OF THE ADHESION WITH A TAPE (TAPE TEST) |
ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
DIN 52348:1985-02 | TESTING OF GLASS AND PLASTICS; ABRASION TEST; SAND TRICKLING METHOD |
DIN 5033-6:1976-08 | COLORIMETRY; TRISTIMULUS METHOD |
ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
DIN EN ISO 10993-4:2016-02 (Draft) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD (ISO 10993-4:2017) |
ASTM G 99 : 2017 : REDLINE | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
DIN 53380-3:1998-07 | Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings |
ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ASTM F 390 : 2011 : REDLINE | Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array |
VDI 3823 Blatt 2:2006-11 | Vacuum coating quality assurance - Demands on plastics to be coated |
DIN 53494:1984-05 | ELECTROPLATED COATINGS; TESTING OF ELECTROPLATED PLASTIC ARTICLES; DETERMINATION OF PEEL STRENGTH |
DIN EN ISO 10993-10:2014-10 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
DIN EN ISO 15106-3:2005-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 3: ELECTROLYTIC DETECTION SENSOR METHOD |
ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
DIN 50431:1988-05 | TESTING OF SEMICONDUCTOR MATERIALS; MEASUREMENT OF THE RESISTIVITY OF SILICON OR GERMANIUM SINGLE CRYSTALS BY MEANS OF THE FOUR PROBE DIRECT CURRENT METHOD WITH CO-LINEAR ARRAY |
DIN 50933:2015-08 | MEASUREMENT OF COATING THICKNESSES - MEASUREMENT OF THE THICKNESS OF COATINGS BY DIFFERENCE MEASUREMENT USING A STYLUS INSTRUMENT |
DIN 58196-5:1995-07 | OPTICAL COATINGS - PART 5: TESTING OF THE ABRASION RESISTANCE WITH CLOTH |
DIN 58196-1:1996-07 | OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
DIN 52347:1987-12 | TESTING OF GLASS AND PLASTICS; ABRASION TEST; METHOD USING ABRASION WHEELS AND MEASUREMENT OF SCATTERED LIGHT |
EN ISO 14155-1:2009 | Clinical investigation of medical devices for human subjects - Part 1: General requirements (ISO 14155-1:2003) |
ISO 10110-7:2017 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
EN ISO 10993-1:2009/AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009/COR 1:2010) |
DIN ISO 10110-7:2016-05 (Draft) | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES |
ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.