VDI 4499 Blatt 4:2015-03
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
03-01-2015
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basics
5 Aspects of ergonomic analyses
6 Application examples
Bibliography
This section deals with the applications of ergo-nomic human models and the objectives they pur-sue.
DocumentType |
Standard
|
Pages |
54
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 4499 Blatt 3:2016-04 (Draft) | Digital Factory - Data management and system architectures |
EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
EN ISO 7250-1:2017 | Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) |
ISO 11226:2000 | Ergonomics — Evaluation of static working postures |
DIN EN 1005-2:2009-05 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
DIN EN ISO 15536-1:2008-12 | ERGONOMICS - COMPUTER MANIKINS AND BODY TEMPLATES - PART 1: GENERAL REQUIREMENTS |
EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
ISO 11228-3:2007 | Ergonomics Manual handling Part 3: Handling of low loads at high frequency |
DIN EN 547-2:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
ISO 11228-2:2007 | Ergonomics — Manual handling — Part 2: Pushing and pulling |
VDI 2209:2009-03 | 3D product modelling - Technical and organizational requirements - Procedures, tools, and applications - Cost-effective practical use |
DIN 33411-1:1982-09 | Physical strenghts of man; concepts, interrelations, defining parameters |
DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
DIN 33402-1:2008-03 | ERGONOMICS - BODY DIMENSIONS OF PEOPLE - PART 1: TERMS AND DEFINITIONS, MEASURING PROCEDURES |
ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
DIN EN ISO 7250-1:2016-05 (Draft) | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 1: BODY MEASUREMENT DEFINITIONS AND LANDMARKS (ISO 7250-1:2017) |
DIN 33408-1:2008-03 | BODY TEMPLATES - PART 1: FOR SEATS OF ALL KINDS |
DIN 33411-5:1999-11 | Physical strength of man - Part 5: Maximal isometric action forces, values |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
EN ISO 12100-1:2003/A1:2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
EN ISO 15536-1:2008 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
ISO 7250-1:2017 | Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks |
EN 1005-5:2007 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
DIN EN 1005-5:2007-05 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
DIN EN 894-3:2010-01 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008) |
EN ISO 6385:2016 | ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016) |
DIN EN 1005-4:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
DIN EN 547-1:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 9241-2:1992 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
VDI 3633 Blatt 6:2001-10 | Simulation of systems in materials handling, logistics and production - Representation of human resources in simulation models |
DIN EN ISO 12100:2011-03 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
VDI 2242 Blatt 2:1986-04 | Engineering design of products in accordance with ergonomics; work aids and relevant literature |
ISO 15536-1:2005 | Ergonomics Computer manikins and body templates Part 1: General requirements |
ISO 11228-1:2003 | Ergonomics Manual handling Part 1: Lifting and carrying |
DIN EN 1005-3:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
NASA STD 3000 VOL 1 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 1 |
ISO 6385:2016 | Ergonomics principles in the design of work systems |
SAE J 826 : 2015 | DEVICES FOR USE IN DEFINING AND MEASURING VEHICLE SEATING ACCOMMODATION |
EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
VDI 4499 Blatt 1:2008-02 | Digital factory - Fundamentals |
DIN 33406:1988-07 | WORKPLACE DIMENSIONS IN PRODUCTION; TERMINOLOGY, TYPES AND DIMENSIONS OF WORKPLACES |
DIN EN ISO 14738:2009-07 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002 + Cor. 1:2003 + Cor. 2:2005) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.