ISO 580:2005
|
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
|
EN 681-4:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
|
ISO 2507-2:1995
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
|
ISO 13259:2010
|
Thermoplastics piping systems for underground non-pressure applications Test method for leaktightness of elastomeric sealing ring type joints
|
ISO 3451-1:2008
|
Plastics Determination of ash Part 1: General methods
|
ISO 13229:2010
|
Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
|
ISO 8773:2006
|
Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene (PP)
|
ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
|
EN 15345:2007
|
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
|
ISO 8772:2006
|
Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE)
|
ISO 1133-1:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
|
ISO 11173:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Staircase method
|
ISO 2507-1:1995
|
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
|
ISO 13265:2010
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage Joints for buried non-pressure applications Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
|
ISO 3127:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
|
EN 15346:2014
|
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
|
ISO 13968:2008
|
Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
|
ISO 161-1:1996
|
Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series
|
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
|
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions
|
ISO 13260:2010
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage Test method for resistance to combined temperature cycling and external loading
|
ISO 13262:2010
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics spirally-formed structured-wall pipes Determination of the tensile strength of a seam
|
ISO 22088-3:2006
|
Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method
|
ISO 1158:1998
|
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
ISO 9001:2015
|
Quality management systems — Requirements
|
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
|
ISO 4435:2003
|
Plastics piping systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U)
|
EN 15344:2007
|
Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
|
ISO 9967:2016
|
Thermoplastics pipes Determination of creep ratio
|
ISO 13254:2010
|
Thermoplastics piping systems for non-pressure applications Test method for watertightness
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
ISO 9969:2016
|
Thermoplastics pipes Determination of ring stiffness
|
EN 12099:1997
|
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
|
ISO 9852:2007
|
Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method
|
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
|
ISO 2505:2005
|
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|