ASTM A 1059/A1059M : 2018
Current
The latest, up-to-date edition.
Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
Hardcopy , PDF
English
01-11-2018
This specification covers the general requirements for protective zinc coatings (hereinafter referred to as the coatings) to be applied by the thermo-diffusion coating (TDC) method, to various products made of carbon steel, including low and high tensile parts as well as of wrought iron, iron and steel castings, sintered iron steel-powder, and various steel and stainless alloys.
1.1This specification covers the general requirements for protective zinc coatings (hereinafter referred to as the coatings) to be applied by the thermo-diffusion coating (TDC) method, to various products made of carbon steel, including low and high tensile parts as well as of wrought iron, iron and steel castings, sintered iron steel-powder, and various steel and stainless alloys. TDC is a dry coating process carried out by immersing the parts in a zinc or zinc alloy powder at elevated temperature for a period of time, causing a metallurgical diffusion process of zinc and iron. Further processing may be added, such as passivation, topcoat application, paint application, etc.
1.2This specification is applicable to orders in either inch-pound units (as A1059) or in SI units (as A1059M). Inch-pound units and SI units are not necessarily exact equivalents. Within the text of this specification and where appropriate, SI units are shown in brackets. Each system shall be used independently of the other without combining values in any way. In the case of orders in SI units, all testing and inspection shall be done using the metric equivalent of the test or inspection method as appropriate. In the case of orders in inch-pound units, such shall be stated to the applicator when the order is placed.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
A 05
|
DocumentType |
Standard
|
Pages |
6
|
ProductNote |
This standard is also refers to ASTM F2329/F2329M
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM F 1789 : 2014 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2016 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2017 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2008 | Standard Terminology for F16 Mechanical Fasteners |
ASTM D 6386 : 2022 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
ASTM F 1789 : 2006 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 90/A90M : 2021 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
ASTM F 1789 : 2001 : REV A | Standard Terminology of F16 Mechanical Fasteners |
ASTM F 1789 : 2017 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2012 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2001 : REV B | Standard Terminology of F16 Mechanical Fasteners |
ASTM A 90/A90M : 2013 : R2018 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
ASTM F 1789 : 2005 : REV C | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2022 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2003 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2008 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2006 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 385/A385M : 2020 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
ASTM F 1789 : 2014 | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 902 : 2023 : REV A | Standard Terminology Relating to Metallic Coated Steel Products |
ASTM F 1789 : 2002 : REV A | Standard Terminology of F16 Mechanical Fasteners |
ASTM F 1789 : 2009 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 902 : 2023 | Standard Terminology Relating to Metallic Coated Steel Products |
ASTM F 1789 : 2006 : REV C | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2004 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM D 6386 : 2016 : REV A | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
ASTM F 1789 : 2007 : REV C | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2007 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM D 6386 : 2016 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
ASTM D 6386 : 1999 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
ASTM F 1789 : 2008 : REV C | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2015 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2002 : REV B | Standard Terminology of F16 Mechanical Fasteners |
ASTM F 1789 : 2010 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2012 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 2329/F2329M : 2015 : R2023 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
ASTM F 1789 : 2005 : REV D | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2017 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2010 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2010 : REV A : EDT 1 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2015 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2000 : REV A | Standard Terminology of F16 Mechanical Fasteners |
ASTM F 1789 : 2007 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2011 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM D 6386 : 2010 | Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting |
ASTM F 1789 : 2004 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2005 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2008 : REV D | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2007 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2008 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 1789 : 2011 : REV A | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 902 : 2018 : REV A | Standard Terminology Relating to Metallic Coated Steel Products |
ASTM F 1789 : 2005 : REV B | Standard Terminology for F16 Mechanical Fasteners |
ASTM A 385/A385M : 2022 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
ASTM F 1789 : 2023 | Standard Terminology for F16 Mechanical Fasteners |
ASTM F 2329/F2329M : 2015 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
ASTM F 1789 : 2002 | Standard Terminology of F16 Mechanical Fasteners |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.