ASTM D 5359 : 1998 : R2021
|
Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
|
ASTM C 1256 : 1993 : R2019
|
Standard Practice for Interpreting Glass Fracture Surface Features
|
ASTM E 2190 : 2019
|
Standard Specification for Insulating Glass Unit Performance and Evaluation
|
ASTM E 2927 : 2016 : EDT 1
|
Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
|
ASTM F 3007 : 2019
|
Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
|
ASTM C 1426 : 2014 : R2020
|
Standard Practices for Verification and Calibration of Polarimeters
|
ASTM C 1401 : 2023
|
Standard Guide for Structural Sealant Glazing
|
ASTM C 1901 : 2021 : EDT 2
|
Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
|
ASTM E 2269 : 2021
|
Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
|
ASTM E 982 : 1994 : R2021
|
Standard Specification for Laboratory Glass Test Tubes
|
ASTM C 1651 : 2011 : R2018
|
Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
|
ASTM C 1322 : 2015 : R2019
|
Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
|
ASTM C 1172 : 2019
|
Standard Specification for Laminated Architectural Flat Glass
|
ASTM E 2649 : 2020
|
Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
|
ASTM C 1652/C1652M : 2021
|
Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
|
ASTM F 3006 : 2020
|
Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
|
ASTM E 772 : 2015 : R2021
|
Standard Terminology of Solar Energy Conversion
|
ASTM C 1376 : 2021 : REV A
|
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
|
ASTM F 2179 : 2020
|
Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
|
ASTM C 1464 : 2021
|
Standard Specification for Bent Glass
|
ASTM C 1048 : 2018
|
Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
|
ASTM C 1349 : 2017
|
Standard Specification for Architectural Flat Glass Clad Polycarbonate
|
ASTM E 2189 : 2019
|
Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
|
ASTM E 2431 : 2012 : R2020
|
Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
|
ASTM E 2875/E2875M : 2012 : R2021
|
Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
|
ASTM E 3120 : 2019
|
Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
|
ASTM E 2461 : 2022
|
Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
|
ASTM C 1720 : 2021
|
Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
|
ASTM C 1503 : 2018
|
Standard Specification for Silvered Flat Glass Mirror
|
ASTM E 1732 : 2022
|
Standard Terminology Relating to Forensic Science
|
ASTM C 1279 : 2023
|
Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
|
ASTM D 883 : 2023
|
Standard Terminology Relating to Plastics
|
ASTM C 1663 : 2018
|
Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
|
ASTM C 965 : 2023
|
Standard Practice for Measuring Viscosity of Glass Above the Softening Point
|
ASTM C 978 : 2004 : R2019
|
Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
|
ASTM C 148 : 2017 : R2022
|
Standard Test Methods for Polariscopic Examination of Glass Containers
|
ASTM C 1203 : 2004 : R2019
|
Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
|
ASTM C 1036 : 2021
|
Standard Specification for Flat Glass
|
ASTM E 2188 : 2019
|
Standard Test Method for Insulating Glass Unit Performance
|
ASTM C 1422/C1422M : 2020 : REV A
|
Standard Specification for Chemically Strengthened Flat Glass
|
ASTM F 2813 : 2018 : R2023
|
Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
|
ASTM E 1157 : 1987 : R2018 : EDT 1
|
Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
|
ASTM C 1908 : 2021
|
Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass
|
ASTM F 218 : 2013 : R2020
|
Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
|
ASTM E 708 : 1979 : R2017
|
Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
|
ASTM C 829 : 1981 : R2022
|
Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
|
ASTM D 542 : 2022
|
Standard Test Method for Index of Refraction of Transparent Organic Plastics
|
ASTM C 1285 : 2021
|
Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
|
ASTM C 1662 : 2018
|
Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
|