Standard Practice for Sampling Asphalt Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-12-2023

Publisher

American Society for Testing and Materials

1.1This practice applies to the sampling of asphalt materials at points of manufacture, storage, or delivery.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 04
DocumentType	Standard Practice
Pages	6
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 140/D140M : 2016

ASTM D 6114/D6114M : 2019 : R2023	Standard Specification for Asphalt-Rubber Binder
ASTM D 4989/D4989M : 1990 : REV A : R2021	Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D 8188 : 2023	Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
ASTM D 3141/D3141M : 2021	Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
ASTM D 6373 : 2023	Standard Specification for Performance-Graded Asphalt Binder
ASTM D 2027/D2027M : 2019	Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D 449/D449M : 2003 : R2021	Standard Specification for Asphalt Used in Dampproofing and Waterproofing
ASTM D 2746/D2746M : 2018 : R2023	Standard Test Method for Staining Tendency of Asphalt (Stain Index)
ASTM D 4125/D4125M : 2021	Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method
ASTM D 2521/D2521M : 1976 : R2021	Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
ASTM D 244 : 2023	Standard Test Methods and Practices for Emulsified Asphalts
ASTM D 6152/D6152M : 2012 : R2018	Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
ASTM D 5013 : 2018	Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
ASTM D 6511/D6511M : 2018	Standard Test Methods for Solvent Bearing Bituminous Compounds
ASTM D 3143/D3143M : 2019	Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D 3289 : 2017 : R2022	Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
ASTM D 5643/D5643M : 2006 : R2018	Standard Specification for Coal Tar Roof Cement, Asbestos Free
ASTM D 5710/D5710M : 2022	Standard Specification for Trinidad Lake Modified Asphalt
ASTM D 36/D36M : 2014 : R2020	Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D 450/D450M : 2007 : R2018	Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
ASTM D 8051/D8051M : 2016 : R2023	Standard Specification for Wax-Modified Asphalt Used in Roofing
ASTM D 8125 : 2018 : R2023	Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
ASTM D 6626 : 2015 : R2021	Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder
ASTM D 7654/D7654M : 2010 : R2018	Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D 8239 : 2023	Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D 3791/D3791M : 2011 : R2018	Standard Practice for Evaluating the Effects of Heat on Asphalts
ASTM D 2028/D2028M : 2015 : R2021 : EDT 1	Standard Specification for Cutback Asphalt (Rapid-Curing Type)
ASTM D 8237 : 2021	Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
ASTM D 6932/D6932M : 2021	Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures
ASTM D 312/D312M : 2016 : REV A : R2023	Standard Specification for Asphalt Used in Roofing
ASTM E 102/E102M : 1993 : R2021	Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM D 5505 : 2014 : R2020	Standard Practice for Classifying Emulsified Recycling Agents
ASTM D 3320/D3320M : 2018	Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D 4552/D4552M : 2020	Standard Classification for Hot-Mix Recycling Agents
ASTM D 6154 : 2015 : R2021 : EDT 1	Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
ASTM D 70/D70M : 2021	Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
ASTM D 2397/D2397M : 2020	Standard Specification for Cationic Emulsified Asphalt
ASTM D 3381/D3381M : 2018	Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction
ASTM D 8099/D8099M : 2017 : R2023	Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
ASTM D 4215 : 2021	Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures
ASTM D 7226 : 2013 : R2023	Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D 946/D946M : 2020	Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
ASTM D 43/D43M : 2000 : R2018	Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
ASTM D 2026/D2026M : 2015 : R2021 : EDT 1	Standard Specification for Cutback Asphalt (Slow-Curing Type)
ASTM D 7379/D7379M : 2008 : R2021	Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM D 977 : 2020	Standard Specification for Emulsified Asphalt
ASTM D 6608 : 2020	Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
ASTM D 6945/D6945M : 2003 : R2023	Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
ASTM D 6307 : 2019	Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
ASTM D 5727/D5727M : 2000 : R2023	Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)