ASTM D 3517 : 2014

Name: ASTM D 3517 : 2014
Brand: ASTM
Price: 135.86 AUD

Superseded

View Superseded by

Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

Available format(s)

Hardcopy , PDF

Superseded date

16-09-2019

Language(s)

English

Published date

01-03-2014

Publisher

American Society for Testing and Materials

1.1This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in water conveyance systems which operate at internal gage pressures of 450 psi (3103 kPa) or less. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP) are fiberglass pipes. The standard is suited primarily for pipes to be installed in buried applications, although it may be used to the extent applicable for other installations such as, but not limited to, jacking, tunnel lining and slip-lining rehabilitation of existing pipelines.

Note 1—For the purposes of this standard, polymer does not include natural polymers.

1.2The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

Note 2—There is no known ISO equivalent to this standard.

1.3The following safety hazards caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 20
DocumentType	Standard
Pages	13
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 3517 : 2019
Supersedes	ASTM D 3517 : 2011

ASTM D 1599 : 2018	Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D 5421 : 2015	Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

ASTM D 1600 : 1999	Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 4161 : 1996	Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 4161 : 2001 : R2005	Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 2290 : 2016	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 4161 : 2001	Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 2584 : 2002	Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 2412 : 2011	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 2412 : 2002 : R2008	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 2992 : 2001	Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D 2584 : 2008	Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 3892 : 1993 : R2003	Standard Practice for Packaging/Packing of Plastics
ASTM D 2584 : 1994	Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 3567 : 1997 : R2006	Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 3892 : 1993 : R1998	Standard Practice for Packaging/Packing of Plastics
ASTM D 2412 : 2010 : REV A	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 1600 : 2007	Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 1600 : 2013	Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 2290 : 2004	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 1600 : 2014	Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 2584 : 2011	Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 1600 : 2008	Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 2412 : 1996 : REV A	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 4161 : 2014	Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 2412 : 2002	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 3567 : 1997 : R2002	Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 2290 : 2000	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 2584 : 1968	Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
ASTM D 1600 : 2018	Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
ASTM D 2992 : 2006	Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D 3567 : 1997	Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 2584 : 2018	Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 2290 : 2000 : EDT 1	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 2290 : 2019	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 2992 : 1996 : EDT 1	Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D 3892 : 1993 : R2009	Standard Practice for Packaging/Packing of Plastics
ASTM D 4161 : 2014 : R2019	Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 2290 : 2012	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 4161 : 2001 : R2010	Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D 3567 : 2017	Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 2992 : 2012	Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D 2412 : 2011 : R2018	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D 2290 : 2008	Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 3567 : 1997 : R2011	Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
ASTM D 2412 : 2010	Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading