ASTM D 665 : 2014-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER
28-01-2020
01-11-2014
CONTAINED IN VOL. 05.01, 2015 Defines the evaluation of the ability of inhibited mineral oils, particularly steam-turbine oils, to aid in preventing the rusting of ferrous parts should water become mixed with the oil.
Committee |
D 02
|
DevelopmentNote |
Supersedes CGSB 61.4 (07/2004)
|
DocumentType |
Redline
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
MIL-PRF-17331 Revision K:2013 | LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
MIL-DTL-17111 Revision E:2012 | FLUID, POWER TRANSMISSION |
DOD L 24574 : (1) | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
DEFSTAN 91-71/2(2001) : 2001 | LUBRICATING OIL, GEAR SYNTHETIC JOINT SERVICE DESIGNATION: OX-165 |
DEFSTAN 91-59/1(1991) : 1991 | LUBRICATING OIL, EXTREME PRESSURE GRADE 75W - NATO CODE 0-186 - JOINT SERVICE DESIGNATION OEP-38 - LUBRICATING OIL, EXTREME PRESSURE GRADE 80W/90 - NATO CODE 0-226 |
MIL L 24467 : 0 | LUBRICATING OIL, STEAM TURBINE, VAPOR-SPACE INHIBITED |
ASTM D 5969 : 2011 : EDT 1 | Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
API MPM CH10.3 REDLINE : 2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10: SEDIMENT AND WATER - SECTION 3: STANDARD TEST METHOD FOR WATER AND SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE) |
EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 5969 : 2011 | Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
ASTM D 4007 : 2011 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
ASTM D 8029 : 2017-08 | SPECIFICATION FOR BIODEGRADABLE, LOW AQUATIC TOXICITY HYDRAULIC FLUIDS |
DEFSTAN 91-035/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: EMULSIFYING, ANTI-WEAR JOINT SERVICE DESIGNATION: OX-30 |
DEFSTAN 91-039/4(2018) : 2018 | HYDRAULIC FLUID, PETROLEUM: ANTI-WEAR NATO CODE NO: H-576 JOINT SERVICE DESIGNATION: OM-33 |
ASTM D 7577 : 2012 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
API MPM CH10.2 : 2016 | Determination of Water in Crude Oil by Distillation |
MS 1007 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION |
ISO 4113:2010 | Road vehicles Calibration fluids for diesel injection equipment |
ASTM D 3603 : 2015-02 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
MIL-H-46001 Revision D:1989 | HYDRAULIC FLUID, PETROLEUM BASE, FOR MACHINE TOOLS |
MIL-DTL-32353 Revision A:2012 | HYDRAULIC & LUBRICATING OIL, SYNTHETIC HYDROCARBON BASE |
SAE MS 1004 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
BS ISO 13628-6:2000 | Petroleum and natural gas industries. Design and operation of subsea production systems Design and operation of subsea controls |
BS ISO 4113:2010 | Road vehicles. Calibration fluids for diesel injection equipment |
I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
ASTM D 7973 : 2014 | Standard Guide for Monitoring Failure Mode Progression in Plain Bearings |
MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
MIL-PRF-32073 Revision A:2007 | HYDRAULIC FLUID, BIOBASED |
04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
ASTM D 4007 : 2011 : R2016 : EDT 1 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
DEFSTAN 91-71/1(1989) : 1989 | LUBRICATING FLUID, GEAR, SYNTHETIC JOINT SERVICE DESIGNATION: OX-165 |
SAE J 313 : 2017 | DIESEL FUELS |
ASTM D 5534 : 1994 : R2005 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
SAE MS 1003-2 : 2004 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
SAE MS 1005 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 7577 : 2012 : R2016 | Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends |
ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
ASTM D 7752 : 2018 : REDLINE | Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids |
MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
MIL F 17111 : B | FLUID, POWER TRANSMISSION |
PD ISO/TR 18792:2008 | Lubrication of industrial gear drives |
SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
MIL-PRF-17672 Revision E:2010 | Hydraulic Fluid, Petroleum, Inhibited |
SAE MS 1006 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
ASTM D 6158 : 2016-02 | SPECIFICATION FOR MINERAL HYDRAULIC OILS |
API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
SAE MS 1003 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
ASTM D 5969 : 2011 : R2016 | Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments |
API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
ASTM D 4007 : 2011 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
ASTM G 205 : 2016 : REDLINE | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
ASTM D 5534 : 1994 : R2011 : EDT 1 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
NACE TM 01 72 : 2015 | DETERMINING CORROSIVE PROPERTIES OF INSOLUBLE PETROLEUM PRODUCT PIPELINE CARGOES |
12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
SAE J 1696 : 2017 | STANDARD FUEL FILTER TEST FLUID |
11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
SAE MS 1002 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
08/30178041 DC : DRAFT FEB 2008 | BS ISO 4113 - ROAD VEHICLES - CALIBRATION FLUIDS FOR DIESEL INJECTION EQUIPMENT |
DOD L 24651 : 0 | LUBRICATING OIL, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC) |
SAE MS 1009 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
SAE MS 1001 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
ASTM D 4304 : 2017 : REDLINE | Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
ASTM D 4007 : 2011 : R2016 | Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
ASTM D 5534 : 1994 : R1999 | Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
SAE J 311 : 2000 | FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS |
BS 871:1981 | Specification for abrasive papers and cloths |
ASTM D 3603 : 2015-02 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF STEAM TURBINE OIL IN THE PRESENCE OF WATER (HORIZONTAL DISK METHOD) |
ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
SAE J 405 : 1998 | CHEMICAL COMPOSITIONS OF SAE WROUGHT STAINLESS STEELS |
ASTM D 91 : 2002 : R2007 | Standard Test Method for Precipitation Number of Lubricating Oils |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.