ASTM E 459 : 2005 : R2016

Name: ASTM E 459 : 2005 : R2016
Brand: ASTM
Price: 125.58 AUD

Superseded

View Superseded by

Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter

Available format(s)

Hardcopy , PDF

Superseded date

25-08-2023

Language(s)

English

Published date

06-04-2016

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 15.03, 2016 Defines the design and use of a thin metallic calorimeter for measuring heat transfer rate (also called heat flux).

1.1This test method covers the design and use of a thin metallic calorimeter for measuring heat transfer rate (also called heat flux). Thermocouples are attached to the unexposed surface of the calorimeter. A one-dimensional heat flow analysis is used for calculating the heat transfer rate from the temperature measurements. Applications include aerodynamic heating, laser and radiation power measurements, and fire safety testing.

1.2Advantages:

1.2.1Simplicity of Construction—The calorimeter may be constructed from a number of materials. The size and shape can often be made to match the actual application. Thermocouples may be attached to the metal by spot, electron beam, or laser welding.

1.2.2Heat transfer rate distributions may be obtained if metals with low thermal conductivity, such as some stainless steels, are used.

1.2.3The calorimeters can be fabricated with smooth surfaces, without insulators or plugs and the attendant temperature discontinuities, to provide more realistic flow conditions for aerodynamic heating measurements.

1.2.4The calorimeters described in this test method are relatively inexpensive. If necessary, they may be operated to burn-out to obtain heat transfer information.

1.3Limitations:

1.3.1At higher heat flux levels, short test times are necessary to ensure calorimeter survival.

1.3.2For applications in wind tunnels or arc-jet facilities, the calorimeter must be operated at pressures and temperatures such that the thin-skin does not distort under pressure loads. Distortion of the surface will introduce measurement errors.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4.1Exception—The values given in parentheses are for information only.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	E 21
DocumentType	Test Method
Pages	7
ProductNote	Reconfirmed 2016
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM E 459 : 2022
Supersedes	ASTM E 459 : 2005 : R2011

ASTM E 422 : 2022	Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
ASTM E 1529 : 2022	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 637 : 2005 : R2016	Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
ASTM E 3057 : 2019	Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
ASTM E 457 : 2008 : R2020	Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E 458 : 2008 : R2020	Standard Test Method for Heat of Ablation