BS 6338:1982
Current
Current
The latest, up-to-date edition.
Specification for chromate conversion coatings on electroplated zinc and cadmium coatings
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-12-1982
Publisher
Cooperating organizations
National foreword
0 Introduction
1 Scope and field of application
2 References
3 Method of application of chromate conversion coatings
4 Classification
5 Requirements
Publications referred to
Covers the method of application, classification (into two classes and four types) and requirements (general, adhesion of coloured coatings and corrosion resistance).
This International Standard specifies requirements relating to chromate conversion coatings on zinc and cadmium intended to give protection against corrosion. Finishes for giving particular colours only or specifically to improve paint adhesion are not covered by this International Standard.
| Committee |
STI/33
|
| DevelopmentNote |
Also numbered as ISO 4520 Supersedes 77/50321 DC (09/2005)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| BS 5516-1:2004 | Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
| BS 7371-3:1993 | Coatings on metal fasteners Specification for electroplated zinc and cadmium coatings |
| 09/30203673 DC : 0 | BS 7371-7 - COATINGS ON METAL FASTENERS - PART 7: SPECIFICATION FOR MECHANICALLY APPLIED ZINC AND ZINC BASED COATINGS |
| DEFSTAN 21-5/4(2016) : 2016 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| BS 4873:2004 | Aluminium alloy windows |
| DEFSTAN 03-29/4(2008) : 2008 | PROTECTION OF METALLIC SPRINGS AGAINST CORROSION |
| DEFSTAN 03-29/3(2002) : 2002 | PROTECTION OF METALLIC SPRINGS AGAINST CORROSION |
| DEFSTAN 03-2/6(2011) : 2011 | CLEANING AND PREPARATION OF METAL SURFACES |
| BS 7371-7:2010 | Coatings on metal fasteners Specification for mechanically applied zinc and zinc based coatings |
| DEFSTAN 03-32(PT4)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 03-32(PT6)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 03-20/3(2005) : 2005 | ELECTRO-DEPOSITION OF ZINC |
| DEFSTAN 03-28(PT2)/4(2008) : 2008 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 2: PHYSICAL VAPOUR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| DEFSTAN 03-28(PT2)/3(2005) : 2005 | PHYSICAL VAPOUR DEPOSITION OF METALS - PART 2: PHYSICAL VAPOUR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| DEFSTAN 03-2/4(2005) : 2005 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 03-2/5(2009) : 2009 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 03-032(PT6)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 03-32(PT6)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS |
| DEFSTAN 21-5/2(2004) : 2004 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 21-5/3(2009) : 2009 | CODE OF PRACTICE FOR PROTECTIVE FINISHES |
| BS 7371-7:1994 | Coatings on metal fasteners Specification for mechanically applied zinc coatings |
| SAE AMS 03-040 : 2017 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| BS 8213-4:1990 | Windows, doors and rooflights Code of practice for the installation of replacement windows and doorsets in dwellings |
| BS 4479-1:1990 | Design of articles that are to be coated General recommendations |
| DEFSTAN 03-39/1(2008) : 2008 | ELECTRODEPOSITION OF ZINC-COBALT ALLOYS |
| BS 2482:1981 | Specification for timber scaffold boards |
| BS EN 22339:1992 | Taper pins, unhardened |
| DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| BS 6510:2010 | Steel-framed windows and glazed doors. Specification |
| BS 2482:2009 | Specification for timber scaffold boards |
| BS 6510:2005 | Steel-framed windows and glazed doors |
| BS 7371-3:2009 | Coatings on metal fasteners Specifications for electroplated zinc coatings |
| BS 7496-3:1991 | Cross-recessed tapping screws Specification for raised countersunk head screws |
| BS 4479-3:1990 | Design of articles that are to be coated Recommendations for conversion coatings |
| BS 1706:1990 | Method for specifying electroplated coatings of zinc and cadmium on iron and steel |
| SAE AMS 03-19A : 2017 | ELECTRO-DEPOSITION OF CADMIUM |
| DEFSTAN 03-19/4(2010) : 2010 | ELECTRO-DEPOSITION OF CADMIUM |
| DEFSTAN 03-19/3(2005) : 2005 | ELECTRO-DEPOSITION OF CADMIUM |
| SAE AMS 03-20A : 2017 | ELECTRO-DEPOSITION OF ZINC |
| BS 7496-1:1991 | Cross-recessed tapping screws Specification for pan head screws |
| SAE AMS 03-2 : 2017 | CLEANING AND PREPARATION OF METAL SURFACES |
| 04/30100932 DC : DRAFT AUG 2004 | BS 6510 - STEEL-FRAMED WINDOWS AND GLAZED DOORS |
| BS 7496-2:1991 | Cross-recessed tapping screws Specification for countersunk flat head screws |
| BS A 401-420:2015 | Specification for screws, pan and 100° countersunk head, hexalobular drive recess (unified threads below ¼ inch) in various materials |
| BS EN 22341:1992 | Clevis pins with head |
| BS EN 28738:1992 | Plain washers for clevis pins. Product grade A |
| EN 22340 : 1992 | CLEVIS PINS WITHOUT HEAD (ISO 2340:1986) |
| EN 28737 : 1992 | TAPER PINS WITH EXTERNAL THREAD, UNHARDENED (ISO 8737:1986) |
| EN 28738 : 1992 | PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A (ISO 8738:1986) |
| EN 22341 : 1992 | CLEVIS PINS WITH HEAD (ISO 2341:1986) |
| EN 22339 : 1992 | TAPER PINS, UNHARDENED (ISO 2339:1986) |
| 08/30113948 DC : 0 | BS 2482 - SPECIFICATION FOR TIMBER SCAFFOLD BOARDS |
| DEFSTAN 03-40/1(2008) : 2008 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| DEFSTAN 03-41/1(2008) : 2008 | TRIVALENT CHROMIUM PASSIVATION TREATMENTS FOR ELECTRODEPOSITED ZINC-BASE COATINGS |
| 08/30133820 DC : DRAFT SEP 2008 | BS 7371-3 - COATINGS ON METAL FASTENERS - PART 3: SPECIFICATIONS FOR ELECTROPLATED ZINC COATINGS |
| BS 644:2003 | Timber windows. Factory assembled windows of various types. Specification |
| BS EN 22340:1992 | Clevis pins without head |
| BS EN 28737:1992 | Taper pins with external thread, unhardened |
| BS EN 28736:1992 | Taper pins with internal thread, unhardened |
| BS EN 286-4:1995 | Simple unfired pressure vessels designed to contain air or nitrogen Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS 5411-14(1982) : 1982 AMD 8497 | METHODS OF TEST FOR METALLIC AND RELATED COATINGS - GRAVIMETRIC METHOD FOR DETERMINATION OF COATING MASS PER UNIT AREA CONVERSION COATINGS ON METALLIC MATERIALS |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ISO 3892:2000 | Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods |
| BS 1706:1960 | Specification for electroplated coatings of cadmium and zinc on iron and steel |
| BS 5411-13(1982) : 1982 AMD 8491 | METHODS OF TEST FOR METALLIC AND RELATED COATINGS - CHROMATE CONVERSION COATINGS ON ZINC AND CADMIUM |
| BS 5466-1:1977 | Methods for corrosion testing of metallic coatings Neutral salt spray test (NSS test) |
| ISO 3768:1976 | Metallic coatings — Neutral salt spray test (NSS test) |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
$247.06
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.