DD CEN/TS 15398:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Resilient, textile and laminate floor coverings. Floor covering standard symbols
Hardcopy , PDF
29-02-2016
English
31-07-2006
Foreword
Introduction
1 Scope
2 Descriptions and definitions of symbols
Bibliography
Describes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols: - resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats; - textile floor coverings, excluding loose-laid mats; - laminate floor coverings; - floor panels for loose laying.
Committee |
PRI/60
|
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
British Standards Institution
|
RevisionOf | |
Status |
Superseded
|
SupersededBy |
EN 423:2001 | Resilient floor coverings - Determination of resistance to staining |
EN 426:1993 | Resilient floor coverings - Determination of width, length, straightness and flatness of sheet material |
EN 717-2:1994/AC:2002 | WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD |
EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
EN 14215:2013 | Textile floor coverings - Classification of machine-made pile rugs and runners |
EN 1815:1997 | Resilient and textile floor coverings - Assessment of static electrical propensity |
EN 13297:2007/AC:2008 | TEXTILE FLOOR COVERINGS - CLASSIFICATION OF NEEDLED PILE FLOOR COVERINGS |
EN 985:2001 | Textile floor coverings - Castor chair test |
EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
EN 994:2012 | Textile floor coverings - Determination of the side length, squareness and straightness of tiles |
EN 433:1994 | Resilient floor coverings - Determination of residual indentation after static loading |
ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
EN 425:2002 | Resilient and laminate floor coverings - Castor chair test |
ISO 8543:1998 | Textile floor coverings Methods for determination of mass |
ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
EN 435:1994 | Resilient floor coverings - Determination of flexibility |
EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
ISO 2076:2013 | Textiles Man-made fibres Generic names |
EN 13553:2017 | Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification |
EN 13745 : 2004 | SURFACES FOR SPORTS AREAS - DETERMINATION OF SPECULAR REFLECTANCE |
EN 15114:2006+A1:2008 | Textile floor coverings - Classification of textile floor coverings without pile |
EN 424:2001 | Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg |
EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
EN 669:1997 | Resilient floor coverings - Determination of dimensional stability of linoleum tiles caused by changes in atmospheric humidity |
ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
EN 1470:2008 | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
EN 1399:1997/AC:1998 | RESILIENT FLOOR COVERINGS - DETERMINATION OF RESISTANCE TO STUBBED AND BURNING CIGARETTES |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN 986:2005 | Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane |
ISO 24334:2014 | Laminate floor coverings Determination of locking strength for mechanically assembled panels |
EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
EN 660-2:1999/A1:2003 | RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 2: FRICK-TABER TEST |
EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
EN 430:1994 | Resilient floor coverings - Determination of mass per unit area |
ISO 24341:2006 | Resilient and textile floor coverings Determination of length, width and straightness of sheet |
EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
EN 660-1:1999/A1:2003 | RESILIENT FLOOR COVERINGS - DETERMINATION OF WEAR RESISTANCE - PART 1: STUTTGART TEST |
EN 429:1993 | Resilient floor coverings - Determination of the thickness of layers |
EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
EN 428:1993 | Resilient floor coverings - Determination of overall thickness |
EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
EN 1814:2005 | Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test |
EN 427:1994 | Resilient floor coverings - Determination of the side length, squareness and straightness of tiles |
EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
EN 685:2007 | Resilient, textile and laminate floor coverings - Classification |
EN ISO 11925-2:2010/AC:2011 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
ISO 1765:1986 | Machine-made textile floor coverings — Determination of thickness |
EN 1963:2007 | Textile floor coverings - Tests using the Lisson Tretrad Machine |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.