DIN 57606-1 : 1984
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONNECTING MATERIAL UP TO 660 V; INSTALLATION BOXES FOR ACCOMMODATION OF EQUIPMENT AND/OR CONNECTING TERMINALS
01-10-2000
12-01-2013
1 Anwendungsbereich
2 Begriffe
3 Anforderungen
3.1 Allgemeine Anforderungen
3.2 Schutz gegen direktes Berühren
3.3 Schutzarten
3.4 Aufschriften
3.5 Grösse von Verbindungsdosen
3.6 Anforderungen nach Art der Installations-technik
entsprechend Tabelle 1
3.7 Anforderungen nach Art der Installationsdosen
entsprechend Tabelle 1
4 Prüfungen
4.1 Allgemeines über Prüfungen
4.2 Prüfung der Isolierteile auf Wärmesicherheit
4.3 Prüfung der Isolierteile auf Wärmebeständigkeit
4.4 Prüfung der Isolierteile auf Feuerbeständigkeit
4.5 Prüfung des Rostschutzes
4.6 Prüfung der Isolierung
4.7 Prüfung des Schutzes gegen direktes Berühren
4.8 Prüfung der Schutzart
4.9 Prüfung der Aufschriften
4.10 Prüfung von Klemmstellen von Schraubklemmen
4.11 Prüfung der mechanischen Sicherheit gegen
Lage- und Formveränderung
4.12 Prüfung der mechanischen Haltbarkeit von
Installationsdosen und Deckeln
4.13 Prüfung der Befestigung von Deckeln
4.14 Prüfung der Befestigung von Geräten
4.15 Prüfung von Betonbaudosen
4.16 Prüfung der Grösse des Verbindungsteiles bei
Geräte-Verbindungsdosen
4.17 Prüfung der Zugentlastung an Hohlwand-dosen und
Installationskanaldosen
4.18 Prüfung der Zugentlastung an Geräteanschlussdosen
4.19 Prüfung der Zugentlastung an Verbindungs-muffen
Zitierte Normen und andere Unterlagen
Weitere Normen und andere Unterlagen
Frühere Ausgaben
Änderungen
Erläuterungen
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| VDE 0606-1 : 2014 | Corresponds |
| VDE 0606-2 : 84 DRAFT AMD 2 | CONNECTING MATERIAL UP TO 660 V - CONNECTING TERMINALS UP TO 70 MM SQUARED FOR CONNECTION IN BOXES |
| DIN 49073-2 : 1958 | INSTALLATION MATERIAL; FLUSH BOXES FOR SPREAD FASTENING OF THE INSET MAIN DIMENSION |
| VDE 0304-1 : 1959 | TESTING OF SOLID INSULATING MATERIALS FOR ASSESSMENT OF THEIR THERMAL STABILITY - DETERMINATION OF THERMAL PROPERTIES OF SOLID INSULATING MATERIALS |
| DIN 40052:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF SOLID FOREIGN BODIES, DUST CHAMBER |
| VDE 0603 : DRAFT AMD 1 89 | SMALL DISTRIBUTION BOARDS AND METER PANELS UP TO 250 V TO EARTH |
| VDE 0100-523 : 1981 | ERECTION OF POWER INSTALLATIONS WITH NOMINAL VOLTAGES UP TO 1000 V - DIMENSIONING OF CABLES AND CORDS; MECHANICAL STRENGTH, VOLTAGE DROP AND CURRENT-CARRYING CAPACITY |
| VDE 0250-204 : 2000 | |
| DIN 40011:1989-08 | ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT |
| VDE 0606-1 : 2014 | DOSEN UND GEHAEUSE FUER INSTALLATIONSGERAETE FUER HAUSHALT UND AEHNLICHE ORTSFESTE ELEKTRISCHE INSTALLATIONEN - TEIL 1: ALLGEMEINE ANFORDERUNGEN (IEC 60670-1:2002 + CORRIGENDUM 2003 + A1:2011) |
| DIN 46206-1:1985-06 | TERMINALS FOR ELECTRICAL EQUIPMENT; FLAT BLADE TERMINALS FOR THE CONNECTION OF ROUND COPPER CONDUCTORS UP TO 70 MM[2] |
| DIN 57107 : 1981 AMD 1 1982 | ERRICHTEN UND PRFEN VON ELEKTRISCHEN ANLAGEN IN MEDIZINISCH GENUTZTEN RAEUMEN |
| DIN 46285:1972-11 | ONE TO THREE-POLE SOCKET TERMINAL STRIPS (LIGHTING FIXTURE TERMINALS) 380 V A.C. AND 440 V D.C. FOR CONDUCTORS UP TO 2.5 MM[2] |
| DIN 46207:1971-06 | CONNECTIONS FOR ELECTRICAL DEVICES - SLEEVE TERMINALS AND SIDE OPENING SLEEVE TERMINALS - PRINCIPAL DIMENSIONS AND CORRELATION |
| VDE 0607 : 1974 | VDE SPECIFICATIONS FOR CLAMP SITES OF SCREWLESS TERMINALS FOR CONNECTING OR JOINING COPPER CONDUCTORS OF 0.5 MM[2] TO 16 MM[2] |
| DIN 40014 : 1985 | PROTECTIVE INSULATION; GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT; PLATES |
| VDE 0604-1 : 2014-05 | Cable trunking systems and cable ducting systems for electrical installations Part 1: General requirements; |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| DIN 49200:1987-12 | SWITCHES UP TO 16 A 250 V FOR FLUSH AND SURFACE MOUNTING |
| VDE 0341-200 : DRAFT 81 | SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - METHODS OF TEST |
| DIN 53480 : 1976 | VDE-BESTIMMUNG FUER ELEKTRISCHE PRUEFUNGEN VON ISOLIERSTOFFEN; KRIECHSTROMFESTIGKEIT |
| DIN 57470-1 : 1984 | TESTING EQUIPMENT AND TESTING METHODS; TESTING OF PROTECTION AGAINST CONTACT; IEC TESTING FINGER |
| DIN 40053-4:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, JET NOZZLE |
| DIN 57609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
| VDE 0605 : 1982 | CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS |
| VDE 0632 : DRAFT AMD 4 88 | SCHALTER FUER HAUSHALT UND AEHNLICHE ORTSFESTE ELEKTRISCHE INSTALLATIONEN |
| DIN 57100-200 : 1982 | ERRICHTEN VON STARKSTROMANLAGEN MIT NENNSPANNUNGEN BIS 1000 V; ALLGEMEIN GLTIGE BEGRIFFE |
| VDE 0609-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0.2 MM[2] UP TO 35 MM[2] |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| VDE 0282-804 : 1992 | RUBBER CABLES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - ORDINARY TOUGH RUBBER-SHEATHED FLEXIBLE CABLES 05RR |
| VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V, 25 A |
| DIN 57250-204 : 1983 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC-SHEATHED CABLE |
| DIN 46320-2:1973-01 | ADAPTERS FOR SCREWED GLANDS FOR GENERAL APPLICATION |
| VDE 0470 : 1961 | RULES FOR TESTING EQUIPMENT AND TESTING METHODS |
| DIN 30600:1985-11 | GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION |
| DIN 57605 : 1982 | CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS |
| VDE 0107 : 1994 | ELECTRICAL INSTALLATIONS IN HOSPITALS AND LOCATIONS FOR MEDICAL USE OUTSIDE HOSPITALS |
| DIN 57609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS |
| VDE 0220-1 : 1971 | SPECIFICATION FOR DETACHABLE CABLE CLAMPS TO BE USED IN POWER CABLE INSTALLATIONS UP TO 1000 V |
| DIN 46320-1:1985-09 | SCREWED GLANDS FOR CABLES; GENERAL APPLICATION; DIMENSIONS, MOUNTING INSTRUCTIONS |
| DIN 46320-3:1973-01 | FLAT NUTS FOR SCREWED GLANDS WITH STEEL CONDUIT THREAD |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| VDE 0308 : 1929 | RECOMMENDATION FOR PRODUCING STANDARD AIR HUMIDITY OR TESTING ELECTRICAL INSULATING MATERIALS |
| DIN 46274:1973-11 | SLEEVE TERMINALS B |
| VDE 0100-200 : 2006-06 | Low-voltage installations – Part 200: Definitions (IEC 60050-826:2004, modified) |
| DIN 46284:1972-11 | TWO- AND THREE-POLE SOCKET TERMINAL STRIPS (APPLIANCE TERMINALS) 380 V A.C. AND 440 V D.C. FOR CONDUCTORS UP TO 2.5 MM[2] |
| VDE 0282-810 : 1992 | RUBBER CABLES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - RUBBER SHEATHED FLEXIBLE CABLES 07RN |
| DIN 57604 : 1977 | VDE SPECIFICATION FOR DUCTS AND ACCESSORIES OF PLASTIC MATERIAL FOR ELECTRICAL INSTALLATIONS |
| VDE 0110 : 1972 | SPECIFICATION FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT |
| VDE 0170-1 : 2014 | EXPLOSIONSGEFAEHRDETE BEREICHE - TEIL 0: BETRIEBSMITTEL - ALLGEMEINE ANFORDERUNGEN (IEC 60079-0:2011, MODIFIZIERT +COR.:2012+COR.:2013) |
| VDE 0471-2-1 : 84 DRAFT 92 | FIRE HAZARD TESTING; TEST METHODS; GLOW WIRE TEST AND GUIDANCE |
| VDE 0611-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| DIN 49075 : 1952 | INSTALLATION MATERIAL; COVERING PLATE AND INSET FOR SWITCHES AND ELECTRIC SOCKETS, MAIN DIMENSIONS |
| VDE 0108 : 1979 | ERECTION AND OPERATION OF POWER INSTALLATIONS IN COMMUNAL FACILITIES AND EMERGENCY LIGHTING FOR WORKING AND BUSINESS PREMISES |
| DIN 40053-1:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS |
| DIN 40053-2:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, OSCILLATING TUBE |
| VDE 0609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
| VDE 0100 : 1973 | REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
| VDE 0341-100 : DRAFT 81 | SPECIFICATION FOR FLEXIBLE INSULATING SLEEVING - DEFINITIONS & GENERAL REQUIREMENTS |
| DIN 46320-4:1973-01 | LOCK FOR SCREWED GLANDS |
| DIN 46289-1:1984-01 | TERMINALS FOR ELECTRICAL PURPOSES; CLASSIFICATION, DEFINITIONS, TECHNICAL TERMS |
| VDE 0604-2 : 1986 | TRUNKING MOUNTED ON WALLS AND CEILINGS FOR ELECTRICAL INSTALLATIONS - PART 2: TRUNKING FOR APPLIANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.