EN 13108-21:2016
Current
The latest, up-to-date edition.
Bituminous mixtures - Material specifications - Part 21: Factory Production Control
15-06-2016
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Control procedures
6 Inspection and testing
7 Non-conformity
8 Inspection, measuring and test equipment
9 Records
10 Competence and Training
Annex A (normative) - Tolerances and test frequencies
for finished bituminous mixtures
Annex B (normative) - Initial inspection and assessment
of factory and Factory Production Control and
continuous surveillance of Factory Production Control
for bituminous mixtures
Annex C (informative) - Additional testing
Annex D (informative) - Special requirements for airfields
Bibliography
This European Standard specifies both quality and Factory Production Control requirements for use during the manufacture of bituminous mixtures intended for use on roads, airfields and other trafficked areas.Additional testing carried out within contracts is beyond the scope of this European Standard.The Factory Production Control will be applied to European Standards for bituminous mixtures if CE-marking under CPR is applied. It may also be part of quality control in situations where CE-marking does not apply. As such, manufacturers factories’ notified to issue CE Marking for production of bituminous mixtures should not require duplicate or additional auditing for those situations where CE-marking does not apply.This European Standard is applicable to the control of bituminous mixture where the constituents and target composition are known, and have been shown by means of Type Testing to comply with all appropriate specified compositional, performance related or performance based requirements in EN 13108 1 to −7 and EN 13108−9.
| Committee |
CEN/TC 227
|
| DevelopmentNote |
Supersedes PREN 13108-21. (06/2016)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 13108-21 : 2017 | Identical |
| DIN EN 13108-21:2013-06 (Draft) | Identical |
| NEN EN 13108-21 : 2016 | Identical |
| NS EN 13108-21 : 2006 | Identical |
| SN 640431-21B-NA : 2008 | Identical |
| NBN EN 13108-21 : 2016 | Identical |
| BS EN 13108-21:2016 | Identical |
| UNE-EN 13108-21:2007 | Identical |
| PN EN 13108-21 : 2016 | Identical |
| SN EN 13108-21 : 2006 + AC 2008 | Identical |
| I.S. EN 13108-21:2016 | Identical |
| UNI EN 13108-21 : 2006 | Identical |
| UNI EN 13108-21:2016 | Identical |
| DIN EN 13108-21:2016-12 | Identical |
| BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
| I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
| I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-4:2016/AC:2017 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| PREN 13108-21 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| 13/30278732 DC : 0 | BS EN 13108-21 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 21: FACTORY PRODUCTION CONTROL |
| BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
| BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
| BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
| BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
| BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
| BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12697-8:2003 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 8: DETERMINATION OF VOID CHARACTERISTICS OF BITUMINOUS SPECIMENS |
| EN 12697-28 : 2000 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 28: PREPARATION OF SAMPLES FOR DETERMINING BINDER CONTENT, WATER CONTENT AND GRADING |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 12697-27:2017 | Bituminous mixtures - Test methods - Part 27: Sampling |
| EN 12697-20:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 20: INDENTATION USING CUBE OR CYLINDRICAL SPECIMENS (CY) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.