I.S. EN 13500:2003

Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated
  terms
  3.1 Terms and definitions
  3.2 Symbols, units and abbreviated terms
4 Requirements
  4.1 General
  4.2 Thermal resistance
  4.3 Mechanical resistance and stability of the system
       4.3.1 Bond strength of the base coat to the MW board
       4.3.2 Bond strength of the adhesive to the MW board
             for ETICS fixed by an adhesive
       4.3.3 Pull-off resistance of the ETICS fixed by
             mechanical fixing
  4.4 Reaction to fire
  4.5 MW boards
  4.6 Tensile strength of the reinforcement
  4.7 Liquid water permeability of the system surface
  4.8 Resistance to impact
  4.9 Resistance to penetration
  4.10 Water vapour permeability
  4.11 Durability and adhesion of the finishing material
       on the base coat
5 Test methods
  5.1 Sampling
  5.2 Conditioning
       5.2.1 Conditioning of the test specimen for the
             determination of the tensile bond strength
             of the adhesive to the thermal insulation
             material
       5.2.2 Conditioning of the test specimen in
             accordance with EN 1062-11 for the
             determination of the tensile bond strength
             of the base coat to the thermal insulation
             material, liquid water permeability of the
             system surface, resistance to impact,
             resistance to penetration, water vapour
             permeability, durability and adhesion of the
             finishing material on the base coat
  5.3 Testing
6 Designation code
7 Evaluation of conformity
8 Marking and labelling
  8.1 The entire and specific information of all
       components of the kit has to be given on an
       accompanying document that contains:
  8.2 Components conforming to this standard shall be
       clearly marked, either on the product or on the
       label with the following information:
  8.3 Additional information:
       8.3.1 Reinforcement
       8.3.2 Adhesive
       8.3.3 Base coat
       8.3.4 Finishing coat
       8.3.5 MW-Boards
       8.3.6 Rails
       8.3.7 Anchors
Annex A (normative) Factory production control
Annex B (informative) Additional information for customer
        and designers
      B.1 Resistance of the systems surface to cracking
Bibliography