IEC 60381-2:1978
Current
The latest, up-to-date edition.
Analogue signals for process control systems. Part 2: Direct voltage signals
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Russian
01-01-1978
FOREWORD
PREFACE
1 Scope
2 Definitions
3 Specified values
Applicable to analogue direct voltage signals used in industrial process measurement and control systems. lt specifies ranges of analogue direct voltage signals and the signal common; it also deals with ripple content. The analogue direct voltage signal, unlike the analogue direct current signal specified in IEC 60381-1, is not intended for transmission over long distances. This standard does not apply to signals used entirely within an element.
DevelopmentNote |
Also numbered as BS 5863-2(1980) (08/2005) Stability Date: 2018. (10/2012)
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
UNE 20800-2:1986 | Identical |
DIN IEC 60381-2:1980-06 | Identical |
CEI 65-1 : 1998 | Identical |
NEN 10381-2 : 1985 | Identical |
13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
16/30333424 DC : 0 | BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL |
CEI EN 60770-2 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
15/30324519 DC : 0 | BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
BS EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
IEC 61000-4-16:2015 RLV | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
BS EN 60947-5-7:2003 | Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Requirements for proximity devices with analogue output |
I.S. EN 62703:2013 | EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV)) |
I.S. EN ISO 15970:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
I.S. EN 60546-2:2010 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
IEC 60873:1986 | Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems |
EN 60770-1:2011 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
EN 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing |
BS EN 60873:1993 | Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems |
BS EN ISO 15970:2014 | Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor |
DIN EN 60546-2:2011-04 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
DIN EN ISO 15970:2014-09 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
06/30160085 DC : 0 | BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
CEI EN 60546-2 : 2013 | CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
BS EN 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems Guidance for inspection and routine testing |
CAN/CSA-IEC 61000-4-16:17 | Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité électromagnétique (CEM) — Partie 4-16 : Techniques d’essai et de mesure — Essai d’immunité aux perturbations conduites en mode commun dans la plage de fréquences de 0 Hz à 150 kHz (norme IEC 61000-4-16:2015 adoptée, deuxième édition, 2015:12) |
I.S. EN 61115:1994 | EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS |
BS ISO 14511:2001 | Measurement of fluid flow in closed conduits. Thermal mass flowmeters |
ISO 20456:2017 | Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids |
IEC 61000-4-16 : 2.0 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
IEC 61000-4-16:2015 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
BS EN 61000-4-16:2016 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
DIN EN ISO 15970 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008) |
BS ISO 12764:2017 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
BS ISO TR 12764:1997 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
08/30176950 DC : DRAFT JAN 2008 | BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
UNE-EN 61000-4-16:2016 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
ISO 12764:2017 | Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
CEI EN 60770-1 : 2014 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
CEI EN 60947-5-7 : 2005 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT |
API 551 : 2016 | PROCESS MEASUREMENT |
DIN EN ISO 6817:1995-11 | MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
I.S. EN ISO 6817:1996 | MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS |
08/30176946 DC : DRAFT JAN 2008 | BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
02/208756 DC : 0 | IEC 61115, ED. 2 - EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS |
UNE-EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
BS EN 60770-1:1999 | Transmitters for use in industrial-process control systems Methods for performance evaluation |
BS ISO 14224:1999 | Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
BS ISO 15970 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
CSA CEI/IEC 61000.4.16 : 2002 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ |
IEC 60947-5-7:2003 | Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
IEC 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
IEC 60770-1:2010 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation |
IEC 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
ISO 15970:2008 | Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor |
EN ISO 6817:1995 | Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992) |
EN ISO 15970:2014 | Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008) |
BS EN 60770-2:2010 | Transmitters for use in industrial-process control systems Methods for inspection and routine testing |
CEI EN 61115 : 1998 | EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS |
I.S. EN 60770-1:2011 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
ISA 50.1 : 1982 | COMPATIBILITY OF ANALOG SIGNALS FOR ELECTRONIC INDUSTRIAL PROCESS INSTRUMENTS |
I.S. EN 60947-5-7:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT |
ISO/TR 12764:1997 | Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
UNI EN ISO 15970 : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR |
API 689 : 2007 | COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
I.S. EN 60770-2:2010 | TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING |
I.S. EN 61000-4-16:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ |
ISO 14511:2001 | Measurement of fluid flow in closed conduits Thermal mass flowmeters |
ISO 6817:1992 | Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
IEC 60546-2:2010 | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
EN 60947-5-7:2003 | Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
EN 62703:2013 | Expression of performance of fluorometric oxygen analyzers in liquid media |
EN 60770-2:2010 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing |
EN 61000-4-16:2016 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
EN 61115:1993 | Expression of performance of sample handling systems for process analyzers |
BS 4671(1987) : AMD 7870 | METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS |
ASME MFC6M : 1998 | MEASUREMENT OF FLUID FLOW IN PIPES USING VORTEX FLOW METERS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.