JIS Z 8801-1:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Test sieves Part 1: Test sieves of metal wire cloth
Hardcopy , PDF
08-09-2020
Japanese, English
20-11-2006
This part of JIS Z 8801 specifies the technical requirements and corresponding test methods for test sieves of metal wire cloth used for sieve analysis test of the material in a state of powder or particle to be turned to raw material, partly-finished product or end product.
DocumentType |
Standard
|
Pages |
0
|
PublisherName |
Japanese Standards Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Reaffirmed 2016
JIS H 3100:2006 | Copper and copper alloy sheets, plates and strips |
JIS H 3270:2006 | Copper beryllium alloy, phosphor bronze and nickel silver rods, bars and wires |
JIS B 7184:1999 | Profile projectors |
JIS H 3260:2006 | Copper and copper alloy wires |
JIS B 7507:1993 | Vernier, dial and digital callipers |
JIS K 0102:2008 | Testing methods for industrial wastewater |
JIS A 5011-4:2003 | Slag aggregate for concrete Part 4: Electric arc furnace oxidizing slag aggregate |
JIS H 7202:2007 | Method for measurement of hydrogen absorption/desorption reaction rate of hydrogen absorbing alloys |
JIS A 1126:2007 | Method Of Test For Content Of Soft Particles In Coarse Aggregate By Scratching |
JIS A 5308:2003 | Ready-mixed concrete |
JIS K 0470:2008 | Determination Of Arsenic And Lead In Clay And Sand Using Energy-dispersive X-ray Fluorescence Spectrometry |
JIS A 1137:2005 | Method Of Test For Clay Lumps Contained In Aggregates |
JIS K 5600-1-4:2004 | Testing methods for paints Part 1: General rule - Section 4: Standard panels for testing |
JIS H 7205:2003 | Method of measuring discharge capacity of hydrogen absorbing alloys for a negative electrode of a rechargable nickel-metal hydride battery |
JIS A 9523:2003 | Loose Fill Thermal Insulation |
JIS K 3362:2008 | Test Method Of Household Synthetic Detergent |
JIS A 1142:2007 | Method Of Test For Fine Aggregate Containing Organic Impurities By Compressive Strength Of Mortar |
JIS Z 2616:2009 | General rules for determination of sulfur in metallic materials |
JIS S 3026:2007 | Kerosene Feeders For Oil Burning Appliances |
JIS Z 8817:2002 | Test Method For Explosion Pressure And Rate Of Pressure Rise Of Combustible Dusts |
JIS M 8712:2000 | Test Method For Determination Of Tumbler Strength Or Iron Ores |
JIS K 7230:2007 | Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds (Indophenol method) |
JIS A 1102:2006 | Method Of Test For Sieve Analysis Of Aggregates |
JIS A 1145:2007 | Method of test for alkali-silica reactivity of aggregates by chemical method |
JIS A 6206:1997 | Ground granulated blast-furnace slag for concrete |
JIS K 2151:2004 | Coke - Testing methods |
JIS D 1611-1:2003 | Automotive Parts - Lubricating Oil Filters For Internal Combustion Engines - Part 1: General Test Methods |
JIS A 8704-2:2009 | Road Construction And Maintenance Equipment - Asphalt Mixing Plants - Part 2: Standard Form Of Specifications And Testing Methods |
JIS A 1121:2007 | Method Of Test For Resistance To Abrasion Of Coarse Aggregate By Use Of The Los Angeles Machine |
JIS K 2207:1996 | Petroleum asphalts |
JIS A 1122:2005 | Method Of Test For Soundness Of Aggregates By Use Of Sodium Sulfate |
JIS A 1143:2007 | Method Of Test For Content Of Floating Particles In Lightweight Coarse Aggregate |
JIS Z 3324:1999 | Stainless steel solid wires and fluxes for submerged arc welding |
JIS K 1469:2003 | Acetylene Black For Batteries |
JIS Z 3322:2002 | Materials for stainless steel overlay welding with strip electrode |
JIS A 1147:2007 | Method Of Test For Time Of Setting Of Concrete Mixtures By Penetration Resistance |
JIS R 1653:2003 | Determination Of Content Of Coarse Particle In Fine Ceramic Powders By Wet Seizing Method |
JIS A 1801:2009 | Methods of test for production control of concrete - Method of test for sand equivalent value of fine aggregates for concrete |
JIS A 5032:2006 | Melt-solidified slag material for road construction derived from municipal solid waste and sewage sludge |
JIS R 2212-1:2006 | Methods For Chemical Analysis Of Refractory Products - Part 1: Fireclay Refractories |
JIS A 1141:2007 | Method Of Test For Particles Less Than Density Of 1.95 G/cm[3] In Aggregate |
JIS M 8813:2004 | Coal and coke - Determination of constituents |
JIS A 5011-3:2003 | Slag Aggregate For Concrete - Part 3: Copper Slag Aggregate |
JIS A 5002:2003 | Lightweight aggregates for structural concrete |
JIS A 1804:2001 | Methods Of Test For Production Control Of Concrete - Method Of Rapid Test For Identification Of The Alkali Reactivity Of Aggregate |
JIS K 1474:2007 | Test methods for activated carbon |
JIS R 2015:2007 | Methods For Chemical Analysis Of Boron Carbide Raw Materials For Refractory Products |
JIS A 1119:2005 | Method Of Test For Variability Of Freshly Mixed Concrete By Measuring Mortar And Coarse Aggregate Contents |
JIS M 8820:2000 | Coal And Coke - Determination Of Total Moisture Content Of A Lot |
JIS K 6430:2008 | Rubber Compounding Ingredients - Silica - Test Methods |
JIS R 2252-1:2007 | Test Method For Abrasion Resistance Of Refractory Products - Part 1: Method At Room Temperature |
JIS A 1134:2006 | Methods Of Test For Particle Density And Water Absorption Of Lightweight Fine Aggregates For Structural Concrete |
JIS A 1214:2001 | Test Method For Soil Density By The Sand Replacement Method |
JIS Z 0312:2004 | Non-metallic blast-cleaning abrasives |
JIS K 7390:2003 | Testing methods for reclaimed poly (ethylene terephthalate) (PET) moulding materials from PET bottle |
JIS Z 0311:2004 | Metallic blast-cleaning abrasives |
JIS Z 8818:2002 | Test Method For Minimum Explosible Concentration Of Combustible Dusts |
JIS A 9504:2004 | Man made mineral fibre thermal insulation materials |
JIS TR A0014:2001 | Chemical Admixtures For Concrete |
JIS K 6220-1:2001 | Rubber compounding ingredients - Test methods Part 1: General |
JIS A 1121:2001 | Method Of Test For Resistance To Abrasion Of Coarse Aggregates By Use Of The Los Angeles Machine |
JIS A 6909:2003 | Coating Materials For Textured Finishes Of Buildings |
JIS Z 2615:2009 | General rules for determination of carbon in metallic materials |
JIS A 1146:2007 | Method Of Test For Alkali-silica Reactivity Of Aggregates By Mortar-bar Method |
JIS A 6005:2005 | Asphalt Roofing Felts |
JIS K 1467:2003 | Electrolytic Manganese Dioxide For Batteries |
JIS T 8147:2003 | Personal eye protectors |
JIS K 7369:2009 | Plastics - Polyvinyl Chloride Homopolymer And Copolymer Resins - Determination Of Particle Size By Mechanical Sieving |
JIS R 2212-5:2006 | Methods For Chemical Analysis Of Refractory Products - Part 5: Chrome-magnesia Refractories |
JIS A 5023:2006 | Recycled Concrete Using Recycled Aggregate Class L |
JIS A 5011-2:2003 | Slag Aggregate For Concrete - Part 2: Ferronickel Slag Aggregate |
JIS B 2711:2005 | Shot peening |
JIS T 6127:2008 | Dental Mercury And Alloys For Dental Amalgam |
JIS R 2212-3:2006 | Methods For Chemical Analysis Of Refractory Products - Part 3: High Alumina Refractories |
JIS A 1135:2006 | Methods Of Test For Particle Density And Water Absorption Of Lightweight Coarse Aggregates For Structural Concrete |
JIS S 2120:2000 | Gas Valves |
JIS K 6828-3:2003 | Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) |
JIS A 1110:2006 | Method Of Test For Density And Water Absorption Of Coarse Aggregates |
JIS R 2016-1:2008 | Methods For Determination Of Sulphur In Refractory Products And Raw Materials - Part 1: Gravimetric And Titrimetric Methods |
JIS K 6503:2001 | Animal glues and gelatins |
JIS Z 2510:2004 | Metallic powders - Determination of particle size by dry sieving |
JIS A 1229:2007 | Geotextiles And Geotextile-related Products - Procedure For Simulating Damage Under Interlocking Concrete Block Pavement (roller Compactor Method) |
JIS G 1201:2001 | Iron and steel - General rules for analytical methods |
JIS M 8720:2001 | Iron ores - Determination of low-temperature reduction-disintegration |
JIS TR A0016:2002 | Melt-solidified Fine Aggregate For Concrete Derived From Municipal Solid Waste And Sewage Sludge (molten Slag Fine Aggregate For Concrete) |
JIS A 1115:2005 | Method Of Sampling Fresh Concrete |
JIS Z 7302-10:2002 | Densified Refuse Derived Fuel - Part 10: Test Method For Disintegrated Contents |
JIS M 8706:2008 | Iron Ores And Direct Reduced Iron - Determination Of Size Distribution By Sieving |
JIS A 5011-1:2003 | Slag aggregate for concrete Part 1: Blast furnace slag aggregate |
JIS A 5031:2006 | Melt-solidified slag aggregate for concrete derived from municipal solid waste and sewage sludge |
JIS A 1126:2001 | Method Of Test For Soft Particles In Coarse Aggregates By Use Of Scratch Tester |
JIS A 5005:2009 | Crushed Stone And Manufactured Sand For Concrete |
JIS M 8514:2003 | Metallurgical Grade Fluorspar - Methods For Chemical Analysis |
JIS A 5041:2009 | Crushed Stone Powder For Concrete |
JIS R 2011:2007 | Methods For Chemical Analysis Of Refractories Containing Carbon And/or Silicon-carbide |
JIS M 8801:2004 | Coal - Testing methods |
JIS R 2212-2:2006 | Methods For Chemical Analysis Of Refractory Products - Part 2: Silica Refractories |
JIS A 1132:2006 | Method of making and curing concrete specimens |
JIS A 6023:2005 | Perforated Asphalt Roofing Felts |
JIS TR A0015:2002 | Crushed Stone Powder For Concrete |
JIS K 6220-2:2001 | Rubber compounding ingredients - Test methods Part 2: Organic accelerators and vulcanizing agents |
JIS A 6022:2005 | Stretchy Asphalt Roofing Felts (synthetic Fiber Base) |
JIS K 0083:2006 | Methods for determination of metals in flue gas |
JIS R 2212-4:2006 | Methods For Chemical Analysis Of Refractory Products - Part 4: Magnesite And/or Dolomite Refractories |
JIS K 1901:2003 | Calcium Carbide |
JIS A 5021:2005 | Recycled aggregate for concrete-class H |
JIS R 2252-2:2007 | Test Method For Abrasion Resistance Of Refractory Products - Part 2: Method At Elevated Temperature |
JIS TR A0017:2002 | General Waste And Sewage Sludge Etc. Melt-solidified Products Derived Aggregate For Road Construction (molten Slag Aggregate For Road Construction) |
JIS R 9011:2006 | Test Methods Of Lime |
JIS P 8207:1976 | Method of screening test of paper pulp |
JIS K 6910:2007 | Testing Methods For Phenolic Resins |
JIS L 1920:2007 | Testing methods for efficacy against house dust mite of textiles |
JIS K 2246:2007 | Rust preventive oils |
JIS K 2220:2003 | Lubricating grease |
JIS A 5022:2007 | Recycled Concrete Using Recycled Aggregate Class M |
JIS M 8511:2005 | Methods for industrial analysis and testing of natural graphite |
JIS R 2216:2005 | Methods for X-ray fluorescence spectrometric analysis of refractory products |
JIS M 8108:2008 | Chromium, manganese and ferruginous manganese ores - Sampling, sample preparation and determination of moisture content and size distribution |
JIS A 1144:2001 | Methods Of Test For Chloride Concentration In Water Of Fresh Concrete |
JIS K 4810:2003 | Testing Methods Of Explosives |
JIS TS A0006:2004 | Concrete Using Recycled Aggregate |
JIS A 6202:1997 | Expansive additive for concrete |
JIS M 8811:2000 | Coal And Coke - Sampling And Sample Preparation |
JIS K 6954:2008 | Plastics - Determination Of The Degree Of Disintegration Of Plastic Materials Under Simulated Composting Conditions In A Laboratory-scale Test |
JIS K 6222-1:2004 | Rubber Compounding Ingredients - Sulfur - Methods Of Test |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.