MIL-STD-769 Revision K:2015
Current
Current
The latest, up-to-date edition.
Insulation Requirements for U.S. Naval Vessels
Available format(s)
PDF
Language(s)
English
Published date
29-06-2015
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Gives the insulation requirements and installation procedures for insulation on piping, machinery, uptakes, mechanical equipment, refrigerated spaces, vent ducts and compartments on U.S. Naval vessels.
This standard provides the insulation requirements and installation procedures for insulation on piping, machinery, uptakes, mechanical equipment, refrigerated spaces, vent ducts and compartments on U.S. Naval vessels.
| DocumentType |
Standard
|
| Pages |
117
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-B-24535 Revision A:1989 | BURNER, CARBON MONOXIDE AND HYDROGEN, CATALYTIC TYPE (MARK V) |
| MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASTM F 683 : 2014 : REDLINE | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| MIL-B-23401 Revision E:1989 | BURNER, CARBON MONOXIDE AND HYDROGEN, CATALYTIC TYPE (MARK 4 E) NAVAL SUBMARINE USE |
| MIL-B-45530 Revision A:1988 | BOOSTER, AMMUNITION, ELECTRIC, CALIBER .50 |
| ASTM F 1267 : 2015-12 | SPECIFICATION FOR METAL, EXPANDED, STEEL |
| SAE AMS QQ A 250/8 : 2014 | ALUMINUM ALLOY 5052, PLATE AND SHEET |
| MIL-S-24149-4 Revision C:1989 | STUDS, WELDING, TYPE 6, CLASS 1, 2, 3, CARBON STEEL, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING |
| MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
| ASTM C 449 : 2007 | Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| MIL-C-22395 Revision B:1980 | COMPOUND, END SEALING, THERMAL INSULATION PIPE COVERING FIRE, WATER AND WEATHER RESISTANT |
| MIL-C-2861 Revision E:1988 | CEMENT, INSULATION, HIGH TEMPERATURE |
| MIL-D-3134 Revision J:1988 | DECK COVERING MATERIALS |
| UU-B-790 Revision A:1968 | BUILDING PAPER, VEGETABLE FIBER, (KRAFT, WATERPROOFED, WATER REPELLENT AND FIRE RESISTANT) |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| MIL-A-24456 Base Document:1971 | ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE |
| MIL-STD-3020 Base Document:2007 | FIRE RESISTANCE OF U.S. NAVAL SURFACE SHIPS |
| MIL-PRF-2819 Revision H:2013 | INSULATION BLOCK, THERMAL |
| MIL-P-15280 Revision J:1988 | PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
| MIL I 2781 : F | INSULATION, PIPE THERMAL |
| MIL-PRF-32514 Base Document:2015 | INSULATION, ANTI-SWEAT, REFRIGERANT, AND THERMAL FOAM |
| MIL-S-24149-5 Revision C:1989 | STUDS, WELDING, TYPE 7, CLASS 1, 2, 3, ALUMINUM ALLOY, FOR STORED ENERGY (CAPACITOR DISCHARGE) ARC WELDING |
| MIL-A-24179 Revision A:1969 | ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL-L-19140 Revision E:1984 | LUMBER & PLYWOOD, FIRE RETARDANT TREATED |
| HH-P-31 Revision F:1987 | PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE |
| MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
| ASTM D 1781 : 1998 | Standard Test Method for Climbing Drum Peel for Adhesives |
| MIL-PRF-2818 Revision E:2016 | Insulation Blanket, Thermal |
| MIL-PRF-24172 Revision B:2004 | INSULATION, PLASTIC, CELLULAR FOAM, RIGID, PREFORMED AND FOAM-IN-PLACE |
| MIL-S-24149-2 Revision D:1989 | STUDS, WELDING, AND ARC SHIELDS (FERRULES); TYPE III, CLASS 1,2,3, AND TYPE IV, CLASS 1,2,3,4,5,6, ALUMINUM ALLOY, FOR DIRECT ENERGY ARC WELDING |
| MIL-PRF-32161 Base Document:2004 | INSULATION, HIGH TEMPERATURE FIRE PROTECTION, THERMAL AND ACOUSTIC |
| MIL-R-21607 Revision E:1990 | Resins, Polyester, Low Pressure Laminating, Fire-Retardant |
| MIL-PRF-24699 Revision A:2004 | ACOUSTICAL TRANSMISSION LOSS BARRIER MATERIAL |
| MIL-I-742 Revision F:1980 | INSULATION BOARD, THERMAL, FIBROUS GLASS |
| MIL-Y-1140 Revision H:1972 | Yarn, Cord, Sleeving, Cloth, and Tape-Glass |
| MIL T 2118 : 0 | TRAP, STEAM, THERMOSTATIC, NAVAL SHIPBOARD USE |
| NAVSEA T9074 AD GIB 010/1688 : 0 | REQUIREMENTS FOR FABRICATION, WELDING AND INSPECTION OF SUBMARINE STRUCTURE |
| TT-P-28 Revision H:2007 | PAINT, ALUMINUM, HEAT RESISTING |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| MIL-S-24149-1 Revision D:1988 | STUD, WELDING, AND ARC SHIELDS (FERRULES); TYPE I, CLASS 1, 2, 3, AND TYPE II, CLASS 1, 4, 5, 5A, 6, CARBON STEEL, FOR DIRECT ENERGY, ARC WELDING |
| MIL-I-16411 Revision F:1988 | INSULATION FELT, THERMAL, GLASS FIBER |
| MIL-STD-1689 Revision A:1990 | FABRICATION, WELDING AND INSPECTION OF SHIPS STRUCTURE |
| MIL-DTL-24688 Revision A:2011 | INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM |
| MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
| MIL-A-23054 Revision A:1982 | ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED |
| MIL-S-24149 Revision C:1989 | STUDS, WELDING AND ARC SHIELDS (FERRULES), GENERAL SPECIFICATION FOR |
| MIL-PRF-6855 Revision F:2009 | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR |
| ASTM C 547 : 2017 : REDLINE | Standard Specification for Mineral Fiber Pipe Insulation |
| MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
| SAE AMS QQ A 250/3 : 2014 | ALUMINUM ALLOY ALCLAD 2014, PLATE AND SHEET |
| ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| A-A-59551 Revision A:2009 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
| ASTM F 683 : 2014 : REDLINE | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| MIL-P-17549 Revision D:1981 | PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL |
$32.74
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.