|
MIL-C-81945 Revision B:1989
|
COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
|
MIL-P-6884 Revision F:1973
|
PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE |
|
TT-P-664 Revision D:1988
|
PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
|
MIL-T-22085 Revision E:1994
|
TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING |
|
TT-P-2760 Revision A:1994
|
PRIMER COATING; POLYURETHANE, ELASTOMERIC |
|
MIL-T-9906 Revision C:1988
|
TAPE, IDENTIFICATION, AEROSPACE, VEHICLE TUBING MARKER |
|
MIL-A-8243 Revision D:1985
|
ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
|
MIL-PRF-29598 Base Document:1996
|
FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE) |
|
MIL-L-46159 Revision A:1976
|
LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB |
|
MIL C 85322 : B
|
COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
|
MMM-A-122 Revision C:1978
|
ADHESIVE BUTADIENE ACRYLONITRILE BASE, MEDIUM SOLIDS, GENERAL PURPOSE |
|
MIL W 18723 : D
|
WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
|
MIL P 53030 : A
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
|
MIL-F-22735 Revision C:1980
|
FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS |
|
TT-P-1757 Revision B:1997
|
PRIMER COATING, ALKYD BASE, ONE COMPONENT |
|
TT-R-2918 Revision A:2001
|
REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
|
MIL-S-12158 Revision D:1988
|
SEALING COMPOUND, NONCURING, POLYBUTANE |
|
MIL R 007885 : C SUPP 1
|
RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR |
|
MIL A 25457 : B NOTICE 1
|
ADHESIVE, AIR DRYING, SILICONE RUBBER |
|
MIL-C-7438 Revision G:1985
|
CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
|
MIL-S-6451 Revision E:1977
|
SHIELD, PROTECTIVE, AIRCRAFT AND MISSILES |
|
MIL-W-45595 Revision D:1985
|
WASHER, RECESSED, SADDLE AND SHOULDERED METAL |
|
MIL-STD-1312-21 Base Document:1985
|
FASTENER TEST METHODS, METHOD 21, SHEAR JOINT FATIGUE CONSTANT AMPLITUDE |
|
MIL P 53022 : B
|
PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
|
SAE AS 6451 : 2013
|
SHIELDS, PROTECTIVE, AIRCRAFT AND MISSILES |
|
MIL-E-52929 Base Document:1977
|
ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY |
|
MIL C 81309 : E
|
CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
|
MIL C 7907 : A
|
CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
|
MIL P 52995 : 0
|
PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
|
MIL-D-9063 Revision B:1965
|
DESEALANT, INTEGRAL FUEL AND OIL TANKS |
|
MMM-A-1931 Base Document:1975
|
ADHESIVE EPOXY SILVER FILLED, CONDUCTIVE |
|
MIL-C-8603 Revision B:1984
|
CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
|
MIL-A-21071 Revision B:1973
|
ANTIFOGGING COMPOUND, TRANSPARENT AIRCRAFT ENCLOSURES |
|
MIL-A-47310 Base Document:1987
|
ADHESIVE SYSTEM, ADHESIVE AND PRIMER, FOR BONDING ETHYLENE-PROPYLENE RUBBER TO METAL |
|
TT-P-2756 Revision A:1996
|
POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
|
ASTM D 5105 : 2005 : R2019
|
Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
|
MIL-L-8937 Revision D:1982
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738] |
|
SAE AS 6882 : 1999
|
WATER REPELLENT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC |
|
MIL-C-83873 Revision A:1993
|
CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
|
MIL C 81904 : B
|
COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
|
TT-R-248 Revision B:1981
|
REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
|
MMM-A-134 Base Document:1970
|
ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
|
MIL L 46147 : B
|
LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
|
SAE AMS 3695 : 2014
|
ADHESIVE FILM, EPOXY-BASE, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
|
L-T-100 Revision B:1988
|
TAPE, PRESSURE-SENSITIVE ADHESIVE, POLYESTER FILM |
|
MIL L 0046010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
MIL-A-46864 Revision B:1991
|
ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
|
MIL-A-81236 Base Document:1965
|
ADHESIVE; EPOXY RESIN WITH POLYAMIDE CURING AGENT |
|
MIL L 81329 : C
|
LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737, METRIC |
|
MIL-T-21595 Revision D:1982
|
TAPES, PRESSURE-SENSITIVE ADHESIVE, MASKING, NON-STAINING, FOR AIRCRAFT PAINTING APPLICATIONS |
|
MIL-E-52835 Revision A:1977
|
ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS |
|
MIL L 52909 : NOTICE 1
|
LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
|
MIL-I-8670 Revision B:1993
|
INSTALLATION OF FIXED GUNS AND ASSOCIATED EQUIPMENT IN NAVAL AIRCRAFT |
|
TT-L-32 Revision A:1969
|
LACQUER, CELLULOSE NITRATE, GLOSS, FOR AIRCRAFT USE |
|
SAE AMS T 22085 : 1999
|
TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION & SEALING |
|
ASTM D 5105 : 2005 : R2011
|
Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
|
MIL-L-23398 Revision D:1985
|
LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
|
MIL-A-47317 Base Document:1987
|
ADHESIVE, AIR DRYING, SILICONE RUBBER |
|
MIL L 52962 : 0
|
LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
|
MIL-P-7962 Revision D:1980
|
PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
|
MIL S 22499 : C
|
SHIM STOCK, LAMINATED |
|
MIL-C-27251 Revision A:1971
|
CLEANING COMPOUND, AIRCRAFT SURFACE, LOW TEMPERATURE |
|
MIL R 83056 : 0
|
RAIN REPELLENTS, IN-FLIGHT APPLIED, AIRCRAFT WINDSHIELD |
|
MIL C 85704 : B
|
CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
|
MIL-C-81946 Base Document:1973
|
COATING SYSTEM, THERMAL INSULATION, INTUMESCENT |
|
MIL C 22750 : F
|
COATING, EPOXY, VOC-COMPLIANT |
|
MIL-R-81261 Revision A:1970
|
RAIN REPELLENT, GLASS WINDOW AND WINDSHIELD, FOR IN-FLIGHT APPLICATION |
|
MIL-C-8956 Revision A:1970
|
CLAMP, LOOP TUBE SUPPORT |
|
MIL-C-38334 Revision A:1971
|
CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
|
MIL P 19834 : B
|
PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
|
MIL L 46010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
P-C-444 Revision B:1983
|
CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
|
MIL C 6799 : J
|
COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
|
MIL-C-22542 Revision B:1987
|
CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID |
|
MIL-S-11030 Revision F:1990
|
SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
|
MIL-C-8514 Revision C:1967
|
COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
|
DOD-L-85645 Revision A:1988
|
LUBRICANT, DRY THIN FILM, MOLECULAR BONDED (METRIC) |
|
MIL C 87937 : B
|
CLEANING COMPOUND, AEROSPACE EQUIPMENT |
|
MIL-R-7885 Revision D:1988
|
RIVET, BLIND, STRUCTURAL, MECHANICALLY LOCKED SPINDLE AND FRICTION LOCKED SPINDLE, GENERAL SPECIFICATION FOR |
|
MIL C 16173 : E
|
CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
|
ASTM D 5105 : 2005
|
Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight |
|
SAE AMS T 23397 : 1998
|
TAPES, PRESSURE SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS |
|
MIL-C-81947 Revision A:1975
|
COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
|
MIL-R-81294 Revision D:1990
|
REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
|
MIL L 81352 : A
|
LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
|
MIL-R-81903 Revision A:1977
|
REMOVER, ACID ACTIVATED, FOR AMINE CURED EPOXY COATING SYSTEMS |
|
MMM-A-1754 Base Document:1973
|
ADHESIVE AND SEALING COMPOUND EPOXY METAL FILLED |
|
MIL-PRF-16173 Revision E:1993
|
CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
|
MIL-R-81835 Base Document:1971
|
REMOVER, ORGANIC COATING, HOT TANK TYPE |
|
MIL-T-23142 Revision B:1977
|
TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION |
|
MIL-P-8045 Revision B:1964
|
PLASTIC SELF-SEALING AND NON SELF-SEALING TANK BACKING MATERIAL |
|
L-P-528 Revision B:1976
|
PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED, PAPER-BACKED |
|
MIL L 25567 : D
|
LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
|
MMM-A-105 Base Document:1967
|
ADHESIVE AND SEALING COMPOUNDS CELLULOSE NITRATE BASE SOLVENT TYPE |
|
MIL P 23377 : G
|
PRIMER COATING, EPOXY, HIGH SOLIDS |
|
MIL-W-6882 Revision F:1977
|
WATER REPELLENT KIT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC |
|
MIL-A-47284 Revision A:1991
|
ADHESIVE, EPOXY RESIN BASE |
|
MIL L 46138 : 0
|
LACQUER, LUSTRELESS, ACRYLIC NITROCELLULOSE, SOLAR HEAT REFLECTING, OLIVE DRAB |
|
MIL-T-23397 Revision B:1970
|
TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS |
|
MIL-C-47121 Base Document:1974
|
COMPOUND, SEALING, POLYSULFIDE RUBBER |
|
SAE AMS R 81835 : 2008
|
REMOVER, ORGANIC COATING, HOT TANK TYPE |