We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • SAE AMS 2259 : 2012

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You have already added this standard to your Watchlist.
    Visit My Watchlist to view the full list.

    CHEMICAL CHECK ANALYSIS LIMITS, WROUGHT LOW-ALLOY AND CARBON STEELS

    Available format(s):  Hardcopy, PDF

    Superseded date:  22-10-2019

    Language(s):  English

    Published date:  01-01-2012

    Publisher:  SAE International

    Add to Watchlist

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This specification defines limits of variation for determining acceptability of the composition of wrought low-alloy and carbon steel parts and material acquired from a producer.

    General Product Information - (Show below) - (Hide below)

    Committee AMS E
    Document Type Standard
    Publisher SAE International
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AMS 6429 : 2014 STEEL BARS, FORGINGS, TUBING, AND RINGS 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6439 : 2016 STEEL SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.42 - 0.48C) (D6AC), CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED
    SAE AMS 6409E : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED
    SAE AMS 6374 : 2016 STEEL TUBING, SEAM-FREE, ROUND, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), 95.0 KSI (655 MPA) TENSILE STRENGTH
    SAE AMS 6451 : 2015 STEEL, SPRING WIRE, 1.4SI - 0.65CR (0.51 - 0.59C) (SAE 9254) OIL TEMPERED
    SAE AMS5061H:2009(R2017) STEEL, LOW CARBON BARS, AND WIRE, 0.08 - 0.20
    SAE AMS 6462 : 2016 STEEL, WELDING WIRE, 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130)
    SAE AMS 6412 : 2015 STEEL, BARS AND FORGINGS 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337)
    SAE AMS 7713 : 2016 IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED
    SAE AMS 6276 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS6450K : 2017 STEEL, SPRING WIRE 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) ANNEALED AND COLD DRAWN
    SAE AMS 5027 : 2012 WELDING WIRE 1.05CR - 0.55NI - 1.0MO - 0.08V (0.26 - 0.32C) VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
    SAE AMS 6294 : 2014 STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620)
    SAE AMS 6482 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.5SI - 1.25CR - 3.8NI - 0.50MO - 0.30V (0.40C) VACUUM REMELTED, ANNEALED
    SAE AMS 6470 : 2014 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD)
    SAE AMS 6378 : 2014 STEEL BARS, 1.0CR - 0.20MO - 0.45SE (0.39 - 0.48C) (4142H MODIFIED), DIE-DRAWN, 130 KSI (896 MPA) YIELD STRENGTH, FREE MACHINING
    SAE AMS 6263 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315)
    SAE AMS 5080 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035)
    SAE AMS 5042N : 2003(S2017) STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM FORMING GRADE
    SAE AMS 6371L : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 6260S : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310)
    SAE AMS 6356 : 2015 STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO - (0.30 - 0.35C) (4132)
    SAE AMS 5070 : 2016 STEEL, BARS AND FORGINGS, 0.18 - 0.23C (SAE 1022)
    SAE AMS 6327L : 2017 STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400)
    SAE AMS 6352 : 2013 STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)
    SAE AMS 5028 : 2013 STEEL, WELDING WIRE, 1.05CR - 0.55NI - 1.0MO - 0.07V (0.34 - 0.40C) (D6AC), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
    SAE AMS 6549 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, DOUBLE VACUUM MELTED
    SAE AMS 6308 : 2012 STEEL, BARS AND FORGINGS, 0.90SI - 1.0CR - 2.0NI - 3.2MO - 2.0CU - 0.10V (0.07 - 0.13C), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 6299 : 2014 STEEL BARS, FORGINGS, AND TUBING, CARBURIZING, 0.50CR - 1.8NI - 0.25MO (0.17 - 0.23C) (SAE 4320H)
    SAE AMS 6498 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), DOUBLE VACUUM MELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 6350 : 2015 STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 5112 : 2013 CARBON STEEL, WIRE, SPRING QUALITY MUSIC WIRE 0.70 - 1.00C COLD DRAWN
    SAE AMS 5115 : 2017 WIRE, CARBON STEEL, 0.60 - 0.75C, HARDENED AND TEMPERED
    SAE AMS 6278 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 4.1CR - 3.4NI - 4.2MO - 1.2V (0.11 - 0.15C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6473 : 2006 STEEL WELDING WIRE 0.88CR - 1.8NI - 1.6CO - 0.42MO - 0.08V (0.28 - 0.33C) (SAE 4330V) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6408 : 2018 STEEL, HOTWORK TOOL, BARS AND FORGINGS, 5.25CR - 1.5MO - 1.0V (0.35-0.45C) (H-13), ELECTROSLAG REMELTED (ESR) OR CONSUMABLE ELECTRODE VACUUM ARC REMELTED (VAR), ANNEALED
    SAE AMS 5040 : 2015 STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM DEEP FORMING GRADE
    SAE AMS 6280 : 2017 STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630)
    SAE AMS 5032 : 2013 WIRE, STEEL, 0.18-0.23C (SAE 1020), ANNEALED
    SAE AMS 5336 : 2017 STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED
    SAE AMS 5044 : 2013 STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM, HALF HARD TEMPER
    SAE AMS 6395 : 2015 STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)
    SAE AMS 6413 : 2016 STEEL, MECHANICAL TUBING 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337)
    SAE AMS 6430J : 2017 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED)
    SAE AMS 6421 : 2016 STEEL BARS, FORGINGS, AND TUBING 0.80CR - 0.85NI - 0.20MO - 0.003B (0.35 - 0.40C) (MODIFIED 98B37)
    SAE AMS 6372 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135)
    SAE AMS 6320 : 2017 STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735)
    SAE AMS 6475 : 2013 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING, 1.1CR - 3.5NI - 0.25MO - 1.2AL (0.21 - 0.26C)
    SAE AMS 5060 : 2003(S2016) STEEL, BARS, FORGINGS AND TUBING 0.13 - 0.18C (SAE 1015)
    SAE AMS 6548 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.2NI - 0.2MO (0.12 - 0.17C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS6328N : 2017 STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750)
    SAE AMS 6493 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY
    SAE AMS 6351 : 2015 STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPHEROIDIZED
    SAE AMS 6460 : 2015 WIRE, STEEL WELDING, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C)
    SAE MAM 6304 : 1994 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)
    SAE AMS 6484 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED
    SAE AMS 6459 : 2012 STEEL, WELDING WIRE, 1.0CR - 1.0MO - 0.12V (0.18 - 0.23C), VACUUM MELTED
    SAE MAM 6415 : 1998 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 6455 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150)
    SAE AMS 6304 : 2016 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C)
    SAE AMS 5034 : 2015 STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 6407 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C)
    SAE AMS 5062J : 2004(S2017) STEEL, LOW CARBON, BARS, FORGINGS, TUBING, SHEET, STRIP, AND PLATE, 0.25 CARBON, MAXIMUM
    SAE AMS 5085 : 2017 STEEL SHEET, STRIP, AND PLATE, 0.48 - 0.55C (SAE 1050)
    SAE AMS 6551 : 2013 STEEL BARS, FORGINGS AND TUBING 1.75CR - 4.0NI - 0.5MO - (0.35 - 0.40C) PREMIUM AIRCRAFT QUALITY CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6499 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 2.7SI - 0.85CR - 1.8NI - 0.4MO - 0.2V - (0.37 - 0.44C), DOUBLE VACUUM MELTED
    SAE AMS 6469 : 2016 STEEL, WELDING WIRE, 1.75MN - 0.78CR - 2.8NI - 0.85MO - (0.09 - 0.12C), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
    SAE AMS 6425 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.4MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6362 : 2014 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), 150 KSI (1034 MPA) TENSILE STRENGTH
    SAE AMS 6272 : 2014 STEEL BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.15 - 0.20C) (SAE 8617)
    SAE AMS 6438 : 2001(S2016) STEEL, SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.45 - 0.50C) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6477 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR (0.90 - 1.03C), FOR BEARING APPLICATIONS
    SAE AMS5030K:2003(S2017) Steel, Welding Wire 0.06 Carbon, Maximum(STABILIZED Aug 2017)
    SAE AMS 6423 : 2016 STEEL BARS, FORGINGS, AND TUBING, 0.92CR - 0.75NI - 0.52MO - 0.003B - 0.04V (MODIFIED 98BV40)
    SAE AMS 7304 : 2015 SPRINGS, STEEL, 0.85 - 1.05C, HARDENED AND TEMPERED AFTER FORMING
    SAE AMS 6325 : 2015 STEEL, BARS, AND FORGINGS 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) HEAT TREATED, 105 KSI (724 MPA) TENSILE STRENGTH
    SAE AMS 6358 : 2016 STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 6434 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD)
    SAE AMS 6375 : 2016 STEEL, WELDING WIRE, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6453 : 2012(S2018) STEEL, WELDING WIRE, 0.30CR - 1.8NI - 0.40MO - (0.23 - 0.28C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6461L:2001(S2016) STEEL, WELDING WIRE 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6322 : 2014 STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 6456 : 2017 STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING
    SAE AMS 6427 : 2014 STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.25 - 0.33C) (4330 MOD)
    SAE AMS 6547 : 2013 STEEL BARS, FORGINGS, AND TUBINGS, 1.0CR - 3.2NI - 0.2MO - (0.12 - 0.17C), AIRCRAFT QUALITY
    SAE AMS 5121 : 2015 SHEET AND STRIP, STEEL (0.90 - 1.04C) (SAE 1095) ANNEALED
    SAE AMS5122K : 2003(S2017) STEEL STRIP (0.90 - 1.04C) (SAE 1095) HARD TEMPER
    SAE AMS 6411 : 2018 STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE REMELTED
    SAE AMS 5075 : 2015 STEEL TUBING, SEAMLESS, 0.22 - 0.28C (SAE 1025), COLD DRAWN AND STRESS RELIEVED
    SAE AMS 5338 : 2017 STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED
    SAE AMS 5082 : 2012 STEEL TUBING, SEAMLESS, 0.31 - 0.38C (SAE 1035), STRESS RELIEVED
    SAE AMS 6396 : 2015 STEEL SHEET, STRIP, AND PLATE, 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) ANNEALED
    SAE AMS 5046 : 2017 CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025)
    SAE AMS 6495 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6357 : 2015 STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735)
    SAE AMS 6317K : 2017 STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 6349 : 2017 STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED
    SAE AMS 6312 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640)
    SAE AMS 6361 : 2014 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 6354 : 2016 STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C)
    SAE AMS 6433 : 2015 STEEL, SHEET, STRIP, AND PLATE 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD)
    SAE AMS 6509A : 2017 STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED
    SAE AMS 6385 : 2015 STEEL SHEET, STRIP, AND PLATE, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.27 - 0.33C)
    SAE AMS 6386 : 2016 STEEL SHEET AND PLATE LOW ALLOY, HEAT TREATED 90,000 PSI (621 MPA) AND 100,000 PSI (690 MPA) YIELD STRENGTH
    SAE AMS 5069 : 2001(S2016) STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018)
    SAE AMS 6292 : 2014 STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617)
    SAE AMS 6324 : 2014 STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 0.70NI - 0.25MO (0.38 - 0.43C) (8740 MODIFIED)
    SAE AMS 5036 : 2015 STEEL SHEET AND STRIP, ALUMINUM COATED, LOW CARBON
    SAE AMS 6415 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 6490 : 2014 STEEL BARS, FORGINGS, AND TUBING 4.0CR - 4.2MO - 1.0V (0.77 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6414 : 2016 STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6381 : 2017 STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140)
    SAE AMS 6517A : 2015 STEEL, BARS, AND FORGINGS, 3.5CR - 9.5NI - 18CO - 1.1MO (0.13 - 0.17C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED
    SAE AMS 6382 : 2014 STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
    SAE AMS 6468 : 2013 STEEL, WELDING WIRE, 1.0CR - 10NI - 3.8CO - 0.45MO - 0.08V (0.14 - 0.17C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6447 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.4CR (0.93-1.05C) (SAE 52100), ELECTROSLAG REMELTED
    SAE AMS 6479 : 2015 STEEL, BARS, FORGINGS, AND TUBING 1.45CR (0.93-1.05C) (SAE 52100) SPECIAL AIRCRAFT-QUALITY CLEANLINESS
    SAE AMS 6492 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C) AIRCRAFT QUALITY
    SAE AMS 6496 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C) AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 5010 : 2014 STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215)
    SAE AMS 6426 : 1990(S2016) STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 5024 : 2015 STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137)
    SAE AMS 6302K : 2017 LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.28 - 0.33C)
    SAE AMS 6282 : 2015 STEEL TUBING, MECHANICAL, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (SAE 8735)
    SAE AMS 6431 : 2017 STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6487 : 2016 STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS7301J:2003(S2017) Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case Hardened(STABILIZED Aug 2017)
    SAE AMS 6370 : 2016 STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AS 7101 : 2007 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
    SAE AMS 6265 : 2016 STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6442 : 1987 STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS
    SAE AMS 6432 : 1973 STEEL BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.43-0.49C)
    SAE AMS 5132L : 2017 STEEL, BARS, 0.90 - 1.03C
    SAE AMS 6539 : 2013 STEEL BARS, FORGINGS, AND TUBING, 1.7CR - 3.8NI - 0.3MO - (0.32-0.38 C), AIRCRAFT-QUALITY
    SAE AMS 6440 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS
    SAE AMS 6523H : 2017 STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED
    SAE AMS 6454 : 2011 STEEL, SHEET, STRIP, AND PLATE, 1.8NI - 0.80CR - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED
    SAE AMS 6491 : 2014 STEEL BARS, FORGINGS, AND TUBING 4.1CR - 4.2MO - 1.0V (0.80 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6525 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C), CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6516 : 2017 STEEL, BARS AND FORGINGS 1CR - 10NI - 7CO - 2MO - 1.3W - 0.1V - (0.28 - 0.32C) VACUUM INDUCTION MELTED, VACUUM ARC REMELTED, NORMALIZED AND ANNEALED PRECIPITATION HARDENABLE
    SAE AMS 6323 : 2017 STEEL, MECHANICAL TUBING 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740)
    SAE AMS 6250 : 2015 STEEL BARS, FORGINGS, AND TUBING, 1.5CR - 3.5NI (0.07 - 0.13C) (3310)
    SAE AS 7225 : 2015 RIVETS, CARBON STEEL, PROCUREMENT SPECIFICATION FOR
    SAE AMS 6437 : 2015 STEEL, SHEET, STRIP, AND PLATE, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11)
    SAE AMS 6373 : 2016 STEEL, WELDED TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130)
    SAE AMS 6529 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140), SPECIAL AIRCRAFT-QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 5120 : 2013 STEEL STRIP, 0.68 - 0.80C (SAE 1074)
    SAE AMS 6270 : 2014 STEEL, BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.13 - 0.18C) (SAE 8615)
    SAE AMS 6342 K:1990(S2015) STEEL BARS, FORGINGS, AND TUBING, 0.80CR - 1.0NI - 0.25MO (0.38 - 0.43C) (SAE 9840)
    SAE AMS 6274 : 2016 STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620)
    SAE AMS 5110 : 2016 CARBON STEEL, WIRE AND SPRINGS, 0.75 - 0.88C (SAE 1080), SPRING TEMPER, COLD DRAWN
    SAE AMS 6300 : 2015 STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037)
    SAE AMS 5050 : 2015 STEEL TUBING, SEAMLESS, 0.15 CARBON, MAXIMUM ANNEALED
    SAE AMS 6330 : 2017 STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C)
    SAE AMS 6346 : 2013 STEEL BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), HARDENED AND TEMPERED, 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 6424 : 2017 STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C)
    SAE AMS 6305 : 2016 STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED
    SAE AMS 6365 : 2014 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135), NORMALIZED OR STRESS RELIEVED
    SAE AMS 6471 : 2014 STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6345 : 2015 STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR OTHERWISE HEAT TREATED
    SAE AMS 6458 : 2016 STEEL, WELDING WIRE 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6277 : 2016 STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED
    SAE AMS 6428 : 2014 STEEL, BARS, FORGINGS, AND TUBING 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 MOD)
    SAE AMS 6419 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6359 : 2015 STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340)
    SAE AMS 6452E : 2012(S2017) STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.38 - 0.43C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 5045 : 2015 STEEL, SHEET AND STRIP, 0.25 CARBON, MAXIMUM HARD TEMPER
    SAE AMS 6494 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY
    SAE AMS 6443 : 1988 STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED
    SAE AMS 6303 : 2018 STEEL BARS AND FORGINGS, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.85V (0.25 - 0.30C)
    SAE AMS 6257 : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED
    SAE AMS 6267J: 2016 STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6448 : 2013 STEEL, BARS, FORGINGS AND TUBING 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150)
    SAE AMS 6281 : 2015 STEEL, MECHANICAL TUBING, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630)
    SAE AMS 5035 : 2014 STEEL, WELDING WIRE, 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C)
    SAE AMS 6360 : 2013 STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR STRESS RELIEVED
    SAE AMS 6528 : 2017 STEEL, BARS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED
    SAE AMS 6435 : 2017 STEEL, SHEET, STRIP, AND PLATE, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED
    SAE AMS 6472 : 2014 STEEL, BARS AND FORGINGS, NITRIDING 1.6CR - 0.35MO - 1.1AL (0.38 - 0.43C) (135 MOD) HARDENED AND TEMPERED, 112 KSI (772 MPA) TENSILE STRENGTH
    SAE AMS 6457E : 2017 STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 6444 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6497 : 2013 STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS
    SAE AMS 6340 : 2014 STEEL BARS, FORGINGS, AND TUBING 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 6478 : 2001 STEEL, BARS AND FORGINGS - 3.1CR - 11.5NI - 13.5CO - 1.2MO (0.21 - 0.25C) VACUUM MELTED, ANNEALED HEAT TREATABLE TO 290 KSI (1999 MPA) TENSILE STRENGTH
    SAE AMS 6264 : 2014 STEEL, CARBURIZING GRADE, BARS, FORGINGS, AND TUBING 1.2CR - 3.2NI - 0.12MO (0.14 - 0.20C) (9317)
    SAE AMS 6290 : 2013 STEEL, BARS AND FORGINGS, CARBURIZING, 1.8NI - 0.25MO (0.11 - 0.17C) (SAE 4615)
    SAE AMS 6348 : 2013 STEEL, BARS, 0.95CR - 0.20MO (0.28 TO 0.33C) (SAE 4130), NORMALIZED
    SAE AMS 6422K : 2016 STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 0.85NI - 0.20MO - 0.003B - 0.04V (0.38 - 0.43C) (MODIFIED 98BV40)
    SAE AMS 6255F : 2016 STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED
    SAE AMS 6524 : 1991 STEEL, SHEET, STRIP, AND PLATE 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C) CONSUMABLE ELECTRODE MELTED, ANNEALED
    SAE AMS 7707 : 2018 IRON, COMMERCIALLY PURE, BAR, SHEET, STRIP, AND PLATE HOT ROLLED, UNANNEALED
    SAE AS 7240 : 2015 WASHERS, SPRING LOCK, CARBON STEEL, PROCUREMENT SPECIFICATION FOR
    SAE AMS6481D:2017 STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED
    SAE AMS 6526 : 2016 STEEL, BARS, FORGINGS, TUBING, AND RINGS, 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C), CONSUMABLE ELECTRODE VACUUM REMELTED, ANNEALED
    SAE AMS 5022 : 2015 STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117)
    SAE AMS 6417 : 2015 STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED
    SAE AMS 5047G : 2007(S2017) STEEL, SHEET AND STRIP, 0.08 - 0.13C, ALUMINUM KILLED (SAE 1010), DEEP FORMING GRADE
    SAE AMS 5029 : 2013 STEEL, WELDING WIRE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING
    SAE AMS 5333 : 2017 STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.25MO (0.11 - 0.17C) (SAE 8615), NORMALIZED
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective