Name: UNI EN 500-3 : 2009
Brand: UNI

MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR SOIL-STABILISING MACHINES AND RECYCLING MACHINES

Published date

05-03-2009

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
  5.1 Lighting, signalling and marking lights
       and reflex-reflector devices
  5.2 Operation and handling
  5.3 Operator's station
  5.4 Operator's seat
  5.5 Controls and indicators
  5.6 Starting
  5.7 Stopping
  5.8 Access system to operator's station and
       to maintenance points
  5.9 Protection
  5.10 Pressurised systems
  5.11 Fire protection
  5.12 Hot surfaces
  5.13 Signal devices and warning signs
  5.14 Electrical and electronic systems
  5.15 Electro-magnetic compatibility (EMC)
  5.16 Noise and vibration
  5.17 Conveyors
6 Verification of safety requirements/measures
7 Information for the user
  7.1 Warning signals and devices
  7.2 Instruction handbook
  7.3 Marking
Annex A (normative) - Braking systems - Performance
        requirements and test procedures
Annex B (normative) - Noise test code for
        soil-stabilising machines and recycling
        machines
Annex C (normative) - Examples of soil-stabilising
        machines and recycling machines
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EC Directive 98/37/EC
Annex ZB (informative) - Relationship between this
         European Standard and the Essential Requirements
         of EU Directive 2006/42/EC

Describes the safety requirements for soil-stabilising machines and recycling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.

Committee	CT 42
DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 500-3 : 2007

Standards	Relationship
NS EN 500-3 : 2006 + A1 2008	Identical
NF EN 500-3 : 2007 + A1 2008	Identical
UNE-EN 500-3:2007	Identical
SN EN 500-3 : 2007 + A1 2009	Identical
EN 500-3:2006+A1:2008	Identical
BS EN 500-3 : 2006	Identical
DIN EN 500-3:2009-05	Identical
NEN EN 500-3 : 2006 + A1 2008	Identical
I.S. EN 500-3:2006	Identical
NBN EN 500-3 : 2006 + A1 2009	Identical

EN 500-1:2006+A1:2009	Mobile road construction machinery - Safety - Part 1: Common requirements
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 3450:2011	Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 8643:2017	Earth-moving machinery — Hydraulic excavator and backhoe loader lowering control device — Requirements and tests
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
ISO 3450:2011	Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections