VDE 0532-1 : 1982
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TRANSFORMERS AND REACTORS - GENERAL
01-12-1997
12-01-2013
1 Geltungsbereich
2 Betriebsbedingungen
3 Begriffe
4 Kenndaten
5 Leistungsschilder
6 Verschiedene Anforderungen
7 Toleranzen
8 Prüfungen
Anhang A Angaben für Anfrage und Bestellung
Anhang B Vorübergehende Nationale Abweichungen
vom HD 398-1
Zitierte Normen
Weitere Normen
Zusammenstellung wichtiger deutscher, französischer
und englischer Begriffe und ihre Zuordnung zu den
Abschnitten dieser Norm und der Teile 1 bis 5 der
IEC-Publikation 76
Diese Norm gilt für Transformatoren (einschliesslich Spartransformatoren) und Drosselspulen mit Ausnahme bestimmter, nachstehend aufgeführter Klein- und Sondertransformatoren. - Einphasentransformatoren mit Nennleistungen unter 1 kVA und Mehrphasentransformatoren mit Nennleistungen unter 5 kVA - Messwandler - Transduktoren - Transformatoren für statische Stromrichter - Transformatoren für Fernmeldegeräte - Prüftransformatoren, Röntgentransformatoren und Hochspannungstransformatoren für Sonderzwecke - Fahrzeugtransformatoren - Schweisstransformatoren. Sofern für die obenerwähnten Transformatoren oder für andere Sondertransformatoren keine DIN-Normen oder VDE-Bestimmungen bestehen, kann diese Norm ganz oder teilweise Anwendung finden.
| DevelopmentNote |
Supersedes VDE 0532-1B (07/2004)
|
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 60076-1:2011 | Corresponds |
| VDE 0532-4 : 1982 | TRANSFORMERS AND REACTORS - TAPINGS AND CONNECTIONS |
| DIN VDE 0558-1 : 1987 | SEMICONDUCTOR CONVERTORS - GENERAL SPECIFICATIONS AND PARTICULAR SPECIFICATIONS FOR LINE-COMMUTATED CONVERTORS |
| DIN 57147-1 : 1983 | INSTALLATION OF STATIONARY ELECTROSTATIC SPRAYING EQUIPMENT; GENERAL REQUIREMENTS [VDE SPECIFICATION] |
| VDE 0147-1 : 1983 | INSTALLATION OF STATIONARY ELECTROSTATIC SPRAYING EQUIPMENT - GENERAL REQUIREMENTS |
| VDE 0670-611 : 1997 | HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATIONS |
| VDE 0532-21 : 1982 | TRANSFORMERS & REACTORS - STARTING TRANSFORMERS & STARTING REACTORS |
| DIN 42508-1:1983-05 | TRANSFORMERS; THREE-PHASE OIL IMMERSED TYPE POWER TRANSFORMERS WITH OFF-CIRCUIT TAP-CHANGER OR WITH ON-LOAD TAP CHANGER 12500 TO 80000 KVA FOR 50 HZ AND UM UP TO 123 KV; CHARACTERISTICS |
| VDE 0675-1 : 2000 COR 1 2000 | SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS |
| VDE 0532-3 : 2001 COR 1 2002 | TRANSFORMERS AND REACTORS - INSULATION LEVELS AND DIELECTRIC TESTS |
| VDE 0532-5 : 2001 | TRANSFORMERS AND REACTORS - ABILITY TO WITHSTAND SHORT CIRCUIT |
| DIN 57370-1 : 1978 | INSULATING OILS; NEW INSULATING OILS FOR TRANSFORMERS AND SWITCH GEAR |
| DIN 42500:1984-09 | THREE-PHASE OIL-IMMERSED PUBLIC DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 TO 2500 KVA, U[M] = 24 KV |
| VDE 0111-1 : 2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| DIN 42504-1:1983-05 | TRANSFORMERS - THREE-PHASE OIL IMMERSED TYPE POWER TRANSFORMERS WITH OFF-CIRCUIT TAP CHANGER OR WITH ON-LOAD TAP-CHANGER 2000 TO 10000 KVA FOR 50 HZ AND UM UP TO 123 KV - CHARACTERISTICS |
| DIN 57532-10 : 1982 | TRANSFORMERS AND REACTORS APPLICATION OF TRANSFORMERS |
| VDE 0141 : 2000 | EARTHING SYSTEMS FOR POWER INSTALLATIONS WITH RATED VOLTAGES ABOVE 1 KV |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| VDE 0433-2 : 1961 | GENERATION & MEASUREMENT OF HIGH VOLTAGES - PART 2: SPECIFICATION FOR VOLTAGE MEASUREMENT BY MEANS OF SPHERE GAPS (ONE SPHERE EARTHED |
| DIN 57141 : 1976 | SPECIFICATION FOR EARTHING IN INSTALLATIONS FOR RATED VOLTAGES ABOVE 1 KV A.C |
| VDE 0532-2 : 89 DRAFT AMD 1 | POWER TRANSFORMERS - TEMPERATURE RISE |
| VDE 0370-1 : 2012 | FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012) |
| VDE 0675-2 : 75 DRAFT 94 | SURGE ARRESTERS; GUIDE FOR SELECTION AND APPLICATION OF SURGE ARRESTERS FOR ALTERNATING VOLTAGE SYSTEMS > 1 KV |
| VDE 0102-2 : 1975 | RECOMMENDATIONS FOR THE CALCULATION OF SHORT-CIRCUIT CURRENTS - THREE-PHASE INSTALLATIONS WITH RATED VOLTAGES UP TO 1000 V |
| VDE 0532-10 : 1982 | TRANSFORMERS AND REACTORS - APPLICATION OF TRANSFORMERS |
| VDE 0536 : 1977 | LOADING GUIDE FOR OIL-IMMERSED TRANSFORMERS |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDE 0532-30 : 1998 | ON-LOAD TAP-CHANGERS |
| VDE 0555 : 1964 | REGULATIONS FOR MERCURY VAPOUR CONVERTERS (HG-POWER CONVERTERS) |
| VDE 0448-1 : 2014 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems (IEC 60507:2013); |
| VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| DIN 45635-30 : 1981 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; DETERMINATION OF TRANSFORMER & REACTOR SOUND LEVELS |
| VDE 0370-2 : 2013 | MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013) |
| DIN 57536 : 1977 | LOADING GUIDE FOR OIL-IMMERSED TRANSFORMERS |
| VDE 0532-31 : 1993 | TRANSFORMERS AND REACTORS; GUIDE TO SELECTION AND APPLICATION OF ON-LOAD TAP-CHANGERS |
| DIN 42402:1976-03 | TERMINAL MARKINGS FOR POWER TRANSFORMERS AND REACTORS |
| DIN 57102-2 : 1975 | RECOMMENDATIONS FOR THE CALCULATION OF SHORT-CIRCUIT CURRENTS; THREE-PHASE INSTALLATIONS WITH RATED VOLTAGES OF UP TO 1000 V |
| VDE 0532-4 : 1982 | TRANSFORMERS AND REACTORS - TAPINGS AND CONNECTIONS |
| VDE 0552 : 1969 | SPECIFICATION FOR VARIABLE-RATIO TRANSFORMERS HAVING CURRENT COLLECTORS WHICH ARE MOVED TRANSVERSELY TO THE DIRECTION OF THE WINDINGS |
| DIN 40108:2003-06 | ELECTRIC POWER TECHNOLOGY - CURRENT SYSTEMS - CONCEPTS, QUANTITIES, LETTER SYMBOLS |
| VDE 0530-1 : 2011 | Rotating electrical machines Part 1: Rating and performance (IEC 60034-1:2010, modified); |
| VDE 0100 : 1973 | REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
| DIN 40714-1 : 1959 | HEAVY CURRENT AND TELECOMMUNICATIONS ENGINEERING - GRAPHICAL SYMBOLS - TRANSFORMERS AND INDUCTORS |
| DIN 57370-2 : 1978 | INSULATING OILS; INSULATING OILS IN SERVICE IN TRANSFORMERS AND SWITCH GEAR |
| VDE 0551 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.