|
DIN 46248-3:1976-12
|
TAB, WITHOUT INSULATING SLEEVE, WIDTH OF TAB 6,3
|
|
DIN VDE 0605 : 1982
|
CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS
|
|
DIN VDE 0609-1 : 1983
|
SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]
|
|
DIN 41622-1:1965-01
|
MULTIPOLE CONNECTORS WITH BLADE CONTACTS 3 X 1 MM; DIMENSIONS
|
|
DIN 6797:1988-07
|
TOOTHED LOCK WASHERS
|
|
DIN VDE 0820-1 : 1992
|
MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINK
|
|
DIN 44055:1983-09
|
RESISTORS, FIXED, LACQUERED, CRACKED CARBON FILM, HIGH STABILITY, WITH LOW DRIFT AND LOW FAILURE-RATE AND WITH AXIAL LEADS
|
|
DIN 41617-1:1989-09
|
TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2.5 MM - COMMON MOUNTING FEATURES, SURVEY OF TYPES - DIMENSIONS OF TYPE L, M, N & S
|
|
DIN 40802-2:1976-02
|
METAL-CLAD BASE MATERIAL FOR PRINTED CIRCUITS; SPECIFICATIONS
|
|
DIN 40040:1987-04
|
APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS
|
|
DIN 41612-1:1988-01
|
TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; COMMON MOUNTING FEATURES, SURVEY OF TYPES
|
|
DIN 40011:1989-08
|
ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT
|
|
DIN VDE 0551-1 : 1989
|
ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS
|
|
DIN 40050:1980-07
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER
|
|
DIN VDE 0845 : 1976 AMD 1 1981
|
VDE SPECIFICATION FOR THE PROTECTION OF TELECOMMUNICATION SYSTEMS AGAINST EXCESSIVE VOLTAGES
|
|
DIN VDE 0800-2 : 1985
|
TELECOMMUNICATIONS - EARTHING AND EQUIPOTENTIAL BONDING
|
|
DIN 41618-1:1966-10
|
MULTIPOLE CONNECTORS WITH BLADE CONTACTS 2,5 MM X 1 MM; DIMENSIONS
|
|
DIN 67527-1:2016-07 (Draft)
|
PHOTOMETRIC PROPERTIES OF SIGNAL LIGHTS IN TRAFFIC - PART 1: STATIONARY SIGNALS FOR ROAD TRAFFIC
|
|
DIN 42400 : 1983
|
TERMINAL MARKINGS FOR ELECTRICAL EQUIPMENT - GENERAL RULES, ALPHANUMERIC SYSTEM
|
|
DIN 46008:1987-01
|
FLAT CONTACT SURFACES FOR EARTHING SCREWS; RATED VOLTAGE NOT EXCEEDS 52 KV
|
|
DIN 31051:2012-09
|
FUNDAMENTALS OF MAINTENANCE
|
|
DIN VDE 0150 : 1983
|
PROTECTION AGAINST CORROSION DUE TO STRAY CURRENTS OF D.C. INSTALLATION
|
|
DIN VDE 0620 : 1992
|
PLUGS AND SOCKET-OUTLETS UP TO 400 V 25 A
|
|
DIN VDE 0710-1 : 1969
|
SPECIFICATIONS FOR LIGHTING FITTINGS WITH SERVICE VOLTAGES BELOW 1000 V; GENERAL REQUIREMENTS
|
|
DIN 40705:1980-02
|
IDENTIFICATION OF INSULATED AND BARE CONDUCTORS BY COLOURS
|
|
DIN 44191:1985-12
|
FIXED RESISTORS, WIREWOUND, CEMENT COATED, WITH AXIAL LEADS
|
|
DIN 46435:1977-04
|
WINDING WIRES - ROUND COPPER WIRES, INSULATED, ENAMELLED - DIMENSIONS AND D.C. RESISTANCES
|
|
DIN 67544:1985-11
|
CYLINDRICAL COLUMNS FOR TRAFFIC LIGHTS, MEASURES
|
|
DIN VDE 0105-1 : 1983
|
OPERATION OF POWER INSTALLATIONS; GENERAL REQUIREMENTS
|
|
DIN VDE 0660-101 : 1992
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS
|
|
DIN 40041:1990-12
|
DEPENDABILITY; CONCEPTS
|
|
DIN 46247-3:1973-05
|
RECEPTACLES FOR TABS SIZE 6.3, WITHOUT INSULATING SLEEVE
|
