API 2217A : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
Available format(s)
Hardcopy , PDF
Superseded date
18-02-2021
Language(s)
English
Published date
01-01-2009
Publisher
1 Scope and Special Considerations
2 Normative References
3 Terms and Definitions
4 CLSM 1 Management Systems and Organization
5 CLSM 2 Air Quality
6 CLSM 3 Design and Operation of Breathing Air Supply System
7 CLSM 4 Control of the Space - Entry Conditions and Ongoing
Monitoring
8 CLSM 5 Response to Emergency Conditions
Annex A - Other Considerations
Bibliography
Gives guidance for safely entering and working within and near confined spaces that have inert atmospheres.
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API MPM CH17.4 SPANISH : 2016 | Marine Measurement: Method for Quantification of Small Volumes on Marine Vessels (OBQ/ROB) |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| API 2009 : 2002 : R2007 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 55 :1995 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API RP 75:2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 572 CHINESE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
| API MPM CH17.10.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.10: MEASUREMENT OF CARGOES ON BOARD MARINE GAS CARRIERS - PART 2: LIQUEFIED PETROLEUM AND CHEMICAL GASES |
| API MPM CH17.10.1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.10: MEASUREMENT OF CARGOES ON BOARD MARINE GAS CARRIERS - PART 1: LIQUEFIED NATURAL GAS |
| API 939-E : 2013 | IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| API 75 : 2004 : R2013 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| API 572 REDLINE : 2009 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API RP 1604 : 1996 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
| API RP 68 : 1998 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| API 932B : 2012 | DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS |
| NACE SP 01 70 : 2012 | PROTECTION OF AUSTENITIC STAINLESS STEELS AND OTHER AUSTENITIC ALLOYS FROM POLYTHIONIC ACID STRESS CORROSION CRACKING DURING A SHUTDOWN OF REFINERY EQUIPMENT |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| 11/30230600 DC : 0 | BS ISO 10976 - REFRIGERATED LIGHT HYDROCARBON FLUIDS - MEASUREMENT OF CARGOES ON BOARD MARINE LNG CARRIERS |
| API 1604 : 1996 : R2010 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
| BS ISO 10976:2012 | Refrigerated light hydrocarbon fluids. Measurement of cargoes on board LNG carriers |
| API 68 : 1998 : R2010 | RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| API MPM CH8.2 SPANISH : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF LIQUID PETROLEUM AND PETROLEUM PRODUCTS |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 75 : 2019 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| API 574 REDLINE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 75L : 2007 : R2013 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| API 55 : 1995 : R2013 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 55 : 1995 : R2007 | RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE |
| API 653 REDLINE : 2009 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 572 : 2016 | INSPECTION PRACTICES FOR PRESSURE VESSELS |
| API 2009 : 2002 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 945:2003 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| API 653 CHINESE : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 75 CHINESE : 2004 : R2008 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| API 945 : 2003 : R2008 | AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
| API RP 75 CHINESE : 2004 | RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES |
| NACE SP 01 81 : 2006 | LIQUID-APPLIED INTERNAL PROTECTIVE COATINGS FOR OILFIELD PRODUCTION EQUIPMENT |
| NACE SP 02 94 : 2006 | DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| API 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| API 75L : 2007 | GUIDANCE DOCUMENT FOR THE DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT SYSTEM FOR ONSHORE OIL AND NATURAL GAS PRODUCTION OPERATIONS AND ASSOCIATED ACTIVITIES |
| API 574 CHINESE : 2009 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
| ISO 10976:2015 | Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers |
| API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
| API MPM CH17.4 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.4: METHOD FOR QUANTIFICATION OF SMALL VOLUMES ON MARINE VESSELS (OBQ/ROB) |
| API 1615 REDLINE : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| ANSI Z400.1 : 2004 | HAZARDOUS INDUSTRIAL CHEMICALS - MATERIAL SAFETY DATA SHEETS - PREPARATION |
| CGA SA 17 : 2007(R2009) | SAFETY ALERT, HAZARDS OF NITROGEN/INERT GAS CREATING AN OXYGEN-DEFICIENT ATMOSPHERE |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| CGA G 7 : 2014 | COMPRESSED AIR FOR HUMAN RESPIRATION |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| CGA SB 2 : 2014 | OXYGEN-DEFICIENT ATMOSPHERES |
| CGA SB 15 : 2009 | MANAGING HAZARDS IN CONFINED WORK SPACES DURING MAINTENANCE, CONSTRUCTION, AND SIMILAR ACTIVITIES |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| CGA SA 16 : 2005(R2009) | SAFETY ALERT, BLENDED BREATHING AIR FATALITIES |
| CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
| API 2220 : 2011 | CONTRACTOR SAFETY PERFORMANCE PROCESS |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| API 2221 : 2011 | CONTRACTOR AND OWNER SAFETY PROGRAM IMPLEMENTATION |
| ANSI/ASSE Z244.1 : 2016 | THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS |
£125.22
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English - DRM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.